Study guide
12.3 Pacing for the 60-Question and 100-Question Knowledge Tests
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
12.3 Pacing for the 60-Question and 100-Question Knowledge Tests
Key Takeaways Explain This Topic AI
AMG lists 60 questions in 2.0 hours (about 2 minutes each), while AMA and AMP each list 100 questions in 2.0 hours (about 1 minute each).
Listed counts exclude unscored validation questions, and the 2.0-hour limit includes time to answer them, so keep a steady pace.
Pacing must protect easy points: flag long calculations and dense figures, and return to them with a review buffer.
70% passes, but plan for a higher margin by preventing avoidable unit, decimal, and figure-reading losses.
Last updated: June 2026
Time Management Protects Questions You Already Know
All three AMT knowledge tests allow 2.0 hours , but the pressure is not identical. General lists 60 questions ; Airframe and Powerplant list 100 each. The FAA testing matrix notes that listed counts do not include unscored validation questions , and that the allotted time includes the time needed to answer them. So build a pacing method rather than relying on feel.
For General , the average is roughly two minutes per listed question , generous on its face but consumed by calculation-heavy and reference-heavy areas: weight and balance, electricity, math, drawings, and records. For Airframe and Powerplant , the average tightens to about one minute per listed question , so the first pass must be efficient. In every test the goal is the same: capture straightforward points early and return to slow items with a calm mind and leftover time.
- Test Listed questions Time Practical pacing target
- AMG General 60 2.0 h ~2 min per question, then a review buffer
- AMA Airframe 100 2.0 h ~1 min per question, plus a small buffer
- AMP Powerplant 100 2.0 h ~1 min per question, plus a small buffer
- Any test Validation questions appear unscored Included in time Keep moving; flag, do not stall
The first pass should be decisive but not reckless. Answer what you know, work short calculations carefully, and flag items needing a figure, a long computation, or a second look. When unsure, eliminate wrong options, choose the best remaining answer, and mark it if the software allows. Do not let anxiety on one item set the schedule for the rest of the test.
A Standard Calculation and Figure Routine
Calculations need a repeatable routine, because a fast wrong answer is still wrong. Write the relationship, substitute numbers with units , compute, then ask whether the result is reasonable. A weight-and-balance worked example: a tire and wheel weighing 40 lb at an arm of +60 in contributes a moment of 2,400 in-lb (40 x 60); divide the airplane's total moment by total weight to find CG . Most wrong answers trace to unit conversion, sign errors, decimal placement, or reading the wrong chart value, not to not knowing the formula.
Supplement and embedded-image questions need visual discipline. Read the question first , then locate the correct figure, then read labels, units, legends, and notes. Do not assume two similar figures share a scale. When a question points to a table, identify the row and column headings before pulling a number. On the final pass, revisit flagged figure items, fresh eyes catch a misread unit.
Pacing Plan
Open with a quick scan of the interface and the tools the center allows.
Run the first pass without letting one item blow past your planned limit.
Flag long calculations, dense figures, and uncertain wording.
At the halfway time point, compare progress against the halfway question point.
Preserve a review buffer for flagged questions and accidental omissions.
Change an answer only for a clear reason, a corrected calculation or a reread reference detail.
The passing score is 70% , but your pacing plan should aim higher by preventing avoidable losses. Treat the validation questions as ordinary items, you cannot identify them and they ride inside the same clock, so a steady tempo serves you better than hunting for which questions count. Protect the points you can earn, and make the hardest questions compete for leftover time rather than letting them dominate the exam.
Worked Pacing Math and the Two-Pass Method
Turn the abstract limits into checkpoints. On General , 60 questions in 120 minutes is 2 minutes each ; aim to finish the first pass of all 60 by about the 90-minute mark, leaving 30 minutes for flagged calculations and a final sweep. On Airframe or Powerplant , 100 questions in 120 minutes is about 72 seconds each ; target the first pass by roughly the 95-to-100-minute mark and hold 20-to-25 minutes for flagged items. A simple checkpoint rule: at the halfway clock (60 minutes) you should be near question 30 on General or near question 50 on a rating test.
- Test First-pass target Review buffer
- AMG General (60) ~90 minutes ~30 minutes
- AMA Airframe (100) ~95-100 minutes ~20-25 minutes
- AMP Powerplant (100) ~95-100 minutes ~20-25 minutes
The two-pass method is the backbone. Pass one: answer everything you know cold, do short calculations, and flag anything requiring a long figure read or heavy math, never leave a flagged item truly blank, place a best-guess answer first so a missed return still scores a chance. Pass two: work the flagged calculations and figures with the calm of knowing the easy points are banked. This protects against the classic failure mode, spending eight minutes on one weight-and-balance problem and then rushing twelve answerable items at the end.
Guard against two specific traps. First, answer-changing : only change an answer for a concrete reason, a corrected computation or a reread reference detail, because unjustified second-guessing more often turns a right answer wrong. Second, figure tunnel vision : if a chart question stalls you, flag it and move on rather than burning minutes; a fresh look on pass two frequently reveals the misread axis or unit. Steady tempo plus a disciplined two-pass sweep is how a well-prepared candidate converts knowledge into a comfortable margin above the 70% line.