Study guide
19.3 Taxi Operations: Signs, Markings, Lighting, and Runway Incursion Avoidance
FAA Private Pilot — Airplane PAR
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 ACS Codes, the AKTR, and How to Use This Guide
2 Pilot Qualifications & Medicals
2.1 Eligibility, Training, and Knowledge-Test Authorization 2.2 Private Pilot Privileges and Limitations 2.3 Medical Certificates, Duration, and Disqualification 2.4 BasicMed (14 CFR 61.113(i) and Part 68)
3 Airworthiness, Documents & Currency
3.1 Required Pilot and Aircraft Documents 3.2 Inspections, Airworthiness Directives, and Preventive Maintenance 3.3 Inoperative Equipment and 91.213 3.4 Recent Flight Experience and the Flight Review
4 14 CFR Part 91 Operating Rules
4.1 Right-of-Way, Minimum Safe Altitudes, and Speed Limits 4.2 VFR Cruising Altitudes, Altimeter Settings, and Oxygen 4.3 Fuel Requirements, Transponder, ADS-B, and ELT 4.4 NOTAMs, TFRs, and Accident/Incident Duties
5 National Airspace System
5.1 Class A, B, and C Airspace 5.2 Class D, E, and G Airspace and VFR Weather Minimums 5.3 Special Use Airspace 5.4 Other Airspace, TFRs, TRSA, ADIZ, and SFRA
6 Aviation Weather Theory
6.1 Atmosphere, Pressure, Temperature, and Density 6.2 Stability, Clouds, and Moisture 6.3 Air Masses and Fronts 6.4 Wind, Jet Stream, and Local Wind Systems
7 Weather Hazards
7.1 Thunderstorms and Convective Weather 7.2 Structural Icing, Frost, and Carburetor Ice 7.3 Fog, Low Ceilings, and Visibility 7.4 Wind Shear, Microbursts, Turbulence, and Mountain Waves
8 Weather Products & Briefings
8.1 METAR Decoding 8.2 TAF and Graphical Forecast Products 8.3 PIREPs, AIRMET, SIGMET, Convective SIGMET, and Winds Aloft 8.4 Briefings and Go/No-Go Decisions
9 Principles of Flight
9.1 Four Forces and Lift Production 9.2 Angle of Attack, Critical AoA, and Stalls 9.3 Drag, L/D, and Ground Effect 9.4 Axes, Stability, and Flight Controls
10 Maneuvering Flight, Stalls & Spins
10.1 Load Factor, Bank Angle, and Stall Speed 10.2 Left-Turning Tendencies 10.3 Slow Flight, Power-On/Off Stalls, and Spin Awareness 10.4 Steep Turns and Ground-Reference Maneuvers
11 Powerplant, Fuel & Electrical Systems
11.1 Reciprocating Engines, Mixture, Detonation, and Preignition 11.2 Ignition, Magnetos, Carburetor vs Fuel Injection 11.3 Fuel Grades, Contamination, and Fuel-System Management 11.4 Electrical System and Alternator Failure
12 Flight Instruments & Avionics
12.1 Pitot-Static Instruments and Blockage Errors 12.2 Gyroscopic Instruments, Vacuum Failure, and Magnetic Compass Errors 12.3 Engine Instruments, Transponder Modes, and Basic Avionics
13 Aircraft Performance
13.1 Pressure Altitude, Density Altitude, and Performance Effects 13.2 Takeoff and Climb Performance 13.3 Cruise, Descent, and Landing Performance 13.4 Wind, Gradient, Surface, and Crosswind Component
14 Weight and Balance
14.1 Weight-and-Balance Principles 14.2 Moment, CG, and Sample Computations 14.3 Forward and Aft CG Effects 14.4 V-Speeds, Markings, and Limitation Placards
15 Charts, Pilotage & Dead Reckoning
15.1 Sectional Chart Symbology and Airspace Depiction 15.2 Pilotage and Dead Reckoning 15.3 Variation, Deviation, Wind Triangle, and E6B 15.4 VFR Cross-Country and Fuel Planning
16 Radio Navigation, Lost Procedures & Airport Operations
16.1 VOR Navigation 16.2 GPS, RAIM, and Radar Services 16.3 Lost Procedures and Diversion 16.4 Communications, Light-Gun Signals, Lighting, and Traffic Patterns
17 Aeromedical Factors
17.1 Hypoxia, Hyperventilation, and Carbon Monoxide 17.2 Spatial Disorientation, Illusions, and Vision 17.3 Scuba-to-Flight, Alcohol/Drugs, and IMSAFE
18 ADM, Night Operations & Emergencies
18.1 ADM, Hazardous Attitudes, PAVE, and DECIDE 18.2 Night Operations and Night Illusions 18.3 Emergency Descent, Engine Failure, and System Malfunctions 18.4 Survival Gear, ELT, and Forced-Landing Considerations
19 Preflight Procedures & Airport Ground Operations
19.1 Preflight Assessment, Airworthiness Determination, and the Preflight Inspection 19.2 Flight Deck Management, Passenger Briefings, and Engine Starting 19.3 Taxi Operations: Signs, Markings, Lighting, and Runway Incursion Avoidance 19.4 Before-Takeoff Check, After-Landing, and Securing the Airplane
20 Class-Specific Knowledge: Seaplane & Multiengine
20.1 Seaplane and Water Operations Knowledge 20.2 Multiengine Knowledge: VMC, VYSE, and Engine-Out Fundamentals
19.3 Taxi Operations: Signs, Markings, Lighting, and Runway Incursion Avoidance
Key Takeaways Explain This Topic AI
Runway markings are WHITE and taxiway markings are YELLOW; that single rule decodes most airport-surface questions.
A mandatory instruction sign has a RED background with a WHITE inscription; a location sign is BLACK with a YELLOW inscription and yellow border; direction and destination signs are YELLOW with BLACK inscriptions and arrows.
The runway holding position marking is four yellow lines — two solid, two dashed — and you hold on the SOLID side; at a towered airport you may not cross it without a specific ATC clearance.
On the movement/non-movement area boundary marking, the SOLID line is on the non-movement (ramp) side, and crossing into the movement area requires a clearance at a towered airport.
Runway Status Lights are fully automated and advisory: illuminated red RELs or THLs mean do not proceed, but RWSL verifies an ATC clearance and never substitutes for or conveys one.
Last updated: August 2026
Taxiing is where the private pilot knowledge test tests runway incursion avoidance , and the questions are almost always decoded by two rules.
Rule one: runway markings are WHITE; taxiway markings are YELLOW. Centerlines, edge lines, hold lines, and direction markings painted in yellow belong to the taxiway world. Runway designators, centerlines, threshold bars, aiming points, and touchdown-zone bars are white.
Rule two: on a paired solid/dashed marking, the SOLID side is the restricted side. You hold on the solid side and you may cross from the dashed side without a clearance.
Airport signs — decode by color first
Sign type Colors What it tells you
Mandatory instruction RED background, WHITE inscription Entrance to a runway, a critical area, or a prohibited area — "16-34", "ILS", "NO ENTRY". Do not pass without a clearance at a towered field.
Location BLACK background, YELLOW inscription, yellow border Where you are right now — "B" means you are on Taxiway B. A yellow-on-black "22" is a runway location sign: you are on runway 22.
Direction YELLOW background, BLACK inscription and arrow The direction of an intersecting taxiway at the next intersection.
Destination YELLOW background, BLACK inscription and arrow The direction to a destination such as RWY 27, an FBO, or the fuel pumps.
Information YELLOW background, BLACK inscription Local information — frequencies, noise abatement procedures.
Runway distance remaining BLACK background, WHITE numeral Thousands of feet of runway remaining.
The pairing that trips candidates up is a black location sign sitting next to a yellow direction sign. Read the black one first — it tells you where you are — then the yellow one, which tells you where the turns go.
The markings that keep you out of trouble
Runway holding position marking. Four yellow lines: two solid, two dashed . You approach from the dashed side and hold short on the solid side . At a towered airport you may not cross it onto the runway without a specific clearance, and hold-short instructions must be read back. This marking is also used on a taxiway to hold traffic clear of an intersecting runway.
Holding position for an ILS critical area. Two solid yellow lines joined by pairs of perpendicular lines — it looks like a ladder. Hold here when instructed so your airframe does not distort the localizer or glideslope signal.
Movement/non-movement area boundary marking. Two yellow lines, one solid and one dashed . The solid line is on the non-movement (ramp) side. Crossing from the ramp into the movement area needs a clearance at a towered airport.
Taxiway centerline. A continuous yellow line. An enhanced centerline — the centerline flanked by dashed yellow lines — warns that you are approaching a runway holding position marking, typically within about 150 feet.
Displaced threshold. White arrows leading to white arrowheads at a bar across the runway. The pavement before the displaced threshold is not available for landing , but it is usable for takeoff, and for rollout after landing from the other direction .
Blast pad, overrun, or stopway. Yellow chevrons . Not usable for taxi, takeoff, or landing — chevrons mean stay off.
Wind indicators and airport lighting on the ground
Wind indicators (PA.II.D.K4) are the wind sock, the wind tee, and the tetrahedron, usually inside a segmented circle whose extended legs show the traffic pattern direction for each runway. The wind sock is the only one of the three that also shows wind strength ; a tetrahedron may be manually positioned and should not be trusted blindly.
Aircraft lighting (PA.II.D.K5): the anticollision beacon goes on before engine start and stays on until shutdown — it is the signal that the propeller is a hazard. Position (navigation) lights are required from sunset to sunrise under 91.209. The taxi light is for taxiing; the landing light is normally added when entering or crossing a runway so you are conspicuous. Strobes are customarily off while taxiing near others and on when you take the runway.
Hot spots (PA.II.D.K6a) are labeled HS 1, HS 2 on FAA airport diagrams and described in the Chart Supplement. They mark intersections with a history of, or potential for, confusion and incursions. Studying the airport diagram before you start the engine is the single most effective incursion countermeasure, along with writing down the taxi clearance.
Entering or crossing runways (PA.II.D.K6c): at a towered airport you need a specific clearance for each runway you cross. A clearance to taxi to a destination does not authorize crossing any runway along the way. At a non-towered airport, self-announce on the CTAF and look before you enter — nobody else is separating you.
Night taxi (K6d) demands slower speeds, reliance on the blue taxiway edge lights and green taxiway centerline lights, and extra care because signs are harder to read. Low-visibility taxi (K6e) is where airports operate under a Surface Movement Guidance and Control System plan; ask for progressive taxi instructions rather than guessing.
Runway Status Lights (RWSL)
ACS element PA.III.A.K9 names Runway Status Lighting Systems. RWSL is a fully automated system driven by surveillance data. It has two states — red on, or off — and two subsystems a private pilot meets:
Runway Entrance Lights (REL): in-pavement red lights along the taxiway centerline at the hold line and out to the runway edge. Illuminated red means the runway is unsafe to enter or cross — stop and remain stopped.
Takeoff Hold Lights (THL): in-pavement red lights in the runway takeoff-hold area. Illuminated red means it is unsafe to begin the takeoff roll because traffic is on the runway ahead.
Three rules the AIM states plainly:
Never cross over illuminated red lights. If ATC has issued a clearance and the lights are red, stop, tell ATC you are holding for red lights, and re-confirm.
Do not proceed when the lights extinguish without an ATC clearance. RWSL verifies a clearance; it does not substitute for or convey one.
Expect to see the lights cycle on and off several times while you wait — that is normal as traffic moves.