Study guide

12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes

FAA Inspection Authorization IAR

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: 14 CFR Part 65 Subpart D — Inspection Authorization

1.1 IA Eligibility, Experience & Application Requirements 1.2 IA Privileges, Limitations & Operational Authority 1.3 Duration, Validity & Biennial Renewal Requirements

2 Chapter 2: 14 CFR Part 43 — Maintenance, Alterations & Performance Standards

2.1 Scope of Part 43 & Authorized Maintenance Personnel 2.2 Major vs. Minor Repairs, Alterations & Preventive Maintenance 2.3 Performance Rules & Standards of Workmanship (14 CFR 43.13)

3 Chapter 3: Determining Airworthiness & Inspection Procedures

3.1 The Two-Part Airworthiness Standard & IA Determination 3.2 Conducting Annual & 100-Hour Inspections (14 CFR 43.15 & Appendix D) 3.3 Progressive Inspections & Disapproval Procedures (14 CFR 43.11 & 91.409)

4 Chapter 4: Airworthiness Directives, Service Bulletins, TCDS & STCs

4.1 Airworthiness Directives: Authority, Applicability & Compliance Tracking 4.2 Type Certificate Data Sheets & Aircraft Specifications 4.3 Manufacturer Service Information & Supplemental Type Certificates

5 Chapter 5: Major Repairs, Alterations, FAA Form 337 & Form 8130-3

5.1 Approved Data vs. Acceptable Data: Legal Standards & Sources 5.2 FAA Form 337: Preparation, Execution & Distribution 5.3 FAA Field Approvals, DER Data & Form 8130-3 Traceability

6 Chapter 6: Weight and Balance Calculations & Adverse Loading Checks

6.1 Weight & Balance Fundamentals, Scale Weighing & EWCG 6.2 Forward and Aft Adverse-Condition Loading Checks 6.3 Ballast Calculations, Equipment Changes & Percent MAC

7 Chapter 7: Technical Publications, Data Precedence & Inoperative Equipment

7.1 Publication Hierarchy, Technical Data Precedence & ICAs 7.2 MMEL vs. Operator MEL: Relief, Operations & Deferral Procedures 7.3 Operating with Inoperative Equipment Without an MEL (14 CFR 91.213(d))

8 Chapter 8: Maintenance Records, Retention, Transfer & Return to Service

8.1 Maintenance Record Entries & Return-to-Service Standards (14 CFR 43.5, 43.7, 43.9) 8.2 Inspection Record Entries & Certification Statements (14 CFR 43.11) 8.3 Record Retention, Aircraft Transfer & Rebuilt Engine Records (14 CFR 91.417, 91.419, 91.421)

9 Chapter 9: Structural Repairs, Sheet Metal Layout & Welded Steel Structure (AC 43.13-1B)

9.1 Sheet Metal Layout: Bend Radius, Setback, Bend Allowance & Sight Lines 9.2 Riveted Repair Design: Rivet Alloys, Substitution, Edge Distance & Spacing 9.3 Welded Steel Tubular Structure: Splices, Sleeves & Engine Mount Repairs

10 Chapter 10: Aircraft Hardware, Control Cables, Fluid Lines & Electrical Standards

10.1 Aircraft Hardware, Control Cables, Turnbuckles & Safetying Methods 10.2 Fluid Lines, Flexible Hose & Minimum Bend Radius Standards 10.3 Electrical Wire Sizing, Conductor Temperature & Load Analysis

11 Chapter 11: Alteration Design Substantiation, Corrosion Control & Powerplant Standards

11.1 Alteration Design Fundamentals: Limit vs. Ultimate Loads & Static Proof Testing 11.2 Corrosion Recognition, Control & Damage Limits 11.3 Powerplant, Propeller & Nondestructive Inspection Standards for the IA

12 Chapter 12: Part 21 Product Certification, Parts Eligibility & Reading Type Data

12.1 Part 21 Certification Framework: TC, PC, PMA, TSO & Owner-Produced Parts 12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes 12.3 Airworthiness Certificates, Required Documents, Marking & Registration

12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes

Key Takeaways Explain This Topic AI

Type certificate data sheets and Aircraft Specifications are organized by model, with serial number ranges and numbered Notes that make the eligible configuration serial-number specific.

Weight and balance data on a data sheet, including the weight and arm of unusable fuel and undrainable oil, is read from the model section that covers the specific serial number.

When an aircraft's empty weight center of gravity falls within the empty weight CG range published on the data sheet, computation of critical forward and aft CG positions is unnecessary.

Required equipment is identified in the data sheet's equipment section and Notes, and an item listed as required must be installed for the aircraft to conform to type design.

Where the data sheet does not carry an item such as the marking and placard list, the approved flight manual for that model supplies it, and 14 CFR 91.9 makes those markings and placards mandatory.

Last updated: September 2026

12.2 Reading Type Data: Serial-Number-Specific Lookups & Interpreting Notes

Note

The IAR test supplies the data; it grades the lookup. The Computer Testing Supplement for Inspection Authorization provides excerpts of data sheets, specifications, ADs, and charts. Nothing in this section needs to be memorized aircraft by aircraft. What must be automatic is the method : identify the model section, confirm the serial number falls in range, apply the Notes, and read the right line.

Section 4.2 established what a TCDS and an Aircraft Specification are . This section is about working them.

How a Data Sheet Is Organized

Every FAA data sheet follows the same skeleton, and knowing it turns a five-minute hunt into a fifteen-second lookup: HEADER Sheet number, revision number and date, TC holder, models covered

  • |
  • v
  • MODEL SECTION Repeated once per model (e.g., "I - Model J3C-40", "II - Model J3C-50")

| Within each model section, in a consistent order:

  • | Engine
  • | Fuel
  • | Engine Limits
  • | Propeller and Propeller Limits (diameter max/min, static rpm)
  • | Airspeed Limits
  • | C.G. Range
  • | Empty Weight C.G. Range
  • | Maximum Weight
  • | Number of Seats (with arms)
  • | Maximum Baggage (with arm)
  • | Fuel Capacity (with arm)
  • | Oil Capacity (with arm)
  • | Control Surface Movements
  • | Serial Nos. eligible
  • v
  • DATA PERTINENT TO ALL MODELS Datum, leveling means, certification basis,
  • production basis, equipment
  • |
  • v
  • NOTES Numbered notes that modify, restrict, or extend the data above

Two structural facts drive most lookup errors. First, the model section is authoritative for that model and does not carry over to the next model — engine limits for a J3C-50 tell you nothing about a J3C-65. Second, the Notes are not commentary ; they are part of the approved data and frequently narrow eligibility by serial number.

Serial Number Eligibility

Each model section ends with the serial numbers eligible under it, and Notes commonly carve out subsets. A worked example from Aircraft Specification A-691 (Piper J-3 series) shows the pattern: the base model carries a CG range of (+10.6) to (+22.7), and Note 3 lists specific serial numbers that are eligible only with a restricted CG range of (+10.6) to (+21.5) as a landplane, with different limits on floats.

For the IA this is the whole ballgame:

Read the data plate , not the paperwork, for the serial number.

Find the model section that lists that serial number.

Read every Note referenced in that section, and scan the Notes for any that name serial numbers.

Apply the most restrictive applicable value.

Skipping step 3 produces confidently wrong answers, because the base data looks complete on its own.

Extracting Weight and Balance Items

Data sheets carry the constants that a weight and balance revision depends on, and the exam asks for them directly:

  • Item on the Data Sheet What It Gives You Where It Is Used
  • Datum The reference plane for all arms Every moment calculation (Section 6.1)
  • Leveling means How to level the aircraft for weighing Weighing procedure
  • Empty Weight C.G. Range The range within which adverse checks are unnecessary Section 6.1 and 6.2
  • C.G. Range Forward and aft flight limits, often varying with weight Adverse loading checks
  • Maximum Weight Certificated gross weight, sometimes by category Loading and alteration limits
  • Number of Seats (with arms) Seat count and station Adverse loading checks
  • Maximum Baggage (with arm) Compartment limit and station Adverse loading checks and placards
  • Fuel Capacity (with arm) Total capacity, usable/unusable split, fuel arm Empty weight, minimum fuel
  • Oil Capacity (with arm) Oil quantity and station CAR 3 vs Part 23 oil accounting

Unusable fuel and undrainable oil deserve special mention because they are the most commonly asked lookup. Empty weight includes unusable fuel (Section 6.1), so the data sheet's weight and arm of unusable fuel are inputs to the empty weight and empty weight moment. A question asking for "the location for weight and balance purposes of any unusable fuel" on a specific serial number is asking you to find the right model section, check the Notes for a serial-number-specific value, and read the arm.

The EWCG range shortcut , stated on the data sheet itself in the classic formula: "When empty weight C.G. falls within range given, computation of critical fore and aft C.G. positions is unnecessary." That sentence — printed on the specification, not merely a handbook convention — is the regulatory basis for the adverse-check exemption discussed in Section 6.1. Note the caveat that usually follows it: the range is not valid for non-standard arrangements.

Interpreting the Notes

Notes carry the operational meat. Common Note types and what they do:

Note Type Typical Content Why the IA Cares

Weight and balance note Requires a current weight and balance report and equipment list Establishes the required records

Placard note Lists the exact placards required, with wording § 91.9 makes them mandatory; missing placards ground the aircraft

Serial number note Restricts limits or eligibility for named serial numbers Changes the answer for that airplane

  • Equipment note Identifies required versus optional equipment Conformity to type design
  • Engine/propeller note Adds eligible combinations or weight changes for a given installation Conformity and W&B
  • Fuel note Approved grades, and any restrictions such as unleaded prohibitions Airworthiness and placarding

Ferry/overweight note States conditions under which overweight ferry is structurally acceptable Special flight permit support

A useful discipline: read the Notes before the model data , not after. Notes reframe what you are about to read, and reading them last means re-reading everything.

When the Data Sheet Does Not Have It

Not everything lives on the data sheet, and knowing where else to look is itself an exam topic.

Marking and placard lists for many later aircraft are carried in the FAA-approved Airplane Flight Manual rather than in the TCDS Notes. The certification rules require operating limitations to be furnished in the form of placards, markings, and manuals, so on a modern airplane the AFM is the authoritative list. If a data sheet is silent on placards, the approved flight manual — not the maintenance manual and not the sales literature — is the next document.

Operating limitations for an aircraft whose TCDS does not itemize them are found in the approved flight manual .

Instructions for Continued Airworthiness , including any Airworthiness Limitations Section, come from the design approval holder under § 21.50(b), not from the data sheet (Chapter 7).

Required equipment for a kind of operation comes from the Kinds of Operations Equipment List in the AFM and from § 91.205 (Section 7.3), not from the data sheet.

A Repeatable Lookup Procedure 1. Read the data plate: make, model, serial number.

2. Open the correct data sheet and confirm the REVISION DATE in the header box.

3. Locate the model section that lists this serial number.

4. Read every Note that section references, plus any Note naming serial numbers.

5. Read the specific line asked for (engine, arm, capacity, travel, seats).

6. Apply the most restrictive applicable value.

7. Cross-check against the aircraft's records for STCs or 337s that changed it.

Step 7 is the one an inspector adds that a test-taker sometimes forgets: the data sheet describes the aircraft as type certificated . Approved alterations legitimately move the aircraft away from that baseline, and the current approved configuration is the data sheet plus the STCs and Form 337s in the records.

High-Yield Exam Traps

Serial number governs. Model alone is not enough; Notes routinely restrict specific serial ranges.

The revision date is in the box on page one , and it is the date of the most recent revision.

Unusable fuel has both a weight and an arm , and both are on the data sheet.

"When empty weight C.G. falls within range given, computation of critical fore and aft C.G. positions is unnecessary" — and the range is not valid for non-standard arrangements.

If the data sheet is silent on placards or operating limitations, go to the approved flight manual , not to the maintenance manual.

The data sheet is the type-certificated baseline ; approved STCs and 337s in the records modify it.