Study guide
11.5 Documentation, Maintenance Records, and Data Discipline
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
11.5 Documentation, Maintenance Records, and Data Discipline
Key Takeaways Explain This Topic AI
14 CFR 43.9 governs maintenance/alteration entries; 43.11 governs inspection entries such as the annual and 100-hour.
A 43.9 return-to-service entry needs a work description (or reference to acceptable data), the date, and the signature, certificate number, and kind of certificate of the approving person.
Performing maintenance and approving for return to service are distinct acts, and the records must show who did each.
Approved or acceptable maintenance data includes the manufacturer's ICA/maintenance manual, ADs, and AC 43.13 acceptable methods.
When the required entry or approval is uncertain, consult the applicable regulation and maintenance data before signing.
Last updated: October 2026
Paperwork Is Part of the Maintenance Action
Documentation is not clerical cleanup performed after the 'real' maintenance — it is part of the maintenance action and part of the aircraft's airworthiness. The record tells the next mechanic, inspector, owner, or pilot what was done, what data supported it, and who took responsibility for approving it. An aircraft can be physically repaired and still not be legally airworthy if the required record entry is missing or incomplete.
Two regulations dominate records questions, and the DME expects you to know the split:
14 CFR 43.9 — content, form, and disposition of records for maintenance, preventive maintenance, rebuilding, and alteration (the everyday repair and alteration entries).
14 CFR 43.11 — content, form, and disposition of records for inspections conducted under Part 91 and others, including the annual and 100-hour inspections .
A quick way to remember it: 43.9 is for work performed , 43.11 is for inspections completed . Both end in a record entry, but the required elements differ, and an inspection entry must additionally state the type and extent of the inspection and the aircraft total time in service.
Documentation also has a permanence dimension the DME may probe. Routine maintenance and 100-hour/annual inspection records are retained until the work is superseded or for one year, while certain records — total time in service, current inspection status, status of life-limited parts, and AD compliance — must be retained and transferred with the aircraft because they establish ongoing airworthiness.
A mechanic who treats the logbook as disposable scratch paper misunderstands that these entries follow the aircraft for its entire life and are relied on by every future owner and inspector. Advisory Circular AC 43-9 provides FAA guidance on acceptable maintenance record-making practices and is the document to cite when a DME asks how records should be written.
What a Compliant Entry Must Contain
Under 43.9 , a maintenance entry approving an item for return to service must contain, at minimum:
A description of the work performed (or a reference to data acceptable to the Administrator, such as a work order on file).
The date the work was completed.
The name of the person who performed the work, if different from the person approving it.
The signature, certificate number, and kind of certificate held by the person approving the aircraft, airframe, engine, propeller, appliance, or component part for return to service.
Do not skip that fourth element. Signing your name is not enough — the entry must show your certificate number and that you hold a mechanic certificate with the appropriate rating.
For inspections under 43.11 , the entry adds the type of inspection and a brief description of its extent , the date and aircraft total time in service , and a specific return-to-service statement. If the inspection found discrepancies that make the aircraft unairworthy, the person must instead make a disapproval entry and give the owner a signed and dated list of those discrepancies.
- Element 43.9 (maintenance) 43.11 (inspection)
- Description of work Yes Type and extent of inspection
- Date Yes Yes
- Aircraft total time in service Not required Yes
- Signature + certificate number + kind Yes Yes
- Disapproval/discrepancy list option N/A Yes, if unairworthy
Performing vs. Approving, and the Data Behind It
The DME frequently probes the distinction between performing maintenance and approving an aircraft or appliance for return to service , because they carry different responsibility. A mechanic might perform a task under supervision yet not personally hold the privilege to approve the result; the record must reflect who did each. This is also where the Part 65 privileges in 11.6 connect — only an appropriately rated and current mechanic may sign the return-to-service approval.
Every entry should be traceable to approved or acceptable maintenance data : the manufacturer's Instructions for Continued Airworthiness (ICA) / maintenance manual , applicable Airworthiness Directives (ADs) , Type Certificate Data Sheets, and acceptable methods such as AC 43.13-1B/2B when no manufacturer data exists. AD compliance in particular must be recorded — the owner's AD status record shows the method of compliance, the AD number and revision date, and, for a recurring AD, the time and date when the next action is required (14 CFR 91.417) — because an uncomplied AD renders the aircraft unairworthy regardless of physical condition.
When a candidate is unsure what the required entry or approval is, the correct move is the same one that governs the whole certificate: consult the applicable regulation and the maintenance data before signing . A defensible records answer in the oral names the regulation (43.9 or 43.11), lists the required elements, identifies the supporting data, and states who holds the approval authority — exactly the structure that proves you understand records as airworthiness, not bureaucracy.
Major work raises the bar further. A major repair or major alteration (defined in 14 CFR Part 1, with examples listed in Part 43, Appendix A) cannot be cleared by an ordinary logbook entry alone; it requires FAA Form 337 , Major Repair and Alteration, and the approving signature of an appropriately authorized person — commonly a mechanic holding an Inspection Authorization (IA) , or work performed and approved by a certificated repair station under its own data. Distinguish a minor repair or alteration, normally documented under 43.9 , from major work requiring the applicable approved data, records, and return-to-service authority.
Misclassifying a major alteration as minor and signing it off with a simple entry is both a paperwork failure and an airworthiness failure, because the work was never approved on the data the FAA requires.