Study guide
1.2 Baseline Eligibility and the Experience Path
FAA A&P Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes
1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition
2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow
2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control
3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics
3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight
4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors
4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment
5 Airframe I: Structures, Flight Controls, and Airframe Inspection
5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions
6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms
6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection
7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems
7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control
8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection
8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness
9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting
9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting
10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers
10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection
11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment
11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness
12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps
12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps
1.2 Baseline Eligibility and the Experience Path
Key Takeaways Explain This Topic AI
FAA mechanic applicants must be at least 18 years old (14 CFR 65.71).
Applicants must be able to read, write, speak, and understand the English language.
The experience path under 14 CFR 65.77 requires at least 18 months of practical experience for one rating, or at least 30 months performing both airframe and powerplant duties concurrently for both ratings.
Experience must be documented to the Administrator's satisfaction and be appropriate to the rating sought — random shop time does not automatically count.
Meeting a time requirement establishes eligibility, not readiness; the ACS subject areas must still be studied.
Last updated: October 2026
Eligibility Begins Before Scheduling
FAA mechanic eligibility is governed by 14 CFR 65.71 , and it must be satisfied before you treat the knowledge tests as a scheduling problem. The baseline requirements are:
Age: at least 18 years old .
Language: able to read, write, speak, and understand the English language (the one exception in 65.71(a)(2): an applicant who does not meet it and is employed outside the United States by a U.S. air carrier may have the certificate endorsed "Valid only outside the United States").
Basis to qualify: either complete an FAA-approved school under Part 147 (covered in 1.3) or document the required practical experience under 14 CFR 65.77 .
Pass the tests: the knowledge tests of 65.75 and the oral/practical of 65.79.
Age 18 and English are requirements for the certificate itself; the FAA testing matrix lists no minimum age (N/A) for the AMG, AMA, and AMP knowledge tests. The experience or schooling basis takes months to satisfy (18 or 30 months of experience, or a Part 147 curriculum), so plan it first, not last.
The 18-Month vs. 30-Month Rule
The experience path lives in 14 CFR 65.77 . Read it carefully, because the two numbers are not interchangeable:
Goal Experience required (65.77)
One rating (Airframe OR Powerplant) At least 18 months of practical experience with the procedures, practices, materials, tools, machine tools, and equipment used in constructing, maintaining, or altering airframes or powerplants, appropriate to the rating sought
Both ratings At least 30 months of practical experience concurrently performing the duties appropriate to both the airframe and powerplant ratings
The word concurrently is the trap. The 30-month figure is not '18 + 18 = 36 months' and it is not 'do airframe for a while, then powerplant for a while.' It is 30 months during which you are performing airframe AND powerplant work in the same period. A common exam-style distractor presents '36 months' or 'two separate 18-month blocks' as the both-ratings answer; both are wrong. The single-rating figure is 18 months ; the concurrent both-ratings figure is 30 months .
Documenting Experience to the Administrator's Satisfaction
The regulation requires experience that is documentary evidence satisfactory to the Administrator . In practice that means a Flight Standards District Office ( FSDO ) Aviation Safety Inspector reviews your evidence and signs the Form 8610-2 authorizing you to test. Acceptable documentation typically includes:
A logbook or detailed work record showing dates, the type of work performed, and the aircraft or component worked on.
Employer letters on company letterhead describing your duties, the period of employment, and the percentage of time on airframe vs. powerplant tasks.
Supervisor verification from a certificated mechanic or repair station.
The experience must be appropriate to the rating sought . Time spent only fueling aircraft, sweeping the hangar, or doing pure parts-counter work does not establish airframe or powerplant practical experience. The inspector is judging both the duration and the relevance of the work. Candidates frequently underestimate how rigorously the FSDO scrutinizes records — keep contemporaneous logs rather than reconstructing them from memory years later.
Note that 14 CFR 65.77 counts practical experience, not calendar elapsed time: 18 months of full-time line work establishes a rating, but the same 18 months of occasional part-time tasks may not, because the inspector evaluates the actual hands-on duties performed. For the both-ratings route, the 30 months must be concurrent — your records must show airframe and powerplant work occurring in the same periods, which is why detailed task-level logs (date, aircraft, system, and procedure) carry far more weight than a generic employment-dates letter.
Eligibility Is Not Readiness
A final, exam-relevant distinction: meeting the 18- or 30-month requirement makes you eligible to test, but it does not make you ready to pass. The knowledge tests are built on the Aviation Mechanic ACS , and its subject areas (electricity, weight & balance, materials, regulations, systems, engines; the FAA companion guide FAA-G-ACS-1 gives each subject 5–10% or 5–15% of its test) demand deliberate study even for experienced technicians, because field experience is often narrow. A mechanic who has spent two years exclusively on sheet-metal repair may still be weak on the regulatory, electrical, or powerplant subjects the tests cover.
Think of eligibility and readiness as two separate checkboxes: eligibility is a regulatory threshold verified by an inspector; readiness is a content threshold you verify by working the ACS subject areas until you can clear 70% on each test. This chapter's later sections (1.4–1.6) handle the mechanics of getting authorized and tested once both boxes are checked.
English Proficiency in Practice
The English-language requirement deserves a closer look because it is frequently underestimated. The regulation requires the ability to read, write, speak, and understand English — all four skills, not just conversational fluency. This is a safety requirement: maintenance manuals, Airworthiness Directives, service bulletins, and logbook entries are written in English, and a mechanic must read technical data precisely and record work clearly.
The one exception in 14 CFR 65.71(a)(2) covers an applicant employed outside the United States by a U.S. air carrier: that certificate is endorsed 'Valid only outside the United States.' There is no general waiver simply because English is a second language. Candidates whose technical English is weak should treat manual-reading practice as part of their preparation.
Mapping Your Own Path
Before moving on, map your situation against the gates: Are you 18 or older? Can you handle technical English in all four skills? Do you have a clear basis — documented experience (1.2) or schooling/military credit (1.3)? If any answer is 'not yet,' that gap is your first task. Eligibility cannot be rushed, but it can be planned, and the candidates who finish fastest are usually the ones who nailed down their experience documentation early rather than discovering a shortfall at the FSDO when they tried to schedule their tests.