Study guide
1.3 AMTS and Military Eligibility Pathways
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
1.3 AMTS and Military Eligibility Pathways
Key Takeaways Explain This Topic AI
Graduation from an FAA-certificated Part 147 Aviation Maintenance Technician School (AMTS) is an alternative to the 65.77 experience path.
An authenticated AMTS graduation certificate documents the experience basis and can authorize the knowledge tests it covers.
Under 14 CFR 65.80, currently enrolled AMTS students may be authorized to take knowledge tests before graduation once the school certifies the relevant coursework is complete.
Military experience can qualify through a Joint Service Aviation Maintenance Technician Certification Council (JSAMTCC) Certificate of Eligibility.
A Military Certificate of Eligibility authorizes only the specific tests it lists; it is not a blanket authorization for all three.
Last updated: June 2026
The Schooling Path: Part 147 AMTS
The FAA mechanic pathway is not limited to the experience route. 14 CFR 65.77 expressly accepts an authenticated graduation certificate or certificate of completion from a certificated Aviation Maintenance Technician School (AMTS) in lieu of the 18- or 30-month practical-experience requirement. These schools are certificated under 14 CFR Part 147 and run a structured curriculum — historically about 18 to 24 months — that builds the general, airframe, and powerplant knowledge and skills the certificate demands.
For a Part 147 graduate, the authenticated graduation document does two jobs at once: it establishes the eligibility basis (replacing documented experience) and serves as the authorization to test for the curriculum the school is certificated to teach. A school certificated for both airframe and powerplant curricula can authorize a graduate for all three tests (AMG, AMA, AMP); a school certificated for only one curriculum authorizes only the corresponding tests. The phrase 'authenticated' matters — the document must be a genuine, signed school record, not a self-made transcript.
Testing Before Graduation Under 65.80
Many AMTS students do not wait until graduation to begin testing. 14 CFR 65.80 allows a currently enrolled student at a certificated AMTS to take the knowledge tests once the school certifies, in writing, that the student has satisfactorily completed the relevant portion of the approved curriculum. This lets a student knock out the AMG test after finishing the general coursework, then the AMA and AMP tests as the airframe and powerplant phases conclude, rather than facing all three at the end.
Two limits keep this orderly:
The school's certification covers only the subjects completed — a student cannot test on powerplant material before completing the powerplant phase.
The oral and practical still require graduation (or the full experience basis) before they can be taken with a DME; 65.80 is a testing accommodation for the written tests, not a shortcut around the skill demonstration.
This staged approach is one reason AMTS students often finish their three knowledge tests well before they walk across the graduation stage.
The Military Path: JSAMTCC and the Certificate of Eligibility
Military aviation-maintenance experience can also qualify an applicant, recognized through the Joint Service Aviation Maintenance Technician Certification Council (JSAMTCC) program. A qualifying service member or veteran can obtain a Military Certificate of Eligibility (COE) that documents their military maintenance experience as equivalent to the civilian requirement for the rating(s) and test(s) it lists.
The critical rule is scope : a Military COE authorizes only the specific tests identified on it . If the COE covers the General and Airframe tests, it does not authorize the Powerplant test; the applicant would need additional documented experience or schooling to test for the missing rating. A frequent misconception is that any military maintenance background is a blanket pass for all three tests — it is not. Read the COE literally, match each listed test to your plan, and identify any gap early.
Path Eligibility document What it authorizes
Part 147 AMTS graduate Authenticated graduation/completion certificate The tests for the curriculum the school is certificated to teach
Enrolled AMTS student (65.80) School's written certification of completed coursework Knowledge tests on the completed subjects only
Military (JSAMTCC) Military Certificate of Eligibility Only the specific tests listed on the COE
Keep the Document and the Test Code Aligned
Whatever the path, one principle ties this section together: the eligibility document supports authorization , but the three tests remain three separate tests . An AMTS certificate, a 65.80 school letter, and a Military COE all answer the question 'Are you authorized to sit for this test?' — they do not merge AMG, AMA, and AMP into one scored event, and they do not replace the FAA Tracking Number or the testing-center process covered in 1.4 and 1.5.
When you arrive at the testing center, the proctor matches your authorization document to the specific test code you are about to take. If the document does not cover that code, you will be turned away. Practical checklist:
List the tests your rating goal requires (AMG always; AMA and/or AMP).
Confirm your eligibility document explicitly covers each of those codes.
Resolve any gap (more experience, more coursework, or a corrected COE) before you schedule.
Getting this alignment right early prevents the most avoidable testing-day failure: showing up authorized for the wrong test.
Choosing Between the Paths
Which path is 'best' depends on your circumstances, not on any FAA preference — all three produce the same certificate. The AMTS route front-loads cost and time (tuition and 18–24 months) but delivers structured instruction explicitly built around the ACS, which is why AMTS graduates often pass the written tests efficiently and arrive at the O&P well drilled.
The experience route suits someone already employed in aviation maintenance under appropriate supervision; it can be cheaper but demands disciplined recordkeeping and a supervisor willing to verify duties. The military route rewards service technicians whose documented military maintenance maps to the JSAMTCC criteria, but it requires confirming that the COE actually covers the rating(s) you want.
A hybrid is common and entirely legitimate: a veteran might use a Military COE for one rating and document additional civilian experience for the other; an AMTS student might combine 65.80 early testing with the school's final graduation document. The FAA cares only that the eligibility basis is valid and that the authorization matches each test code — not which route you traveled. The recurring lesson across all three paths is the same: confirm that your specific document authorizes the specific test you intend to sit, well before you schedule it.