Study guide
4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking
FAA Inspection Authorization IAR
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: 14 CFR Part 65 Subpart D — Inspection Authorization
1.1 IA Eligibility, Experience & Application Requirements 1.2 IA Privileges, Limitations & Operational Authority 1.3 Duration, Validity & Biennial Renewal Requirements
2 Chapter 2: 14 CFR Part 43 — Maintenance, Alterations & Performance Standards
2.1 Scope of Part 43 & Authorized Maintenance Personnel 2.2 Major vs. Minor Repairs, Alterations & Preventive Maintenance 2.3 Performance Rules & Standards of Workmanship (14 CFR 43.13)
3 Chapter 3: Determining Airworthiness & Inspection Procedures
3.1 The Two-Part Airworthiness Standard & IA Determination 3.2 Conducting Annual & 100-Hour Inspections (14 CFR 43.15 & Appendix D) 3.3 Progressive Inspections & Disapproval Procedures (14 CFR 43.11 & 91.409)
4 Chapter 4: Airworthiness Directives, Service Bulletins, TCDS & STCs
4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking 4.2 Type Certificate Data Sheets & Aircraft Specifications 4.3 Manufacturer Service Information & Supplemental Type Certificates
5 Chapter 5: Major Repairs, Alterations, FAA Form 337 & Form 8130-3
5.1 Approved Data vs. Acceptable Data: Legal Standards & Sources 5.2 FAA Form 337: Preparation, Execution & Distribution 5.3 FAA Field Approvals, DER Data & Form 8130-3 Traceability
6 Chapter 6: Weight and Balance Calculations & Adverse Loading Checks
6.1 Weight & Balance Fundamentals, Scale Weighing & EWCG 6.2 Forward and Aft Adverse-Condition Loading Checks 6.3 Ballast Calculations, Equipment Changes & Percent MAC
7 Chapter 7: Technical Publications, Data Precedence & Inoperative Equipment
7.1 Publication Hierarchy, Technical Data Precedence & ICAs 7.2 MMEL vs. Operator MEL: Relief, Operations & Deferral Procedures 7.3 Operating with Inoperative Equipment Without an MEL (14 CFR 91.213(d))
8 Chapter 8: Maintenance Records, Retention, Transfer & Return to Service
8.1 Maintenance Record Entries & Return-to-Service Standards (14 CFR 43.5, 43.7, 43.9) 8.2 Inspection Record Entries & Certification Statements (14 CFR 43.11) 8.3 Record Retention, Aircraft Transfer & Rebuilt Engine Records (14 CFR 91.417, 91.419, 91.421)
9 Chapter 9: Structural Repairs, Sheet Metal Layout & Welded Steel Structure (AC 43.13-1B)
9.1 Sheet Metal Layout: Bend Radius, Setback, Bend Allowance & Sight Lines 9.2 Riveted Repair Design: Rivet Alloys, Substitution, Edge Distance & Spacing 9.3 Welded Steel Tubular Structure: Splices, Sleeves & Engine Mount Repairs
10 Chapter 10: Aircraft Hardware, Control Cables, Fluid Lines & Electrical Standards
10.1 Aircraft Hardware, Control Cables, Turnbuckles & Safetying Methods 10.2 Fluid Lines, Flexible Hose & Minimum Bend Radius Standards 10.3 Electrical Wire Sizing, Conductor Temperature & Load Analysis
11 Chapter 11: Alteration Design Substantiation, Corrosion Control & Powerplant Standards
11.1 Alteration Design Fundamentals: Limit vs. Ultimate Loads & Static Proof Testing 11.2 Corrosion Recognition, Control & Damage Limits 11.3 Powerplant, Propeller & Nondestructive Inspection Standards for the IA
12 Chapter 12: Part 21 Product Certification, Parts Eligibility & Reading Type Data
12.1 Part 21 Certification Framework: TC, PC, PMA, TSO & Owner-Produced Parts 12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes 12.3 Airworthiness Certificates, Required Documents, Marking & Registration
4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking
Key Takeaways Explain This Topic AI
Under 49 U.S.C. § 44701 and 14 CFR Part 39, Airworthiness Directives (ADs) are legally binding federal regulations issued when an unsafe condition exists in a product and is likely to exist or develop in other products of the same type design.
14 CFR § 39.7 states the legal effect of noncompliance directly: anyone who operates a product that does not meet the requirements of an applicable airworthiness directive is in violation of that section.
ADs follow a bi-weekly publication schedule and a standardized numbering format (e.g., 2026-12-05 indicates the year 2026, 12th bi-weekly period, and 5th sequentially issued AD in that period).
Under 14 CFR § 91.417(a)(2)(v), AD records must show the current status of applicable ADs and safety directives, including for each the method of compliance, the AD or safety directive number and revision date, and, if the action is recurring, the time and date when the next action is required.
Under 14 CFR § 39.19 an AMOC proposal is sent to the applicant's principal inspector, who forwards it to the manager of the office identified in the AD; only that manager's approval permits use of the alternative method or adjusted compliance time.
Last updated: October 2026
4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking
Note
Legal Nature of Airworthiness Directives : An Airworthiness Directive (AD) is a legally binding Federal regulation promulgated under 14 CFR Part 39 pursuant to 49 U.S.C. § 44701 . Operating an aircraft without complying with an applicable AD violates federal law. An Inspection Authorization (IA) holder cannot approve an aircraft for return to service if any applicable AD is unresolved.
Statutory Authority and Triggering Conditions: 14 CFR Part 39
Under 49 U.S.C. § 44701 , Congress empowers the FAA Administrator to promote civil aviation safety by prescribing minimum standards. The regulatory vehicle used to mandate corrective actions for safety defects in aeronautical products is 14 CFR Part 39 .
The Two Conditions Triggering an AD (§ 39.5)
Under 14 CFR § 39.5 , the FAA issues an AD only when the Administrator determines that two legal conditions exist simultaneously:
An unsafe condition exists in a product : A design defect, structural fatigue, or operational vulnerability threatens an aircraft, aircraft engine, propeller, or appliance; and
The condition is likely to exist or develop in other products of the same type design : Because products share standardized type designs under Type Certificates (TCs), a failure on one unit signals systemic fleet risk.
The Legal Effect of Noncompliance: 14 CFR § 39.7
Section 39.7 is headed "What is the legal effect of failing to comply with an airworthiness directive?" and answers it in one sentence: anyone who operates a product that does not meet the requirements of an applicable airworthiness directive is in violation of this section. Section 39.3 supplies the companion premise — FAA airworthiness directives are legally enforceable rules that apply to aircraft, aircraft engines, propellers, and appliances. Primary compliance responsibility rests on the owner/operator under 14 CFR § 91.403(a) . However, under 14 CFR § 43.11 , the IA must verify full AD compliance before signing an annual inspection return-to-service endorsement.
Promulgation Pathways and AD Classifications
Airworthiness Directives are federal rules governed by the Administrative Procedure Act (APA) (5 U.S.C. § 551 et seq.) across three primary pathways:
AD Classification Rulemaking Pathway Effective Date Public Comment Window Operational Trigger
Standard AD Notice of Proposed Rulemaking (NPRM) 30–60 days post-final rule 30–60 days prior to adoption Progressive fatigue, wear trends, or design updates
Final Rule; Request for Comments Immediate Final Rule (good cause) Upon publication in Federal Register Post-promulgation comments Critical safety risk requiring prompt fleet correction
Emergency AD Direct issuance to registered owners Immediately upon actual notice Post-promulgation Federal Register Imminent safety-of-flight hazard requiring grounding
When an urgent hazard threatens flight safety (e.g., flight control disconnect or rotor separation), the FAA issues an Emergency AD directly to registered owners via priority transmission. An Emergency AD is legally binding immediately upon receipt.
Publishing Schedule and Numbering Convention
The FAA distributes newly adopted ADs on a bi-weekly schedule through the Dynamic Regulatory System (DRS) .
AD Numbering Structure
ADs follow a standardized three-part numbering convention:
Year (e.g., 2026) : Four-digit calendar year of issuance.
Bi-Weekly Period (e.g., 12) : Two-week publication period (01 to 26).
Sequential Number (e.g., 05) : Sequential order of issuance within that period.
Revision Suffix (e.g., R1) : Indicates an amended AD without revoking its original mandate. Example : AD 2026-12-05 R1 denotes the 5th AD issued in the 12th bi-weekly period of 2026, Revision 1.
Determining Applicability Across Aeronautical Products
Under 14 CFR § 39.3 , an AD applies to "products," defined as aircraft (airframes), aircraft engines, propellers, and appliances . An IA must audit all four domains:
Airframe, Engine & Propeller ADs : Cross-referenced against make, model, and serial number blocks on product data plates.
Appliance ADs : Applied to specific installed equipment (e.g., Bendix magnetos, Marvel-Schebler carburetors, fuel pumps, seatbelts, or avionics), regardless of airframe model.
Serial Number vs. Modification Status : If an aircraft serial number is excluded, the AD does not apply. However, if an AD targets an aftermarket modification (e.g., an STC oil filter adapter), the IA must check modification records rather than airframe serial numbers.
One-Time vs. Recurring Airworthiness Directives
One-Time ADs : Require a single inspection, modification, or part replacement that permanently terminates the unsafe condition. Once complied with, no further tracking is needed.
Recurring ADs : Address ongoing fatigue or wear (e.g., repetitive spar checks or lubrication). Repetitive intervals are tracked by:
Flight Hours (Time in Service) : E.g., every 100 or 500 hours.
Calendar Months : E.g., every 12 calendar months.
Operating Cycles : E.g., landings or cabin pressurization cycles.
- Combination Intervals : E.g., "every 100 hours or 12 calendar months, whichever occurs first."
- 14 CFR § 91.417(a)(2)(v) Mandatory Recordkeeping Requirements
Separate what the rule requires from what accepted practice adds — the exam rewards knowing the regulatory minimum. 14 CFR § 91.417(a)(2)(v) requires records showing the current status of applicable airworthiness directives and safety directives , and for each one specifies three things: the method of compliance , the AD or safety directive number and revision date , and, if the AD or safety directive involves recurring action, the time and date when the next action is required . A blanket "all ADs complied with" satisfies none of these.
- Record Element Source of the Requirement Compliant Entry Example
- AD number and revision date Required by 91.417(a)(2)(v) AD 2024-14-03 R1
Method of compliance Required by 91.417(a)(2)(v) Eddy-current inspected spar caps per paragraph (g)(2); no cracks found
Next due time and date (recurring ADs only) Required by 91.417(a)(2)(v) Repetitive inspection due at 2,345.2 hours TT or September 2027
Subject / amendment number Accepted practice (AC 43-9, Maintenance Records) Wing Forward Spar Inspection, Amdt 39-22401
Date and time in service at compliance Accepted practice; the date also flows from § 43.9(a)(2) for the underlying work September 7, 2026 at 1,845.2 hours total time
Signature, certificate number, kind of certificate Required by § 43.9(a)(4) for the maintenance entry recording the work A&P 3847291 IA [Signature]
The practical consequence for an IA reviewing records at an annual: a one-time AD needs its number, revision date, and method of compliance; a recurring AD additionally needs the next-due time and date, and an entry that omits the next-due data for a recurring AD is incomplete on its face.
- AMOCs and Special Flight Permits
- Alternative Methods of Compliance (AMOC): 14 CFR § 39.19
Section 39.19 answers "May I address the unsafe condition in a way other than that set out in the airworthiness directive?" — and the answer is a qualified yes. Learn the procedure, because the exam tests both the route and the approving official:
Anyone may propose an alternative method of compliance or a change in the compliance time , provided the proposal gives an acceptable level of safety.
Unless the FAA authorizes otherwise, the proposal is sent to your principal inspector. The principal inspector may add comments and forwards it onward.
The proposal goes to the manager of the office identified in the AD — in practice an Aircraft Certification Service office, and the AD text names it.
You may use the alternative method or adjusted compliance time only if that manager approves it.
IA legal limit : an IA has no authority to approve an AMOC, to grant an interval extension, or to substitute a part not authorized by the AD. Neither does the principal inspector acting alone — the inspector is the conduit, and the office manager named in the AD is the approving official.
Special Flight Permits: 14 CFR § 39.23
Under 14 CFR § 39.23 , an aircraft that has not complied with an AD may obtain a Special Flight Permit (ferry permit) under 14 CFR § 21.197 to fly to a maintenance base, provided the AD does not explicitly prohibit ferry flights . If the AD states "Special flight permits are prohibited," no flight may occur.
Common Exam Traps & IA Watchpoints
Warning
High-Yield Exam Traps for Section 4.1 :
Trap: Blank Check AD Entries : Logging "All ADs checked" fails § 91.417(a)(2)(v); every AD must be listed individually with MOC and next due date.
Trap: FSDO AMOC Approval : The principal inspector receives and forwards the AMOC proposal but does not approve it; approval rests with the manager of the office identified in the AD.
Trap: Neglecting Appliance ADs : Appliance ADs (magnetos, carburetors, oil filters) must be checked independently of airframe records.
Trap: Ferry Permits When Prohibited : An IA cannot assume a ferry permit is available; the AD text must be reviewed for flight permit restrictions.