Study guide

11.2 What the DME Oral Exam Is Really Testing

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

11.2 What the DME Oral Exam Is Really Testing

Key Takeaways Explain This Topic AI

The oral portion is conducted one-on-one with a Designated Mechanic Examiner (DME) and uses a planning sheet of questions that the DME must ask in full.

No reference material is allowed during the oral test, so answers must come from internalized knowledge and reasoning.

A complete oral answer names the condition, the approved data reference, the limit, the safety risk, and the maintenance action.

The General oral plus the Airframe and Powerplant orals each stand alone, and weak AKTR codes are fair oral prompts even after a passing written score.

Saying you would consult approved data is stronger than guessing beyond a privilege you cannot defend.

Last updated: June 2026

Who the DME Is and How the Oral Works

The oral and practical test is administered by a Designated Mechanic Examiner (DME) — a private individual the FAA authorizes to conduct mechanic certification tests on its behalf. There are three orals, one for each rating: General , Airframe , and Powerplant . You must pass the General before the FAA will issue either the Airframe or Powerplant rating, because General knowledge underpins both.

The DME works from a planning sheet generated for your test. The Mechanic ACS now drives that planning sheet, and FAA guidance requires that all questions on the planning sheet be asked — the DME cannot quietly drop a topic that looks hard. During the oral portion the applicant may not use reference material : no handbooks, no phones, no notes. This is deliberate. The oral is the FAA's check that you carry the working knowledge of a mechanic in your head, so that on a real job you can recognize a problem and know where to look, even before you open the manual.

That distinction — recall versus reference — explains the whole design. The practical projects (covered in 11.3) do let you research data, because real maintenance is done with the manual open. The oral is the one place where the manual is closed, so the DME can see whether you actually understand the system or were leaning on a book.

A brief history clarifies why the standard feels demanding. The mechanic test was governed for years by the Practical Test Standards (PTS) ; the FAA replaced that framework with the Mechanic ACS (implemented September 21, 2022, mandatory for oral and practical testing August 1, 2023). The ACS did more than rename the document — it restructured every subject into knowledge, risk management, and skill elements and tied the planning sheet directly to those elements.

A candidate who studied from older PTS-era material may be surprised that the DME now expects a risk-management dimension in answers and forbids combining practical projects. Studying from current ACS-aligned material is therefore part of remediation, not an afterthought.

What a Strong Oral Answer Sounds Like

The DME is not listening for a single memorized phrase; the DME is evaluating whether you can reason from approved maintenance principles . The most reliable answer structure connects five things:

Condition — what you observe (a crack, a worn tire, an out-of-limit reading).

Reference — the approved data that governs it (manufacturer maintenance manual / Instructions for Continued Airworthiness, the applicable regulation, or an Advisory Circular such as AC 43.13-1B for acceptable methods).

Limit — the specific serviceable limit or tolerance that decides acceptable versus unairworthy.

Risk — the safety consequence if the condition is ignored.

Action — the maintenance decision: repair, replace, further inspect, or ground.

Weak oral answer Strong oral answer

"That bolt looks fine." "I'd compare the bolt to the manufacturer's torque and condition limits, check for the right grip length and AN identification, and reject it if it shows thread damage or improper fit."

"You replace the part." "I'd confirm the discrepancy against the maintenance manual limit, replace the part with an approved one, then document the work and approve it for return to service under my rating."

Notice the strong answers name a reference and a limit even without quoting an exact number. The DME knows you cannot memorize every figure for every aircraft; what the DME needs to hear is that you know a limit exists , you know where it lives, and you would not sign without it.

Handling Questions You Cannot Fully Answer

Because the oral can draw on your weak AKTR codes , expect at least some questions in subjects you found hard on the written test — a passing 70% still leaves coded gaps, and the DME may revisit them. The worst response is to invent a number or claim a privilege you cannot defend. The certificate carries real authority, and the DME is testing your judgment about the limits of that authority.

The correct move when a question depends on an aircraft-specific limit you do not know from memory is to state the process : "I don't have that exact figure memorized, but I would find it in the manufacturer's maintenance manual / ICA for this aircraft and apply the published limit before deciding." That answer demonstrates exactly the behavior 14 CFR 65.81 demands — a mechanic may not exercise certificate privileges unless that person understands the current manufacturer instructions and maintenance manuals for the specific operation. Admitting you would consult approved data is not a weakness; it is the legally required habit.

Keep answers organized and concise. Ramble invites follow-ups into territory you have not rehearsed; a tight answer that names condition, reference, limit, risk, and action signals a mechanic the DME can trust to make safe calls in the field.

It also helps to know the breadth the General oral can cover, because it underpins both ratings. Typical General subjects include basic electricity (Ohm's law and series/parallel circuits), weight and balance (datum, arm, moment, and computing center of gravity as total moment divided by total weight), aircraft materials and processes (AN hardware, the common nondestructive testing methods, and corrosion types and treatment), fluid lines and fittings, ground operation and servicing, the maintenance forms and records of Part 43, and human factors.

A candidate who can move comfortably from an Ohm's-law relationship to a corrosion-treatment decision to a logbook-entry requirement demonstrates the integrated knowledge the General oral is designed to confirm before the Airframe and Powerplant orals narrow into systems specifics.