Study guide
4.3 Manufacturer Service Information & Supplemental Type Certificates
FAA Inspection Authorization IAR
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: 14 CFR Part 65 Subpart D — Inspection Authorization
1.1 IA Eligibility, Experience & Application Requirements 1.2 IA Privileges, Limitations & Operational Authority 1.3 Duration, Validity & Biennial Renewal Requirements
2 Chapter 2: 14 CFR Part 43 — Maintenance, Alterations & Performance Standards
2.1 Scope of Part 43 & Authorized Maintenance Personnel 2.2 Major vs. Minor Repairs, Alterations & Preventive Maintenance 2.3 Performance Rules & Standards of Workmanship (14 CFR 43.13)
3 Chapter 3: Determining Airworthiness & Inspection Procedures
3.1 The Two-Part Airworthiness Standard & IA Determination 3.2 Conducting Annual & 100-Hour Inspections (14 CFR 43.15 & Appendix D) 3.3 Progressive Inspections & Disapproval Procedures (14 CFR 43.11 & 91.409)
4 Chapter 4: Airworthiness Directives, Service Bulletins, TCDS & STCs
4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking 4.2 Type Certificate Data Sheets & Aircraft Specifications 4.3 Manufacturer Service Information & Supplemental Type Certificates
5 Chapter 5: Major Repairs, Alterations, FAA Form 337 & Form 8130-3
5.1 Approved Data vs. Acceptable Data: Legal Standards & Sources 5.2 FAA Form 337: Preparation, Execution & Distribution 5.3 FAA Field Approvals, DER Data & Form 8130-3 Traceability
6 Chapter 6: Weight and Balance Calculations & Adverse Loading Checks
6.1 Weight & Balance Fundamentals, Scale Weighing & EWCG 6.2 Forward and Aft Adverse-Condition Loading Checks 6.3 Ballast Calculations, Equipment Changes & Percent MAC
7 Chapter 7: Technical Publications, Data Precedence & Inoperative Equipment
7.1 Publication Hierarchy, Technical Data Precedence & ICAs 7.2 MMEL vs. Operator MEL: Relief, Operations & Deferral Procedures 7.3 Operating with Inoperative Equipment Without an MEL (14 CFR 91.213(d))
8 Chapter 8: Maintenance Records, Retention, Transfer & Return to Service
8.1 Maintenance Record Entries & Return-to-Service Standards (14 CFR 43.5, 43.7, 43.9) 8.2 Inspection Record Entries & Certification Statements (14 CFR 43.11) 8.3 Record Retention, Aircraft Transfer & Rebuilt Engine Records (14 CFR 91.417, 91.419, 91.421)
9 Chapter 9: Structural Repairs, Sheet Metal Layout & Welded Steel Structure (AC 43.13-1B)
9.1 Sheet Metal Layout: Bend Radius, Setback, Bend Allowance & Sight Lines 9.2 Riveted Repair Design: Rivet Alloys, Substitution, Edge Distance & Spacing 9.3 Welded Steel Tubular Structure: Splices, Sleeves & Engine Mount Repairs
10 Chapter 10: Aircraft Hardware, Control Cables, Fluid Lines & Electrical Standards
10.1 Aircraft Hardware, Control Cables, Turnbuckles & Safetying Methods 10.2 Fluid Lines, Flexible Hose & Minimum Bend Radius Standards 10.3 Electrical Wire Sizing, Conductor Temperature & Load Analysis
11 Chapter 11: Alteration Design Substantiation, Corrosion Control & Powerplant Standards
11.1 Alteration Design Fundamentals: Limit vs. Ultimate Loads & Static Proof Testing 11.2 Corrosion Recognition, Control & Damage Limits 11.3 Powerplant, Propeller & Nondestructive Inspection Standards for the IA
12 Chapter 12: Part 21 Product Certification, Parts Eligibility & Reading Type Data
12.1 Part 21 Certification Framework: TC, PC, PMA, TSO & Owner-Produced Parts 12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes 12.3 Airworthiness Certificates, Required Documents, Marking & Registration
4.3 Manufacturer Service Information & Supplemental Type Certificates
Key Takeaways Explain This Topic AI
Manufacturer Service Bulletins (SBs), Service Letters, and Service Instructions are advisory recommendations and are not legally mandatory for Part 91 general aviation operators, regardless of manufacturer wording such as "Mandatory" or "Critical."
Manufacturer Service Bulletins acquire mandatory legal authority under Part 91 only under three specific conditions: (1) explicit incorporation by reference in an FAA Airworthiness Directive, (2) adoption into an FAA-approved CAMP under Part 121/135, or (3) incorporation into the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness.
Supplemental Type Certificates (STCs) issued under 14 CFR Part 21 Subpart E govern major changes in type design; an IA must verify aircraft eligibility on the STC Approved Model List (AML) and verify written permission from the STC holder under 14 CFR § 91.403(d).
The installer and the IA approving an STC alteration bear joint legal responsibility for evaluating multi-STC compatibility; installing mutually incompatible STCs invalidates type design conformity and renders the aircraft unairworthy.
STC alterations must be documented on an FAA Form 337 referencing approved technical data, accompanied by an Airplane Flight Manual Supplement (AFMS) in the cockpit, updated weight and balance data, and Instructions for Continued Airworthiness (ICA).
Last updated: September 2026
4.3 Manufacturer Service Information & Supplemental Type Certificates
Note
Regulatory Mandates vs. Manufacturer Guidance : Under Federal aviation law, private manufacturers have no statutory authority to issue Federal regulations. Under 14 CFR Part 91 , manufacturer service documents are advisory unless elevated into law through formal regulatory mechanisms. An Inspection Authorization (IA) holder must understand the precise boundary between manufacturer recommendations and FAA-approved technical data.
Manufacturer Service Information: Types and Regulatory Standing
Aeronautical manufacturers publish various documents to assist mechanics and operators:
Service Bulletins (SBs) : Technical notices detailing design modifications, potential defect inspections, or product enhancements.
Alert Service Bulletins (ASBs) : High-priority SBs addressing urgent flight safety concerns.
Service Letters (SLs) & Service Instructions (SIs) : Informational bulletins providing servicing tips, maintenance techniques, or vendor part substitutions.
The Fundamental Part 91 Rule: SBs Are Non-Mandatory
Manufacturers frequently title their bulletins with aggressive headings such as "MANDATORY SERVICE BULLETIN," "CRITICAL SAFETY DIRECTIVE," or "COMPLIANCE REQUIRED WITHIN 10 FLIGHT HOURS."
Under 49 U.S.C. § 44701 , Congress granted regulatory authority exclusively to the FAA Administrator. A private manufacturer cannot enact federal law. Therefore, for general aviation aircraft operated under 14 CFR Part 91 , compliance with manufacturer Service Bulletins is voluntary and advisory . An IA cannot ground an aircraft, find it unairworthy, or issue a discrepancy list under 14 CFR § 43.11 solely because an owner declined to comply with an advisory Service Bulletin.
The Three Exceptions Where Service Bulletins Become Legally Mandatory
There are three specific legal exceptions where a manufacturer Service Bulletin acquires compulsory regulatory authority under 14 CFR:
Operating Context Regulatory Authority SB Mandatory Status Legal Basis / Regulatory Mechanism
Part 91 General Aviation 14 CFR Part 91 Advisory / Optional Manufacturer lacks statutory rulemaking authority under 49 U.S.C. § 44701
SB Mandated by an AD 14 CFR Part 39 Mandatory Incorporated by reference into federal rule; enforceable under 14 CFR § 39.7
Part 121 / 135 CAMP Program 14 CFR 121 / 135 Mandatory Enforceable through FAA-approved Operations Specifications and CAMP
SB in Airworthiness Limitations 14 CFR 21.50 / 91.403(c) Mandatory Mandatory type design limitation under 14 CFR § 91.403(c)
Incorporation by Reference in an Airworthiness Directive : When an AD issued under 14 CFR Part 39 mandates compliance with an SB (e.g., "accomplish paragraphs 2.A through 2.E of Service Bulletin No. 542" ), those specified portions become federal law under 14 CFR § 39.7 .
FAA-Approved Continuous Airworthiness Maintenance Programs (CAMP) : Under 14 CFR Part 121 and 14 CFR Part 135 (specifically § 135.411(a)(2) ), aircraft must be maintained under an approved CAMP. If operations specifications adopt manufacturer SBs, compliance is legally binding.
Airworthiness Limitations Section (ALS) of the ICAs : Under 14 CFR §§ 21.50, 23.1529, and 25.1529 , Instructions for Continued Airworthiness (ICAs) include an ALS containing mandatory inspection intervals and retirement times. If an SB is incorporated into the ALS, compliance is mandatory for all operators under 14 CFR § 91.403(c) .
Supplemental Type Certificates (14 CFR Part 21 Subpart E)
Under 14 CFR § 21.113 , a Supplemental Type Certificate (STC) approves a major change in type design to a certificated product that is not so extensive as to require a new application for a Type Certificate under 14 CFR § 21.19 . STCs authorize major upgrades including engine conversions, gross weight increases, STOL kits, vortex generators, and modern avionics suites.
STC Holder Rights and Written Permission (§ 91.403(d))
An STC is proprietary intellectual property. Under 14 CFR § 91.403(d) and 14 CFR § 21.120 , any person altering an aircraft based on an STC must be either the STC holder or possess written permission (a licensing agreement or letter of authorization) from the STC holder. Installing an STC using unapproved technical drawings is illegal.
Approved Model List (AML) Verification
Most commercial STCs include an Approved Model List (AML) . The IA must verify that the specific aircraft make, model, and serial number are explicitly listed on the AML, and confirm that any prerequisite modifications required by the STC (such as heavy-duty landing gear or specific governors) are installed.
Instructions for Continued Airworthiness (ICA)
Under 14 CFR § 21.50(b) , the STC holder must provide complete ICAs. When an STC is installed, the IA must ensure that all recurring ICA inspections (e.g., ultrasonic spar checks or specialized lubrication intervals) are permanently integrated into the aircraft's inspection checklist.
The Multi-STC Compatibility Trap & IA Responsibility
Important
The Compatibility Trap : Every STC is engineered, ground-tested, and flight-tested on a baseline, unmodified factory aircraft. When an aircraft receives multiple STCs over its operating life, unforeseen structural, electrical, or aerodynamic conflicts can emerge.
Consider an aircraft with an STC for extended-range wingtip fuel tanks that later installs an STC for leading-edge STOL cuffs. The tip tanks alter wing twist and bending moments, while the cuffs alter stall aerodynamics and roll authority. Neither STC manufacturer ever evaluated both modifications simultaneously.
Under FAA policy — AC 20-188, Compatibility of Changes to Type Design Installed on Aircraft (issued December 9, 2016) — and Part 43, the person performing the alteration and the IA approving it on FAA Form 337 bear legal responsibility for ensuring that the newly installed alteration does not adversely interact with previously installed modifications. If incompatibility exists, the aircraft cannot be returned to service until engineering substantiation (e.g., a DER Form 8110-3) resolves the conflict.
STC Installation and Documentation Checklist
Verification Step Regulatory Requirement Documentation Action
STC Eligibility 14 CFR Part 21 Subpart E Verify aircraft serial number is listed on STC Approved Model List (AML)
Written Permission 14 CFR 91.403(d) Verify owner possesses written permission/license letter from STC holder
Multi-STC Compatibility AC 20-188 ( Compatibility of Changes to Type Design Installed on Aircraft ) / 14 CFR Part 43 Evaluate physical, electrical, and aerodynamic interactions with prior STCs
FAA Form 337 14 CFR Part 43 Appendix B Execute Form 337 in duplicate; cite STC number and approved data in Block 8
- AFMS Placement 14 CFR 91.9 Insert Airplane Flight Manual Supplement into cockpit operating manual
- Weight & Balance 14 CFR 91.417(a)(2)(vi) Calculate revised empty weight and EWCG; update equipment list
- ICA Integration 14 CFR 21.50(b) Integrate STC inspection requirements into aircraft recurring checklist
- Common Exam Traps & IA Watchpoints
Warning
High-Yield Exam Traps for Section 4.3 :
Trap: Manufacturer "Mandatory" SBs : Bulletins labeled "Mandatory" are not legally binding under Part 91 unless tied to an AD, CAMP, or ALS.
Trap: Multi-STC Compatibility : Two independently approved STCs are not automatically compatible when installed together on the same airframe. The IA must evaluate compatibility.
Trap: Missing AFMS : Failing to insert the approved Flight Manual Supplement into the cockpit renders the aircraft unairworthy under 14 CFR § 91.9.
Trap: Installing STC Without Permission : Installing an STC without written permission from the STC holder violates 14 CFR § 91.403(d).