Study guide
4.5 Regulations, Forms, Records, and Publications
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
4.5 Regulations, Forms, Records, and Publications
Key Takeaways Explain This Topic AI
14 CFR 43.9 covers maintenance/preventive-maintenance/alteration entries (description of work, date completed, name, signature + certificate number/kind); 43.11 covers inspection entries (type and extent, date, aircraft total time in service, airworthy-or-discrepancy statement).
A major repair or major alteration is one that, if improperly done, might appreciably affect weight, balance, structural strength, performance, powerplant operation, or flight characteristics (or is not done by accepted practices or elementary operations); it needs approved data and is recorded on FAA Form 337 in addition to the maintenance record entry.
An annual is generally due every 12 calendar months. Under 91.409(b), a 100-hour inspection applies to carrying persons other than crewmembers for hire, or flight instruction for hire in an aircraft supplied by the person giving the instruction, subject to 91.409(c) exceptions; an appropriately rated mechanic needs IA for an annual but not a 100-hour inspection.
43.13 is the performance rule (use methods/techniques acceptable to the Administrator, e.g., AC 43.13-1B); 43.7/91.407 govern approval for return to service.
An applicable Airworthiness Directive (AD) is mandatory and may be one-time or recurring; the AD's own applicability section lists the affected models, serial numbers, and any installed part numbers or modifications, confirmed against the AD and the logbooks.
Last updated: October 2026
The Part 43 Framework
Regulations, records, and forms turn mechanical work into legal maintenance. 14 CFR Part 43 governs maintenance, preventive maintenance, rebuilding, and alteration; Part 65 sets mechanic certification and privileges; Part 91 assigns the owner/operator the duty to keep the aircraft airworthy.
Part 1 defines the key terms: maintenance (inspection, overhaul, repair, preservation, and parts replacement), preventive maintenance (simple/minor operations and small standard-part replacement that a certificated pilot may perform on owner-operated aircraft, listed in Part 43 Appendix A), and major repair and major alteration (any repair or alteration that is not major is minor).
Major vs. minor is a frequent question. A major repair or major alteration is one that, if done improperly, appreciably affects weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other airworthiness qualities , or that is not done by elementary operations or by accepted practices. Major work requires approved data and, in addition to the maintenance record entry, is recorded on FAA Form 337 , executed at least in duplicate: a signed copy to the aircraft owner and a copy to the FAA Aircraft Registration Branch in Oklahoma City within 48 hours after approval for return to service (for a major repair done to an acceptable manual or specifications, a repair station may instead use the customer's work order and a maintenance release); minor work may use acceptable data .
Distinguish approved data for applicable major work from acceptable methods, techniques, and practices for other maintenance. FAA AC 43.13-1B/2B and manufacturer service information must be applicable to the task; neither is a blanket authorization to depart from the aircraft’s approved configuration.
Under Part 65 , a certificated mechanic with the appropriate rating may perform and approve for return to service the maintenance and minor alterations within the privileges of the rating, and may perform the 100-hour inspection within the privileges of the airframe or powerplant rating . An annual inspection requires the appropriate additional inspection authority, such as an Inspection Authorization (IA) for a mechanic. Recent-experience requirements still apply. Ordinary maintenance is documented under 14 CFR 43.9 ; required inspection entries follow 43.11 .
Record Entries: 43.9 vs. 43.11
The two record rules are constantly confused, so learn the split:
14 CFR 43.9 14 CFR 43.11
Applies to Maintenance, preventive maintenance, rebuilding, alteration Inspections (annual, 100-hour, progressive)
Must contain Description of work (or reference to acceptable data), date of completion, name of person who did the work Type and extent of inspection, date, aircraft total time in service
Approval line Signature, certificate number, and kind of certificate of the person approving for return to service Same, plus a statement the aircraft is airworthy OR a list of discrepancies/unairworthy items
A 43.9 maintenance entry needs the description of work performed (or a reference to data acceptable to the Administrator), the date of completion, the name of the person who did the work (if different from the approver), and the signature, certificate number, and kind of certificate of the person approving for return to service. A 43.11 inspection entry must also state the inspection type and extent, the date, and the aircraft total time in service , followed by either a statement that the aircraft was found airworthy or a list of discrepancies and unairworthy items .
Inspections and Return to Service
Annual and 100-hour inspections share the same scope (Part 43 Appendix D ), but differ in who and when:
- Annual 100-hour
- Interval Every 12 calendar months Each 100 hours time-in-service
Required when Every aircraft except those 91.409(c) exempts (special flight permit, experimental, light-sport, or provisional certificate, or a progressive or other approved inspection program) Carrying any person (other than a crewmember) for hire, or flight instruction for hire in an aircraft the instructor provides (91.409(b)); 91.409(c) exceptions apply
Who may sign For an individual mechanic, an IA (an appropriately rated repair station or the manufacturer may also perform annuals) An appropriately rated mechanic (airframe rating for the airframe, powerplant rating for the engine and propeller)
Overrun None May exceed by up to 10 hours only to reach a place of inspection; the overrun is then deducted from the next interval
Approval for return to service is governed by 43.7 (who may approve) and 91.407 (the owner may not operate until the required 43.9 or 43.11 entry has been made). 14 CFR 43.13 is the performance rule : maintenance must use methods, techniques, and practices acceptable to the Administrator (commonly the manufacturer's manual or AC 43.13-1B/2B ), with tools and equipment to ensure the work meets approved standards.
Airworthiness Directives and Publications
An Airworthiness Directive (AD) is a mandatory FAA regulation issued to correct an unsafe condition; the mechanic must determine applicability from the AD's own applicability section (the affected models and serial numbers, plus any installed part numbers or modifications), searching ADs for the aircraft, engines, propeller, and installed appliances and confirming them against the product logbooks, then the required action, the compliance time, and whether it is one-time or recurring , and may use an approved Alternative Method of Compliance (AMOC) . A Supplemental Type Certificate (STC) approves a design change with its own installation data.
Manufacturer maintenance manuals, illustrated parts catalogs, service bulletins (usually advisory unless mandated by an AD), and Airworthiness Limitations sections (which contain mandatory replacement times, inspection intervals, and procedures) all matter, but their regulatory force depends on context. Effectivity is itself a risk: a procedure or part may apply only to certain serial numbers or modification states, so the mechanic confirms applicability before using the data.
Inoperative equipment must be handled by rule, not convenience. Under Part 91, an item that is inoperative must be addressed through the aircraft's Minimum Equipment List (MEL) if one is authorized, or otherwise by determining the item is not required, then deactivating and placarding it "Inoperative" and making the maintenance record entry — an inoperative required item makes the aircraft unairworthy. Warnings, cautions, and notes in the data are procedural safety information identifying injury hazards, equipment-damage risks, and important steps, not filler.
Use this documentation checklist before returning an aircraft to service:
Identify the applicable regulation, certificate privilege, and rating.
Classify the work as maintenance, preventive maintenance, repair, or alteration.
Decide whether the repair or alteration is major or minor, and select approved vs. acceptable data accordingly.
Complete the correct record (43.9 maintenance entry or 43.11 inspection entry) with the required signature, certificate number, and kind of certificate, plus FAA Form 337 for a major repair or major alteration.
Verify AD status, TCDS/STC effectivity, MEL/placard needs, and any Airworthiness Limitation items before signing.