Study guide
3.4 Weight and Balance Equations and Records
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
3.4 Weight and Balance Equations and Records
Key Takeaways Explain This Topic AI
The datum is the reference point from which all arms are measured; arms aft of the datum are positive and arms forward are negative.
Moment = weight x arm (in pound-inches); the center of gravity = total moment / total weight.
Empty-weight CG is found by weighing the aircraft on scales, subtracting tare, and dividing total moment by total weight.
Adverse-loading (extreme-condition) checks confirm the most-forward and most-aft realistic loadings still keep the CG within limits.
Equipment changes that affect weight and balance require a recalculation, an equipment-list update, and a maintenance/weight-and-balance record revision.
Last updated: June 2026
Why Weight and Balance Matters
Weight and balance (W&B) controls two safety-of-flight properties: total weight must stay within structural limits, and the center of gravity (CG) must stay within the forward and aft limits set by the manufacturer. An overweight aircraft needs more runway, climbs poorly, and overstresses structure. A CG too far forward makes the aircraft nose-heavy and hard to flare or rotate; a CG too far aft reduces stability and can make recovery from a stall difficult. Mechanics own W&B because installing, removing, or relocating equipment changes both numbers, and 14 CFR Part 43 requires that those changes be computed and recorded.
The datum is an imaginary reference plane (often the nose, firewall, or leading edge) from which all horizontal distances are measured. The arm (moment arm) is the horizontal distance in inches from the datum to an item; arms aft of the datum are positive, arms forward are negative . This sign convention is essential when an item sits ahead of the datum.
The Core Equations and Terms
Three relationships answer almost every W&B test item:
- Term Definition / formula
- Arm Horizontal distance (in.) from datum to the item
- Moment Weight x Arm (units: pound-inches, lb-in)
- Center of gravity (CG) Total Moment / Total Weight (in.)
- Empty weight Airframe, engines, fixed equipment, unusable fuel, full operating fluids
- Useful load Max takeoff weight minus empty weight (crew, payload, usable fuel)
- Moment index Moment reduced by a divisor (e.g., 1,000) to keep numbers small
The moment is the turning effect of a weight about the datum, and because moment = weight x arm, a small weight on a long arm can equal a large weight on a short arm. To find CG you add every item's weight, add every item's moment, then divide total moment by total weight. The moment index simply scales moments down (dividing by 100 or 1,000) so the arithmetic is manageable - remember to keep the divisor consistent.
A Fully Worked CG Calculation
Compute the loaded CG of a light aircraft (datum at the firewall):
- Item Weight (lb) Arm (in) Moment (lb-in)
- Empty aircraft 1,495.0 101.4 151,593.0
- Pilot + passenger 380.0 64.0 24,320.0
- Fuel 180.0 96.0 17,280.0
- Totals 2,055.0 - 193,193.0
Step 1 - Moments: multiply each weight by its arm (1,495 x 101.4 = 151,593, and so on). Step 2 - Totals: total weight = 2,055.0 lb; total moment = 193,193.0 lb-in. Step 3 - CG: CG = total moment / total weight = 193,193 / 2,055 = 94.0 in aft of datum .
Now compare to limits: if the approved CG range is 92.0 to 99.0 in, the 94.0-in result is within limits and the 2,055-lb total is below a 2,300-lb max gross - the loading is legal. The most common test mistake is forgetting an item's moment or dividing weight by moment instead of moment by weight. Always check that the CG falls between the forward and aft limits and that gross weight is not exceeded.
Empty-Weight CG, Adverse Loading, and Records
Empty-weight CG (EWCG) is found by weighing the aircraft per FAA-H-8083-1: level the aircraft, place calibrated scales under each wheel, subtract tare (chocks, blocks), sum the net scale weights and their moments, and divide total moment by total weight. Drain or account for fuel and oil per the procedure. The EWCG is the starting point for every later loading computation and is recorded in the aircraft W&B record.
Adverse-loading (extreme-condition) checks verify that the worst realistic loadings still stay in limits: a forward check loads everything ahead of the CG and minimizes aft items to test the forward limit, and an aft check does the reverse to test the aft limit. If an extreme but realistic load drives the CG out of range, the aircraft must be re-loaded or limited.
When a mechanic installs, removes, or relocates equipment that changes weight or balance, the regulations require computing the new empty weight and EWCG, revising the equipment list, and making the maintenance/weight-and-balance record entry . Ballast (temporary or permanent) may be added to bring CG within limits, and its weight and arm enter the calculation. A current, accurate W&B record is the legal basis for every load sheet the operator builds.
Mean Aerodynamic Chord and Common Traps
CG limits may be published in inches from the datum or as a percentage of mean aerodynamic chord (% MAC) for larger aircraft. To convert, you need the leading-edge of MAC (LEMAC) location and the MAC length: % MAC = ((CG - LEMAC) / MAC) x 100. For example, a CG 39 in aft of a LEMAC at an arm of 100 in, with a 156-in MAC, is at (39 / 156) x 100 = 25% MAC. The moment index (moment divided by 100 or 1,000) keeps loading-graph numbers small, but you must apply the same divisor everywhere.
The biggest exam traps are: dividing weight by moment instead of moment by weight; forgetting an item's moment; mishandling a forward (negative) arm ; failing to subtract tare when weighing; and reporting a CG without checking it against the forward and aft limits. A loading can be within the weight limit yet outside CG limits, or vice versa - both must pass.