Study guide
1.2 IA Privileges, Limitations & Operational Authority
FAA Inspection Authorization IAR
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: 14 CFR Part 65 Subpart D — Inspection Authorization
1.1 IA Eligibility, Experience & Application Requirements 1.2 IA Privileges, Limitations & Operational Authority 1.3 Duration, Validity & Biennial Renewal Requirements
2 Chapter 2: 14 CFR Part 43 — Maintenance, Alterations & Performance Standards
2.1 Scope of Part 43 & Authorized Maintenance Personnel 2.2 Major vs. Minor Repairs, Alterations & Preventive Maintenance 2.3 Performance Rules & Standards of Workmanship (14 CFR 43.13)
3 Chapter 3: Determining Airworthiness & Inspection Procedures
3.1 The Two-Part Airworthiness Standard & IA Determination 3.2 Conducting Annual & 100-Hour Inspections (14 CFR 43.15 & Appendix D) 3.3 Progressive Inspections & Disapproval Procedures (14 CFR 43.11 & 91.409)
4 Chapter 4: Airworthiness Directives, Service Bulletins, TCDS & STCs
4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking 4.2 Type Certificate Data Sheets & Aircraft Specifications 4.3 Manufacturer Service Information & Supplemental Type Certificates
5 Chapter 5: Major Repairs, Alterations, FAA Form 337 & Form 8130-3
5.1 Approved Data vs. Acceptable Data: Legal Standards & Sources 5.2 FAA Form 337: Preparation, Execution & Distribution 5.3 FAA Field Approvals, DER Data & Form 8130-3 Traceability
6 Chapter 6: Weight and Balance Calculations & Adverse Loading Checks
6.1 Weight & Balance Fundamentals, Scale Weighing & EWCG 6.2 Forward and Aft Adverse-Condition Loading Checks 6.3 Ballast Calculations, Equipment Changes & Percent MAC
7 Chapter 7: Technical Publications, Data Precedence & Inoperative Equipment
7.1 Publication Hierarchy, Technical Data Precedence & ICAs 7.2 MMEL vs. Operator MEL: Relief, Operations & Deferral Procedures 7.3 Operating with Inoperative Equipment Without an MEL (14 CFR 91.213(d))
8 Chapter 8: Maintenance Records, Retention, Transfer & Return to Service
8.1 Maintenance Record Entries & Return-to-Service Standards (14 CFR 43.5, 43.7, 43.9) 8.2 Inspection Record Entries & Certification Statements (14 CFR 43.11) 8.3 Record Retention, Aircraft Transfer & Rebuilt Engine Records (14 CFR 91.417, 91.419, 91.421)
9 Chapter 9: Structural Repairs, Sheet Metal Layout & Welded Steel Structure (AC 43.13-1B)
9.1 Sheet Metal Layout: Bend Radius, Setback, Bend Allowance & Sight Lines 9.2 Riveted Repair Design: Rivet Alloys, Substitution, Edge Distance & Spacing 9.3 Welded Steel Tubular Structure: Splices, Sleeves & Engine Mount Repairs
10 Chapter 10: Aircraft Hardware, Control Cables, Fluid Lines & Electrical Standards
10.1 Aircraft Hardware, Control Cables, Turnbuckles & Safetying Methods 10.2 Fluid Lines, Flexible Hose & Minimum Bend Radius Standards 10.3 Electrical Wire Sizing, Conductor Temperature & Load Analysis
11 Chapter 11: Alteration Design Substantiation, Corrosion Control & Powerplant Standards
11.1 Alteration Design Fundamentals: Limit vs. Ultimate Loads & Static Proof Testing 11.2 Corrosion Recognition, Control & Damage Limits 11.3 Powerplant, Propeller & Nondestructive Inspection Standards for the IA
12 Chapter 12: Part 21 Product Certification, Parts Eligibility & Reading Type Data
12.1 Part 21 Certification Framework: TC, PC, PMA, TSO & Owner-Produced Parts 12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes 12.3 Airworthiness Certificates, Required Documents, Marking & Registration
1.2 IA Privileges, Limitations & Operational Authority
Key Takeaways Explain This Topic AI
Under 14 CFR § 65.95(a)(1), an IA may inspect and approve for return to service any aircraft or related part or appliance — except an aircraft maintained under a Part 121 continuous airworthiness program — after a major repair or major alteration done in accordance with technical data approved by the Administrator.
Under 14 CFR § 65.95(a)(2), an IA may conduct annual inspections and may perform or supervise progressive inspections in accordance with 14 CFR Parts 43 and 91.
IA inspection and return-to-service authority is strictly personal and non-delegable; an IA cannot delegate inspection tasks or sign-off authority to an apprentice, another mechanic, or an assistant.
An IA cannot approve for return to service any major repair or alteration executed with only acceptable data (such as AC 43.13-1B); FAA-approved data (such as an AD, STC, approved service bulletin, or Form 8110-3) is mandatory.
If an IA relocates their fixed base of operations, 14 CFR § 65.95(c) strictly prohibits the exercise of any IA privileges until written notification has been submitted to the responsible Flight Standards office.
Last updated: September 2026
1.2 IA Privileges, Limitations & Operational Authority
Important
The Return-to-Service Mandate : The Inspection Authorization is strictly an inspection, conformity verification, and airworthiness determination privilege, not a maintenance performance credential. When an IA approves a major repair or major alteration, they certify that the completed work conforms in all respects to FAA-approved technical data and is in a condition for safe operation. An IA cannot approve any major repair or alteration that lacks approved data, nor can they delegate their inspection responsibilities to anyone else.
Holding an Inspection Authorization confers substantial legal authority under the Federal Aviation Regulations, placing the holder in a position of direct public trust. The primary statutory framework establishing what an IA holder may and may not do is codified in 14 CFR § 65.95 (Inspection authorization: Privileges and limitations) . Understanding the precise boundary between an A&P mechanic's general privileges under Part 65 Subpart D and an IA holder's specialized inspection authority under § 65.95 is one of the most heavily tested areas on the FAA IA examination.
Statutory Scope of IA Privileges: 14 CFR § 65.95(a)
Section 65.95(a) enumerates the affirmative authorities granted to an Inspection Authorization holder. These privileges center on two major operational domains: approving major repairs and alterations, and conducting annual or progressive inspections.
Major Repairs and Major Alterations Approvals (§ 65.95(a)(1))
Under 14 CFR § 65.95(a)(1) , an IA may:
Broad Scope of Products : Inspect and approve for return to service any aircraft, airframe, engine, propeller, appliance, or component part after a major repair or major alteration performed in accordance with 14 CFR Part 43 .
The Approved Data Prerequisite : This authority is strictly conditional: the work must have been executed in accordance with technical data approved by the Administrator . If the data used to execute the repair or alteration is merely "acceptable" rather than "approved," the IA has no legal authority to sign the approval.
FAA Form 337 Execution : When approving a major repair or major alteration, the IA executes Block 7 (Approval for Return to Service) of FAA Form 337 (Major Repair and Alteration) . By signing Block 7, the IA legally certifies that they have personally inspected the repair or alteration and found it to conform to the approved technical data listed in Block 8.
Annual and Progressive Inspection Authority (§ 65.95(a)(2))
Under 14 CFR § 65.95(a)(2) , an IA possesses the exclusive privilege to:
Conduct Annual Inspections : Perform an annual inspection in accordance with 14 CFR §§ 43.13 and 43.15 . An annual inspection is a comprehensive, complete-aircraft airworthiness review required by 14 CFR § 91.409(a). While an A&P mechanic may perform a 100-hour inspection, only an IA, a certificated repair station appropriately rated, or the manufacturer may perform and approve an annual inspection.
Perform or Supervise Progressive Inspections : Perform or supervise a progressive inspection program conducted under 14 CFR § 91.409(d) and § 43.15(d). Unlike annual inspections, which cannot be delegated, § 65.95(a)(2) explicitly allows an IA to supervise a progressive inspection. Under this supervision, qualified A&P mechanics may execute routine inspection tasks while the IA maintains overall administrative and airworthiness oversight.
Critical Limitations and Operational Prohibitions
The privileges granted by § 65.95 are matched by rigorous regulatory restrictions designed to safeguard aviation safety and prevent conflicts of interest.
The Strict Non-Delegation Principle
Inspection Authorization authority is personal and non-delegable . An IA cannot:
Authorize another mechanic, apprentice, or helper to conduct an annual inspection and sign the aircraft maintenance records based on their findings.
Assign their return-to-service sign-off authority to an employer, business partner, or repair station manager.
Sign a maintenance record entry or Form 337 without having personally inspected the aircraft, system, or article. Personal inspection requires direct visual and physical examination of the work performed, verification of dimensions and tolerances, review of conformity records, and assessment of operating condition.
The Approved Data Imperative vs. Acceptable Data
A frequent area of regulatory confusion—and exam questions—is the difference between acceptable data and approved data :
Acceptable Data : Guidance publications such as FAA Advisory Circular AC 43.13-1B contain methods, techniques, and practices acceptable to the Administrator. While an A&P mechanic may use AC 43.13-1B as acceptable data to perform minor repairs, it is not automatically approved data for major repairs or major alterations (unless explicitly authorized by the FAA or cited as an approved source in a specific directive).
Approved Data : Technical data explicitly approved by the FAA, including:
- Airworthiness Directives (ADs)
- Type Certificate Data Sheets (TCDS) and Aircraft Specifications
- Supplemental Type Certificates (STCs)
- FAA Designated Engineering Representative (DER) Approved Data (documented on FAA Form 8110-3)
- FAA Aviation Safety Inspector Field Approvals (documented in Block 3 of FAA Form 337)
Manufacturer Maintenance Manuals or Service Bulletins specifically designated as FAA-approved.
The IA's Legal Boundary : An IA cannot generate approved data or approve a major alteration performed without approved data. If an alteration lacks approved data, the IA must ensure the data is submitted to the FAA for field approval or engineering review before approving the aircraft for return to service.
The One Statutory Exclusion: Part 121 Continuous Airworthiness Programs
Read § 65.95(a)(1) literally. The parenthetical exclusion is narrow and names exactly one program:
"Inspect and approve for return to service any aircraft or related part or appliance ( except any aircraft maintained in accordance with a continuous airworthiness program under part 121 of this chapter ) after a major repair or major alteration to it in accordance with part 43 of this chapter, if the work was done in accordance with technical data approved by the Administrator."
What the rule excludes : aircraft maintained under a Part 121 continuous airworthiness program . That is the only aircraft class carved out of the IA's major repair/major alteration return-to-service privilege by § 65.95(a)(1).
What the rule does not say : it does not name Part 135. A Part 135 operator that maintains an aircraft under a continuous airworthiness maintenance program per § 135.411(a)(2) will, as a practical matter, release work through its own approved program and authorized personnel under § 43.7(e), and the operator's manual controls how that aircraft is maintained. But the § 65.95(a)(1) exception itself reaches only Part 121 — do not read Part 135 into the regulatory text on the test.
Practical effect for the IAR test : a question asking which aircraft an IA may approve after a major alteration accomplished with approved data (for example, a commuter-category multiengine turboprop and a transport-category turbojet both operated under Part 91) is answered "either one." Category, weight, and engine type are irrelevant to § 65.95(a)(1); only the Part 121 continuous airworthiness program exclusion matters.
Separation of Functions: Performing vs. Inspecting
Under 14 CFR Part 43 and Part 65:
When a major repair or major alteration is performed, the installing mechanic executes Block 6 (Conformity Statement) of FAA Form 337 using their A&P certificate number .
The approving IA executes Block 7 (Approval for Return to Service) using their Inspection Authorization number (or mechanic certificate number with "IA" designation).
While a single dual-rated technician holding an IA may perform the work as an A&P and then inspect and approve it as an IA, the two legal capacities are distinct. An IA authorization conveys no performance authority—the right to perform maintenance flows entirely from the underlying A&P certificate.
Administrative Responsibilities: Display and Relocation
Under 14 CFR § 65.95(b) and (c) , an IA must comply with specific operational rules:
Presentation of Authorization (§ 65.95(b)) : The IA must keep their authorization available for inspection. They must present it upon request to:
The aircraft owner or operator.
The mechanic submitting the aircraft, repair, or alteration for approval.
The FAA Administrator or an authorized representative.
An authorized representative of the National Transportation Safety Board (NTSB).
Any Federal, State, or local law enforcement officer.
Change of Fixed Base of Operations (§ 65.95(c)) : If an IA relocates their fixed base of operations, they may not exercise the privileges of the authorization until they have notified the responsible Flight Standards office (or International Field Office) for the new area in writing of the change. This restriction takes effect immediately upon the move.
Comparison Matrix: IA Privileges vs. Limitations
Operational Function Permitted IA Privileges Regulatory Limitations & Prohibitions Governing Regulation
Major Repairs & Alterations Inspect and approve for return to service on Form 337 Block 7 Cannot approve unless work conforms to FAA-approved technical data 14 CFR § 65.95(a)(1)
Annual Inspections Perform complete annual inspection and approve return to service Authority is non-delegable ; cannot use assistants to sign off annuals 14 CFR § 65.95(a)(2)
Progressive Inspections Perform or supervise progressive inspections under Part 43/91 Must follow approved progressive inspection schedule and procedures 14 CFR § 65.95(a)(2)
Commercial Air Carriers Approve any aircraft after a major repair/alteration done to approved data, regardless of category or weight Excluded only from aircraft maintained under a Part 121 continuous airworthiness program 14 CFR § 65.95(a)(1)
Change of Base May relocate fixed base of operations to any FSDO jurisdiction Cannot exercise privileges until written notice is sent to the FAA 14 CFR § 65.95(c)
Personal Inspection Exercise independent technical judgment on airworthiness Must personally inspect ; cannot approve based on photographs or phone calls 14 CFR § 65.95(a)
Common Exam Traps & Regulatory Distinctions
Delegation of Annuals : An IA cannot delegate any part of an annual inspection to an apprentice or an A&P. The word "supervise" in § 65.95(a)(2) attaches only to progressive inspections — read the sentence carefully, because the exam builds distractors on exactly this asymmetry.
AC 43.13-1B as Approved Data : AC 43.13-1B is acceptable data, not approved data. An IA cannot approve a major alteration based solely on AC 43.13-1B without an approved field approval or engineering substantiation.
Change of Base Notice : Written notice to the FSDO must precede the exercise of privileges; verbal notice or post-inspection notification is a regulatory violation under § 65.95(c).
100-Hour vs. Annual Sign-Off : An A&P can sign off a 100-hour inspection, but signing an annual inspection requires an IA (or repair station/manufacturer).