Study guide

8.2 Horizontally Opposed and Radial Engine Components

FAA A&P Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Eligibility, FTN, Authorization, Three-Test Path, and Retakes

1.1 Certificate Ratings and the Three-Test Roadmap 1.2 Baseline Eligibility and the Experience Path 1.3 AMTS and Military Eligibility Pathways 1.4 FTN, IACRA, and the Authorization File 1.5 Knowledge-Test Logistics and Scoring 1.6 AKTRs, Retakes, and the DME Transition

2 ACS Map, Testing Matrix, Embedded Images, Supplements, and Study Workflow

2.1 Testing Matrix Facts for AMG, AMA, and AMP 2.2 ACS Map and Subject-Area Boundaries 2.3 AKTR ACS-Code Diagnostics 2.4 Testing Supplement and Embedded Images 2.5 Three-Test Study Workflow 2.6 Final Review and Test-Day Source Control

3 General I: Electricity, Drawings, Weight and Balance, Math, and Physics

3.1 Electricity and Electronics Foundations 3.2 AC/DC Measurement and Schematic Troubleshooting 3.3 Aircraft Drawings, Blueprints, and Schematics 3.4 Weight and Balance Equations and Records 3.5 Maintenance Math and Unit Discipline 3.6 Physics for Aviation: Forces, Fluids, and Flight

4 General II: Lines, Materials, Servicing, Corrosion, Records, Inspection, and Human Factors

4.1 Fluid Lines, Fittings, and Installation Risk 4.2 Materials, Hardware, and Process Control 4.3 Ground Operations, Servicing, and Ramp Safety 4.4 Cleaning, Corrosion Control, and Finishing 4.5 Regulations, Forms, Records, and Publications 4.6 Inspection Concepts, Human Factors, and Maintenance Judgment

5 Airframe I: Structures, Flight Controls, and Airframe Inspection

5.1 Metallic Structure Inspection and Damage Patterns 5.2 Sheet-Metal Repairs, Fasteners, and Riveting Judgment 5.3 Non-Metallic Structures: Composites, Wood, Fabric, and Plastics 5.4 Flight Control Systems, Rigging, and Travel 5.5 Control Surface Balance, Flutter, and Freeplay 5.6 Airframe Inspection, Records, ADs, and Corrosion Decisions

6 Airframe II: Landing Gear, Hydraulics, Pneumatics, Environmental, Instruments, and Comms

6.1 Landing Gear, Wheels, Tires, and Brakes 6.2 Retraction, Steering, Anti-Skid, and Warning Systems 6.3 Hydraulic Systems: Components, Fluids, and Troubleshooting 6.4 Pneumatic, Vacuum, and Bleed-Air Systems 6.5 Environmental Systems: Pressurization, Heating, Cooling, and Oxygen 6.6 Instrument Systems: Pitot-Static, Gyros, and Displays 6.7 Communication, Navigation, Antennas, and Avionics Inspection

7 Airframe III: Fuel, Electrical, Ice/Rain, Fire, Rotorcraft, and Water/Waste Systems

7.1 Airframe Fuel System Boundaries and Safe Servicing 7.2 Airframe Electrical Power, Wiring, and Protection 7.3 Ice and Rain Control System Inspection and Limits 7.4 Airframe Fire Protection Detection, Extinguishing, and Squib Safety 7.5 Rotorcraft Fundamentals, Controls, Drives, and Vibration 7.6 Water and Waste Systems Service Boundaries and Contamination Control

8 Powerplant I: Reciprocating, Turbine Engine Theory, and Engine Inspection

8.1 Reciprocating Engine Cycles, Components, and Operating Boundaries 8.2 Horizontally Opposed and Radial Engine Components 8.3 Reciprocating Engine Performance, Ground Operation, and Preservation 8.4 Turbine Engine Airflow, Sections, and Performance 8.5 Turbine Engine Maintenance, FOD, Bleed Air, and Post-Installation Checks 8.6 Engine Inspection, Records, Compression, Borescope, and Airworthiness

9 Powerplant II: Instruments, Fire, Electrical, Lubrication, Ignition, and Starting

9.1 Engine Instrument Scan and Trend Logic 9.2 Pressure, Temperature, and Flow Indications 9.3 Engine Fire Protection, Detection, and Extinguishing 9.4 Engine Electrical Generation and Protection 9.5 Lubrication System Flow, Pressure, and Contamination 9.6 Ignition and Starting Troubleshooting

10 Powerplant III: Fuel Metering, Induction, Cooling, Turbine Air, Exhaust, Reversers, and Propellers

10.1 Engine Fuel System Flow, Contamination, and Vapor 10.2 Carburetors, Fuel Injection, and Metering Logic 10.3 Reciprocating Induction, Turbocharging, and Cooling 10.4 Turbine Air Systems, Bleed Air, and Anti-Ice 10.5 Exhaust Systems, Thrust Reversers, and Temperature Patterns 10.6 Propeller Systems, Governors, and Inspection

11 Oral/Practical Bridge: AKTR ACS Codes, DME Expectations, and Maintenance Judgment

11.1 Turn AKTR ACS Codes Into an Oral and Practical Remediation Plan 11.2 What the DME Oral Exam Is Really Testing 11.3 Practical Projects, Tools, Equipment, and Safety Discipline 11.4 Risk Management and Human Factors in the DME Environment 11.5 Documentation, Maintenance Records, and Data Discipline 11.6 Return-to-Service Judgment and Final DME Readiness

12 Final Review: Test Day Strategy, Three-Test Schedule, and Next Steps

12.1 Build the Final Study Calendar Around AMG, AMA, and AMP 12.2 PSI Test-Day Checklist Without Guesswork 12.3 Pacing for the 60-Question and 100-Question Knowledge Tests 12.4 Formula, Supplement, and Embedded-Image Final Review 12.5 Retake Decision Tree After a Failed or Weak Knowledge Test 12.6 DME Scheduling and Post-Pass Next Steps

8.2 Horizontally Opposed and Radial Engine Components

Key Takeaways Explain This Topic AI

Cylinder arrangements include horizontally opposed, radial, inline, and V-type; opposed engines dominate general aviation, radials use master-and-articulating rods.

Firing order is fixed by design: four-cylinder opposed engines fire 1-3-2-4 or 1-4-2-3 depending on the model (the Lycoming O-320 and Continental O-200 use 1-3-2-4); a single-row radial fires odd-numbered cylinders first then even.

Cylinder, crankshaft, bearing, piston, and valve airworthiness is decided by approved limits and measurement, not by appearance or the fact that the engine still runs.

Hydraulic lock from oil pooling in lower radial cylinders must be cleared per procedure before rotation to avoid bending a connecting rod.

Last updated: October 2026

Cylinder Arrangements and Firing Order

Cylinder layout is a common identification topic. The main arrangements are:

Horizontally opposed (flat): cylinders lie in two banks across the crankcase. Compact, light, easily streamlined, and air-cooled; the standard for modern general aviation (Lycoming, Continental).

Radial: cylinders are spaced evenly around the crankcase in one or more rows; always an odd number per row (5, 7, 9...) for even firing. Great power-to-weight, large frontal area; common on warbirds and round-engine classics.

Inline: cylinders in a single row; small frontal area but harder to cool the rear cylinders. Rare today.

V-type: two banks set in a V; high power for its size, used historically (e.g., Allison, Merlin).

Firing order is fixed by crankshaft and cam design and spaces power impulses evenly to reduce vibration. Know the common opposed orders: four-cylinder engines fire 1-3-2-4 or 1-4-2-3 depending on the model (FAA-H-8083-32B; the Lycoming O-320 and the Continental O-200 both list 1-3-2-4); a six-cylinder Continental fires 1-6-3-2-5-4 and a six-cylinder Lycoming fires 1-4-5-2-3-6 (the order FAA-H-8083-32B gives; the two makers number cylinders differently). A single-row radial fires all odd-numbered cylinders in sequence and then the even-numbered ones (e.g., a nine-cylinder fires 1-3-5-7-9-2-4-6-8). Top dead center is the reference position used for timing, valve work, and cylinder installation — locate it with the proper cylinder and method, never by eyeballing prop position.

Radial Rod Geometry and Component Inspection

Radial engines use a master rod that rides the crankpin, with articulating rods (link rods) pinned to the master rod flange to drive the other pistons. This geometry produces slightly different piston travel per cylinder and changes inspection concerns. Because oil can drain into the lower cylinders of a shut-down radial, hydraulic lock is a real hazard: rotating the engine on a locked cylinder can bend a rod or blow a cylinder. Always clear suspect cylinders per the engine procedure before turning the prop or starting.

A cylinder assembly includes the barrel, head, cooling fins, intake and exhaust valves, guides, springs, rocker arms, piston, rings, and wrist pin. A cylinder that still makes power can be unairworthy if limits are exceeded. Connect each name to a consequence and an inspection emphasis:

Component Function Inspection emphasis

Crankcase Supports crankshaft, cylinders, accessory drives Cracks, fretting, corrosion, thread/bearing-bore condition

Crankshaft Converts reciprocating motion to rotation Journals, flange, gear teeth, cracks, runout, AD/SB status

Connecting rod Transfers piston force; master/link on radials Bearing condition, bolt torque, alignment, bushing wear

Piston and rings Transmit combustion force and seal the cylinder Scoring, ring lands, pin fit, carbon, overheat signs

  • Bearings Support rotating/oscillating loads Wear, scoring, overlay loss, oil starvation, debris
  • Valves and guides Control intake/exhaust flow Burning, stem stretch, margin, seating, guide clearance
  • Cylinder Work and Decision Discipline

Cylinder replacement on an opposed engine is procedural: check surfaces, install piston and pin, orient ring gaps, fit base seals, follow the torque sequence, lubricate, set the valve train and pushrods, reinstall baffles, and run post-maintenance checks. An exam answer that skips torque sequence or approved limits is weak.

When studying components, always tie name to symptom: a worn bearing lowers oil pressure or makes metal; a burned exhaust valve drops compression with exhaust leakage; a cracked crankcase leaks oil or loses structural support; a broken cooling fin may or may not exceed limits depending on its location and the manufacturer's rejection criteria. The mechanic inspects, measures, compares to approved data, and decides — habit and appearance are never the basis for an airworthiness call.

Material Selection and Why Components Are Built the Way They Are

Understanding component construction helps you answer "why" questions on the test. Crankshafts are forged alloy steel, nitrided on the journals for hardness, and counterweighted (often with dynamic dampers — pendulum-type weights that absorb torsional vibration at the firing frequency). Connecting rods are forged or machined alloy steel with a precision split big-end carrying a steel-backed insert bearing.

Pistons are typically forged or cast aluminum alloy for light weight and good heat conduction; they carry compression rings (sealing combustion) and an oil control ring (metering oil on the cylinder wall). The wrist pin is usually a full-floating design retained by aluminum plugs or circlips so it can rotate in both the piston and the rod bushing.

Cylinder barrels are steel (sometimes nitrided or chrome-plated), while heads are aluminum alloy cast onto or screwed and shrunk onto the barrel for light weight and rapid heat rejection through the cooling fins.

Valves earn special attention: the exhaust valve runs far hotter than the intake and is often sodium-filled in the hollow stem. The sodium melts in operation and sloshes, carrying heat from the hot valve head up the stem to the guide, lowering valve-head temperature and resisting burning. Intake valves run cooler because incoming charge cools them, so they are usually solid. Knowing material and cooling logic lets you reason about failure modes — a burned exhaust valve, a stuck valve from carbon ("morning sickness"), or a cracked head from thermal shock after a rapid power reduction.

Finally, the camshaft and valve train differ by layout. Opposed engines use a single block-mounted camshaft with hydraulic or solid lifters, pushrods, and rocker arms; radials use a slow-turning cam ring (a single ring with lobes that operates all cylinders in a row) rather than a conventional camshaft. Correct valve clearance (lash) matters: too much clearance shortens valve-open duration and causes noise and poor breathing, while too little can hold a hot exhaust valve off its seat and burn it.

Hydraulic lifters automatically maintain zero lash, but solid lifters require periodic adjustment to the manufacturer's cold or hot clearance. These construction differences are exactly why inspection access and emphasis shift between the two families even though the combustion cycle is identical.