Study guide

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan

Key Takeaways Explain This Topic AI

The Airman Knowledge Test Report (AKTR) lists Aviation Mechanic ACS codes as diagnostic targets, not copies of the live questions you missed.

All prescribed tests must be passed within 24 months (14 CFR 65.71(a)(3)), giving you a finite window to convert weak ACS codes into oral and practical readiness.

Each ACS code maps to a knowledge, risk management, or skill element, so remediation must rebuild all three for that subject.

A failed knowledge test normally requires a 30-day wait to retest, unless a signed statement from an airman holding the certificate and rating sought, certifying additional instruction in each failed subject, permits earlier retesting.

Good remediation ends with teach-back against approved maintenance data, not memorized answer fragments.

Last updated: October 2026

The AKTR Is a Work Order for Your Study Plan

The Airman Knowledge Test Report (AKTR) is the official record you receive after each computer-based knowledge test at an FAA-approved testing center. For the Aviation Mechanic certificate there are three separate knowledge tests — General (AMG) , Airframe (AMA) , and Powerplant (AMP) — and each produces its own AKTR with a percentage score (70% is the minimum passing grade) and a list of Aviation Mechanic Airman Certification Standards (ACS) codes for the subject areas where you answered incorrectly.

The single most important fact about these codes is what they are not : they are not a transcript of the live test questions you missed, and they do not reveal which specific items tripped you up. The FAA deliberately reports them at the ACS code level so that you remediate the underlying subject area rather than memorizing a leaked question. A code such as a General electricity element tells you the topic family to rebuild — Ohm's law, series and parallel circuits, the relationship E = I × R — not the exact figures of one question.

Because the Mechanic ACS is now the governing standard (the FAA implemented it on September 21, 2022, and 14 CFR Part 65 has required its use for oral and practical testing since August 1, 2023), every code on your report ties directly to a line item the Designated Mechanic Examiner can probe later. Treating the AKTR as a structured work order — one entry per weak subject — is the most efficient path from a passing score to a confident oral and practical performance.

Decode Each Code Into Knowledge, Risk Management, and Skill

The ACS organizes every subject into three element types, and a thorough remediation plan rebuilds all three for any weak code:

Knowledge (K) elements — the facts, theory, and regulatory references (for example, what an airworthiness directive is and where compliance is recorded).

Risk management (RM) elements — the hazards and judgment calls tied to the task (for example, recognizing that a fatigued mechanic or missing data is a stop-work condition).

Skill (S) elements — the hands-on demonstration the practical projects require (for example, correctly torquing a fastener or measuring a defect).

A candidate who only re-reads a textbook chapter addresses the K element but leaves the RM and S elements untouched — and those are exactly what the practical projects evaluate.

  • AKTR step Action Output
  • 1 List every ACS code from all three AKTRs A consolidated weakness sheet
  • 2 Look up each code in the Mechanic ACS Knowledge / risk / skill elements
  • 3 Find the supporting FAA reference FAA-H-8083 handbook, regulation, or AC
  • 4 Practice a spoken teach-back Oral readiness
  • 5 Rehearse the related hands-on task Practical readiness

Do not skip a subject just because you passed the test overall. A 75% General score can still leave six or eight coded subjects unremediated, and the DME may select any of them as an oral prompt or as one of the practical projects.

Mind the Clock and the Retest Rules

Two timing rules shape your plan. First, 14 CFR 65.71(a)(3) requires all prescribed tests to be passed within a period of 24 months — you must complete the oral and practical with a DME within 24 months of your first passed knowledge test, or that knowledge test must be retaken. This makes early scheduling of the oral and practical a risk-management decision in itself.

Second, if you fail a knowledge test, you generally must wait 30 days before retesting on the same subject. That wait can be shortened only if an airman holding the certificate and rating you seek gives you additional instruction in each failed subject (the codes on your AKTR point to it) and signs a statement that you are ready; with that statement you may retest sooner (14 CFR 65.19). The ACS codes tell that airman where the additional instruction should focus.

The strongest remediation ends with teach-back against approved data : you should be able to open the relevant handbook, regulation, or manufacturer document and explain the concept in your own words, including the hazard and the maintenance action. If you can only recite a phrase, you have memorized an answer, not rebuilt the knowledge — and that gap will surface the moment the DME asks a follow-up question that the practice test never showed you.

A practical scheduling tip ties both rules together. Because the window is 24 months but a thorough oral and practical remediation of a dozen coded subjects across three ratings can take weeks, the highest-risk move is to pass all three written tests, set them aside, and let months erode both the memory and the calendar.

Instead, treat the AKTR as a live punch list: book the DME early enough that you still have margin if a project needs re-rehearsal, and rebuild the weak codes while the broader subject is still fresh from written-test preparation. Mechanics who let the knowledge cool find they are relearning entire subjects under deadline pressure — itself a human-factors hazard the ACS asks you to recognize.