Study guide

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP

Key Takeaways Explain This Topic AI

The FAA mechanic path uses three separate knowledge tests, AMG (60 questions), AMA (100), and AMP (100), each with a 70% pass mark; all tests, including the oral and practical, must be passed within 24 months (14 CFR 65.71(a)(3)).

Schedule General first because its electricity, math, weight-and-balance, and human-factors content underpins both rating exams.

Use the Aviation Mechanic ACS code coverage, FAA-H-8083 handbooks, supplement practice, and an error log rather than chasing confidential live item content.

Leave recovery time between tests so each Airman Knowledge Test Report can steer oral-and-practical remediation.

Last updated: October 2026

Three Tests, One Integrated Cram

This is the capstone. The FAA Aviation Mechanic certificate (governed by 14 CFR Part 65 ) carries an Airframe (A) rating, a Powerplant (P) rating, or both. Earning a rating means passing the relevant knowledge (written) tests , then the Oral & Practical (O&P) with a Designated Mechanic Examiner (DME) . There are three knowledge tests, not one: Aviation Maintenance Technician General (AMG) , Airframe (AMA) , and Powerplant (AMP) . AMG lists 60 questions ; AMA and AMP list 100 questions each.

All three knowledge tests allow 2.0 hours and require 70% to pass, and all prescribed tests, from the first Airman Knowledge Test Report (AKTR) through the O&P, must be passed within 24 months (14 CFR 65.71(a)(3)).

Do not build a final calendar around one giant bundled exam. Build it around three starts, three pacing plans, and three AKTR outcomes. Place General first : the FAA's mechanic test-requirements page says to take the General knowledge test first, followed by Airframe and/or Powerplant, and its content, basic electricity, aircraft drawings, weight and balance, physics, materials and processes, fluid lines, cleaning and servicing, maintenance records, inspections, and the Dirty Dozen human factors, supports reasoning on both rating exams.

  • Final-review window Main purpose Output
  • 14 to 10 days out Close broad ACS gaps across G/A/P Updated weak-area list
  • 9 to 6 days out Drill calculations and supplement use Fewer unit and figure errors
  • 5 to 3 days out Mixed timed sets at test length Pacing plan per test
  • 2 days before each test Light review and logistics check Confirmed appointment and documents
  • Same day after each test Read AKTR and capture ACS codes Remediation list for the DME bridge
  • Between tests Target weak ACS areas Stronger O&P readiness

High-Yield Anchors to Re-Read by Subject

A last pass should re-touch core facts in each test. For General , review electrical relationships, weight-and-balance calculations, safety practices, and the distinction between 43.9 maintenance and 43.11 inspection record entries. For Airframe , review rivet selection and layout, including edge distance and pitch under the applicable repair data; MIL-H-5606 (mineral) versus Skydrol (phosphate-ester) hydraulic fluids that must never be mixed; and the pitot-static instruments (altimeter, airspeed, vertical speed).

For Powerplant : the four-stroke Otto cycle (intake, compression, power, exhaust); the magneto as a self-contained ignition source with an impulse coupling for starting; mineral versus ashless-dispersant oil; and the propeller governor using flyweights and a pilot valve to control blade angle.

A Disciplined Final-Schedule Method

Take AMG first, as the FAA's test-requirements page directs, then order AMA and AMP by readiness and appointment availability.

Book each appointment only after your authorization document (Form 8610-2, AMTS document, or military COE) is in hand.

Assign each day one primary ACS cluster plus one recurring records-or-safety review habit.

Build in supplement practice for drawings, charts, tables, and embedded images .

Use timed blocks matching the 60-question and 100-question pacing demands.

Reserve time after each test to mine AKTR ACS codes .

Keep DME preparation active throughout rather than waiting until all writtens are done.

A compressed schedule works only if your practice data is honest. Recognizing reused questions is not readiness for the knowledge and skills described in the FAA ACS; train on unfamiliar wording, figure interpretation, calculations with units, and out-loud explanation of why an answer is correct. Avoid any source claiming to sell current live FAA item content, the FAA does not publish it. Do not stack three tests back to back: fatigue erodes accuracy, and even a passing AKTR can flag weak ACS areas worth closing before the DME oral.

The best calendar is not the most aggressive one, it is the one that passes all three writtens while preserving the judgment, documentation habits, and hands-on readiness certification demands.

Eligibility and the Experience Routes Behind the Calendar

Your calendar sits inside a larger certification structure that is worth re-confirming in the final pass. To be eligible for a mechanic certificate under 14 CFR Part 65 you must be at least 18 years old and able to read, write, speak, and understand English . Two experience routes feed the knowledge tests and the eventual O&P.

The first is documented practical experience : at least 18 months for a single rating (Airframe or Powerplant alone) or 30 months working on both airframes and powerplants concurrently for both ratings, signed off using FAA Form 8610-2 . The second is graduation from an FAA-approved Part 147 Aviation Maintenance Technician School (AMTS) , which issues authenticated graduation documentation in place of the experience time.

  • Route Time / basis Authorization document
  • Single rating, experience 18 months on that area FAA Form 8610-2
  • Both ratings, experience 30 months on both FAA Form 8610-2
  • Part 147 AMTS graduate Program completion Authenticated AMTS documentation
  • Eligible military pathway Service maintenance experience Military Certificate of Eligibility

Knowing your route shapes the calendar. An AMTS graduate often takes all three writtens close together because school content is fresh and structured around the ACS. An experience-route candidate may need more deliberate spacing to fill gaps that on-the-job work never touched, for example weight-and-balance math or the records and human-factors material that General also covers.

Either way, the testing matrix the guide references (the September 25, 2026 Airman Knowledge Testing Matrix) is the authority for current question counts and timing, and the Aviation Mechanic ACS is the authority for content. Build the calendar from those two documents plus your AKTR feedback, never from rumor about what is on the test.