Study guide
12.4 Formula, Supplement, and Embedded-Image Final Review
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
12.4 Formula, Supplement, and Embedded-Image Final Review
Key Takeaways Explain This Topic AI
General anchors: Ohm's law E = I x R, power P = I x E, CG = total moment / total weight from the datum, plus corrosion types, the five NDT methods, and the Dirty Dozen.
Airframe anchors: rivet edge distance 2D-2.5D and pitch 4-6D, MIL-H-5606 vs Skydrol fluids that must not be mixed, and pitot-static instruments.
Powerplant anchors: the four-stroke Otto cycle, the magneto with impulse coupling, mineral vs ashless-dispersant oil, and the propeller governor's flyweight-and-pilot-valve control.
Practice formulas, supplement figures, and embedded images as reasoning tools, then explain each answer out loud to transfer knowledge to the DME oral.
Last updated: October 2026
The High-Yield General Sheet
A formula list helps only if you understand each relationship. For electricity , master Ohm's law (E = I x R) and power (P = I x E) , and the series-versus-parallel rules: in series, current is the same everywhere and resistances add; in parallel, voltage is the same across branches and total resistance is less than the smallest branch. For weight and balance , anchor the chain moment = weight x arm and CG = total moment / total weight , all distances measured from the datum , and remember a negative arm sits forward of the datum. The other General must-knows live in the table below.
- General topic Tested fact to lock in
- Ohm's law E = I x R; power P = I x E = I-squared x R
- Weight & balance CG = total moment / total weight, measured from the datum
- Corrosion types surface, intergranular, galvanic (dissimilar metals), filiform
- NDT methods dye penetrant, magnetic particle, eddy current, ultrasonic, radiographic
- Records 14 CFR 43.9 (maintenance), 43.11 (inspection) logbook entries
- Human factors the Dirty Dozen, 12 common error preconditions
The Dirty Dozen is a frequent General item: lack of communication, complacency, lack of knowledge, distraction, lack of teamwork, fatigue, lack of resources, pressure, lack of assertiveness, stress, lack of awareness, and norms. NDT distinctions also recur, magnetic particle works only on ferromagnetic parts, while eddy current and dye penetrant suit non-ferrous and surface-breaking cracks, and radiographic reveals internal flaws.
The High-Yield Airframe and Powerplant Sheets
5D (two to two-and-a-half rivet diameters from the center of the hole to the edge, never less than 2D or more than 4D), and rivet pitch of 4D to 6D center to center within a row (minimum about 3D). 5D minimum. Hydraulic fluids are a classic trap: MIL-H-5606 is a mineral-base fluid (red), while Skydrol is a fire-resistant phosphate-ester fluid (purple), and the two are chemically incompatible and must never be mixed.
The pitot-static instruments, the altimeter, airspeed indicator, and vertical speed indicator, all run off the pitot and static pressure system.
- Rating Anchor Tested value
- Airframe Rivet edge distance 2D to 2.5D (not less than 2D, not more than 4D)
- Airframe Rivet pitch 4D to 6D center to center
- Airframe Hydraulic fluids MIL-H-5606 (mineral) vs Skydrol (phosphate-ester), never mixed
- Airframe Pitot-static instruments altimeter, airspeed, vertical speed
- Powerplant Otto cycle intake, compression, power, exhaust
- Powerplant Turbine sections inlet, compressor, combustion, turbine, exhaust
- Powerplant Magneto self-contained ignition; impulse coupling aids starting
- Powerplant Oil mineral (break-in) vs ashless-dispersant (operational)
- Powerplant Propeller governor flyweights and pilot valve set blade angle
For Powerplant , the Otto cycle drives reciprocating engines through intake, compression, power, and exhaust, with one power stroke per cylinder every two crankshaft revolutions. A gas turbine follows the constant-pressure Brayton cycle through the compressor , combustion , and turbine sections; turbofan, turbojet, turboprop, and turboshaft are its variants. The magneto is a self-contained ignition source independent of aircraft electrical power; the impulse coupling retards and intensifies the starting spark.
The propeller governor uses speeder-spring-loaded flyweights and a pilot valve to port oil and change blade angle on a constant-speed prop.
Make Formulas and Figures Explainable
Build your own review sheet during study, then practice without it. Solve a calculation, then explain why the answer makes physical or maintenance sense. Read a supplement figure, then state what a mechanic would inspect or document. This transfer matters because the DME hands you no answer options, you must explain the principle and apply it safely. Embedded images change delivery, not content, so keep studying the same systems, regulations, and calculations, and log every repeated error with its cause , not just the right answer.
The Tightest Integrative Facts to Carry In
A last-pass should drill the facts examiners reuse most. On the Powerplant side, lock the firing order concept: a typical four-cylinder horizontally opposed engine fires 1-3-2-4 and a six-cylinder Continental commonly fires 1-6-3-2-5-4 , spreading power strokes evenly. Magneto timing is set so the spark occurs several degrees before top dead center ; the impulse coupling delays and snaps the spark for easy starting at low rpm.
Reciprocating oil has two faces, straight mineral oil for engine break-in (it lets rings seat) and ashless-dispersant (AD) oil for normal operation (it suspends contaminants without ash deposits). A wet-sump engine stores oil in the crankcase; a dry-sump uses a separate tank with scavenge pumps.
- Quick anchor Carry-in value
- 4-cyl firing order 1-3-2-4
- 6-cyl Continental firing order 1-6-3-2-5-4
- Magneto timing spark fires before top dead center
- Break-in oil straight mineral
- Operational oil ashless-dispersant (AD)
- Turbine power section compressor, combustion, turbine
- Constant-speed prop governor flyweights set blade angle
On the turbine side, remember the energy path: the compressor raises pressure, the combustion section burns fuel at roughly constant pressure, and the turbine extracts energy to drive the compressor (and, on a turboprop or turboshaft, a propeller or rotor through a reduction gear). Igniters fire only during starting , unlike the continuous spark of a reciprocating magneto.
For the propeller , a fixed-pitch prop has one blade angle, while a constant-speed prop uses a governor: rising rpm throws the flyweights outward, repositioning a pilot valve that ports oil to change blade angle and hold the selected rpm; feathering turns the blades edge-on to stop windmilling drag on a failed engine.
Finally, fold in a few General carry-ins that examiners love: a galvanic corrosion cell needs two dissimilar metals plus an electrolyte; dye penetrant finds only surface-breaking defects; return to service after maintenance requires the correct 14 CFR 43.9 entry while an inspection uses 43.11 ; and the Dirty Dozen names fatigue, pressure, and complacency among twelve human factors that can lead to maintenance errors. Quiz yourself on these out loud, the format that the DME oral will demand, so the knowledge transfers cleanly from screen to hangar.