Study guide

3.6 Physics for Aviation: Forces, Fluids, and Flight

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

3.6 Physics for Aviation: Forces, Fluids, and Flight

Key Takeaways Explain This Topic AI

Work = force x distance, and power = work / time; one horsepower equals 33,000 ft-lb per minute.

Force, pressure, and area are linked by Force = Pressure x Area, the basis of hydraulic and pneumatic force multiplication.

Boyle's Law (P1V1 = P2V2) holds temperature constant, Charles's Law (V1/T1 = V2/T2) holds pressure constant, and the combined gas law links all three using absolute temperature.

Bernoulli's Principle states that where a fluid speeds up its static pressure drops, which combines with Newton's third law to explain wing lift.

Standard atmosphere is 29.92 in Hg and 15 degrees C at sea level; high density altitude (hot, high, humid) reduces aircraft and engine performance.

Last updated: June 2026

Matter, Force, Work, and Power

Matter exists as solid, liquid, or gas, and has mass (quantity of matter) and weight (force of gravity on that mass). Force is a push or pull measured in pounds; when a force moves an object, it does work . The relationships are tested directly:

  • Quantity Formula Units
  • Work Force x Distance foot-pounds (ft-lb)
  • Power Work / Time ft-lb/min, watts, horsepower
  • Horsepower - 1 hp = 33,000 ft-lb/min = 550 ft-lb/sec

Worked example: lifting a 200-lb component 11 ft does 200 x 11 = 2,200 ft-lb of work. If a hoist does it in 1 minute, power = 2,200 ft-lb/min, which is 2,200 / 33,000 = 0.067 hp . Note that holding a weight without moving it does no work in the physics sense, because distance is zero. Energy is the capacity to do work and is conserved - it converts between potential, kinetic, heat, and electrical forms but is not destroyed.

Heat is a form of energy and is measured in British thermal units (Btu) or calories; one Btu raises one pound of water one degree Fahrenheit. Heat moves by conduction (through solids by contact), convection (by fluid movement), and radiation (by waves, needing no medium) - all three matter in engine cooling and fire protection. Temperature is the intensity of heat, read in Fahrenheit, Celsius, or the absolute scales Rankine (R = F + 460) and Kelvin (K = C + 273); the gas laws below require absolute temperature.

Thermal expansion (most materials grow when heated) is why riveted and bolted assemblies are designed with the right clearances and why some torque and fit specs are temperature-dependent.

Simple Machines and the Pressure-Force-Area Law

Simple machines (lever, pulley, wheel-and-axle, inclined plane, wedge, screw) trade force for distance to give a mechanical advantage (MA) = output force / input force . A lever's MA equals the ratio of effort arm to resistance arm; a movable pulley roughly doubles force while halving distance. No machine creates energy - it cannot output more work than is put in, so increasing force always costs distance (and friction loses a little).

For fluids, the key relationship is Force = Pressure x Area (so Pressure = Force / Area, in psi). This underlies hydraulics: a small input piston creates a pressure that acts on a larger output piston to multiply force. Worked example: a hydraulic system at 1,500 psi acting on a 3-square-inch actuator piston produces Force = 1,500 x 3 = 4,500 lb . Because pressure is equal throughout a confined fluid (Pascal's principle), a small pump force on a small area yields a large force on a large area - the trade-off again being travel distance. Pneumatics use the same law with compressible air.

The Gas Laws

Gases respond to pressure and temperature in ways that matter for tires, struts, oxygen systems, and turbine theory. Temperatures must be absolute (Rankine or Kelvin) in these laws:

  • Law Held constant Relationship
  • Boyle's Law Temperature P1 x V1 = P2 x V2 (pressure up, volume down)
  • Charles's Law Pressure V1 / T1 = V2 / T2 (heat expands gas)
  • Gay-Lussac's Law Volume P1 / T1 = P2 / T2 (heat raises pressure)
  • Combined gas law none P1 V1 / T1 = P2 V2 / T2

Worked Boyle's-Law example: 200 in^3 of gas at 30 psi compressed to 50 in^3 (temperature constant) reaches P2 = (P1 V1) / V2 = (30 x 200) / 50 = 120 psi . Charles's Law explains why a tire or strut pressure rises on a hot day - heating the trapped gas at fixed volume raises its pressure. The combined gas law is used whenever pressure, volume, and temperature all change, such as comparing a gas charge between ground and altitude conditions.

Bernoulli, Newton, Atmosphere, and Density Altitude

Bernoulli's Principle states that in a moving fluid, where velocity increases, static pressure decreases. Air accelerating over the curved upper surface of a wing has lower pressure than the slower air below, producing lift; the same principle calibrates the airspeed indicator and operates a carburetor venturi. Lift is also explained by Newton's third law - the wing deflects air downward and the equal-and-opposite reaction pushes the wing up; both views are taught together. Newton's laws also govern inertia (first law) and F = m x a (second law).

The standard atmosphere sets sea-level reference values of 29.92 in Hg (1013.2 hPa) and 15 degrees C (59 degrees F) , with pressure and temperature falling as altitude increases. Pressure altitude is altitude referenced to 29.92 in Hg; density altitude is pressure altitude corrected for non-standard temperature. High density altitude - caused by high elevation, high temperature, and high humidity - means thinner air, which reduces engine power, propeller thrust, and wing lift, lengthening takeoff and degrading climb.

For maintenance, any repair to a flight surface must preserve contour, balance, and conformity to approved data , because changing a control surface's shape or weight alters its aerodynamics and can cause flutter. Heat transfers by conduction, convection, and radiation, and thermal expansion is why clearances and torque values account for temperature.