Study guide

3.2 AC/DC Measurement and Schematic Troubleshooting

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

3.2 AC/DC Measurement and Schematic Troubleshooting

Key Takeaways Explain This Topic AI

Measure voltage with the meter in parallel across the load, and measure current with the meter in series so all current flows through it.

Resistance and continuity must be checked with the circuit de-energized; applying ohmmeter current to a live circuit damages the meter.

AC adds impedance (Z), which combines resistance with capacitive and inductive reactance; AC voltage is commonly stated as RMS.

A transformer changes AC voltage in proportion to its turns ratio while ideally conserving power (step-up trades current for voltage).

Systematic DC troubleshooting checks source voltage, circuit protection, switches/relays, the load, and the ground return in order.

Last updated: June 2026

Measuring Voltage, Current, and Resistance Correctly

Meter connection is a tested fundamental because the wrong setup gives wrong data or blows a fuse:

  • Measurement Meter function How to connect
  • Voltage Voltmeter (high internal resistance) In parallel across the load or two test points
  • Current Ammeter (very low internal resistance) In series so all current passes through it
  • Resistance / continuity Ohmmeter Circuit de-energized ; meter supplies its own current

A voltmeter has high resistance so it draws negligible current; placing it across a component reads the voltage drop. An ammeter has near-zero resistance and must be inserted in series; connecting an ammeter across a voltage source is a direct short. An ohmmeter uses its own internal battery, so the circuit must be de-energized and often isolated or the reading is meaningless and the meter can be damaged. Voltage-drop testing along an energized circuit pinpoints high-resistance connections (corroded terminals) that a simple continuity check can miss.

Many faults are measured with a clamp-on ammeter that reads current without breaking the circuit (it senses the conductor's magnetic field), and a multimeter combines volt, ohm, and milliamp functions. Always select the correct range before connecting - starting on the highest range and stepping down protects the meter from overload. Set the function and range to the quantity being measured; an analog meter on the wrong polarity pegs backward, and a digital meter on the wrong function gives a meaningless reading.

Continuity mode confirms an unbroken path (near zero ohms) or detects an open (infinite ohms), which is the fastest first check for a suspected broken wire.

AC Versus DC: Impedance, RMS, and Transformers

Direct current (DC) flows one direction at steady polarity; aircraft DC buses are typically 14 V or 28 V. Alternating current (AC) reverses direction cyclically; large transport aircraft generate 115 V / 400 Hz AC. The higher 400 Hz frequency lets transformers and motors be smaller and lighter than the 60 Hz used on the ground.

In AC circuits, simple resistance is replaced by impedance (Z) , the total opposition combining resistance (R) with capacitive reactance (Xc) and inductive reactance (Xl) . Reactance depends on frequency: inductive reactance rises with frequency, capacitive reactance falls. AC voltage is usually quoted as RMS (root-mean-square) , the equivalent DC heating value; peak voltage is RMS x 1.414.

A transformer changes AC voltage by the turns ratio : E_secondary / E_primary = N_secondary / N_primary. Worked example: a transformer with 200 primary turns and 50 secondary turns fed 120 V AC outputs 120 x (50/200) = 30 V (a step-down). Ideally power is conserved, so a step-down raises available current while lowering voltage. Transformers work only on AC, because a changing magnetic field is required to induce secondary voltage.

Reading Schematics and Block Diagrams

Troubleshooting starts with the correct schematic diagram , which shows how a circuit functions using standardized symbols rather than physical appearance. A block diagram shows major functional units and signal flow; a wiring diagram (or pictorial) shows actual wire routing, connectors, and terminal numbers used to physically trace a harness.

Learn the common symbols: a battery (long/short parallel lines), a resistor (zigzag or rectangle), a switch (a break with a hinged contact), a relay/solenoid (a coil), a fuse or circuit breaker, a ground, and the difference between connected wires (a dot at the junction) and crossing-but-not-connected wires. Reading from source to ground, you can predict where voltage should be present at each node, which is the basis of voltage-drop fault isolation. The schematic also reveals whether loads are in series or parallel, telling you whether one failed unit should kill the others or stand alone.

Aircraft wiring also uses wire identification codes printed on the insulation that tie a physical wire back to its schematic designation, and connector/pin numbers that let you meter a specific circuit at a plug. A relay lets a small switch control a large current: a low-current coil closes heavy contacts, so the cockpit switch carries only coil current while the load current flows through the relay contacts near the load. Recognizing this on the schematic tells you to test the coil circuit and the contact circuit separately when a high-current load will not energize.

A Systematic DC Troubleshooting Sequence

Random probing wastes time and risks damage. Work the circuit in a fixed order:

Source voltage - confirm the bus or battery actually supplies rated voltage under load.

Circuit protection - check the fuse or circuit breaker; an open breaker often signals an overload or short, not just a nuisance trip.

Control devices - verify switches and relays open and close; listen and meter for relay actuation.

Conductors and connectors - voltage-drop test for corroded or loose terminals causing excessive resistance.

The load - test the lamp, motor, or actuator itself.

Ground return - a poor airframe ground mimics almost any failure and is a classic missed cause.

Three fault families cover most cases: an open (broken path, no current, full source voltage across the break), a short (unintended low-resistance path, excessive current, blown protection), and high resistance (dim lamp, slow motor, abnormal voltage drop). Always observe ESD precautions around solid-state controllers, and de-energize before ohmmeter checks.