Study guide
14.2 Moment, CG, and Sample Computations
FAA Private Pilot — Airplane PAR
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 ACS Codes, the AKTR, and How to Use This Guide
2 Pilot Qualifications & Medicals
2.1 Eligibility, Training, and Knowledge-Test Authorization 2.2 Private Pilot Privileges and Limitations 2.3 Medical Certificates, Duration, and Disqualification 2.4 BasicMed (14 CFR 61.113(i) and Part 68)
3 Airworthiness, Documents & Currency
3.1 Required Pilot and Aircraft Documents 3.2 Inspections, Airworthiness Directives, and Preventive Maintenance 3.3 Inoperative Equipment and 91.213 3.4 Recent Flight Experience and the Flight Review
4 14 CFR Part 91 Operating Rules
4.1 Right-of-Way, Minimum Safe Altitudes, and Speed Limits 4.2 VFR Cruising Altitudes, Altimeter Settings, and Oxygen 4.3 Fuel Requirements, Transponder, ADS-B, and ELT 4.4 NOTAMs, TFRs, and Accident/Incident Duties
5 National Airspace System
5.1 Class A, B, and C Airspace 5.2 Class D, E, and G Airspace and VFR Weather Minimums 5.3 Special Use Airspace 5.4 Other Airspace, TFRs, TRSA, ADIZ, and SFRA
6 Aviation Weather Theory
6.1 Atmosphere, Pressure, Temperature, and Density 6.2 Stability, Clouds, and Moisture 6.3 Air Masses and Fronts 6.4 Wind, Jet Stream, and Local Wind Systems
7 Weather Hazards
7.1 Thunderstorms and Convective Weather 7.2 Structural Icing, Frost, and Carburetor Ice 7.3 Fog, Low Ceilings, and Visibility 7.4 Wind Shear, Microbursts, Turbulence, and Mountain Waves
8 Weather Products & Briefings
8.1 METAR Decoding 8.2 TAF and Graphical Forecast Products 8.3 PIREPs, AIRMET, SIGMET, Convective SIGMET, and Winds Aloft 8.4 Briefings and Go/No-Go Decisions
9 Principles of Flight
9.1 Four Forces and Lift Production 9.2 Angle of Attack, Critical AoA, and Stalls 9.3 Drag, L/D, and Ground Effect 9.4 Axes, Stability, and Flight Controls
10 Maneuvering Flight, Stalls & Spins
10.1 Load Factor, Bank Angle, and Stall Speed 10.2 Left-Turning Tendencies 10.3 Slow Flight, Power-On/Off Stalls, and Spin Awareness 10.4 Steep Turns and Ground-Reference Maneuvers
11 Powerplant, Fuel & Electrical Systems
11.1 Reciprocating Engines, Mixture, Detonation, and Preignition 11.2 Ignition, Magnetos, Carburetor vs Fuel Injection 11.3 Fuel Grades, Contamination, and Fuel-System Management 11.4 Electrical System and Alternator Failure
12 Flight Instruments & Avionics
12.1 Pitot-Static Instruments and Blockage Errors 12.2 Gyroscopic Instruments, Vacuum Failure, and Magnetic Compass Errors 12.3 Engine Instruments, Transponder Modes, and Basic Avionics
13 Aircraft Performance
13.1 Pressure Altitude, Density Altitude, and Performance Effects 13.2 Takeoff and Climb Performance 13.3 Cruise, Descent, and Landing Performance 13.4 Wind, Gradient, Surface, and Crosswind Component
14 Weight and Balance
14.1 Weight-and-Balance Principles 14.2 Moment, CG, and Sample Computations 14.3 Forward and Aft CG Effects 14.4 V-Speeds, Markings, and Limitation Placards
15 Charts, Pilotage & Dead Reckoning
15.1 Sectional Chart Symbology and Airspace Depiction 15.2 Pilotage and Dead Reckoning 15.3 Variation, Deviation, Wind Triangle, and E6B 15.4 VFR Cross-Country and Fuel Planning
16 Radio Navigation, Lost Procedures & Airport Operations
16.1 VOR Navigation 16.2 GPS, RAIM, and Radar Services 16.3 Lost Procedures and Diversion 16.4 Communications, Light-Gun Signals, Lighting, and Traffic Patterns
17 Aeromedical Factors
17.1 Hypoxia, Hyperventilation, and Carbon Monoxide 17.2 Spatial Disorientation, Illusions, and Vision 17.3 Scuba-to-Flight, Alcohol/Drugs, and IMSAFE
18 ADM, Night Operations & Emergencies
18.1 ADM, Hazardous Attitudes, PAVE, and DECIDE 18.2 Night Operations and Night Illusions 18.3 Emergency Descent, Engine Failure, and System Malfunctions 18.4 Survival Gear, ELT, and Forced-Landing Considerations
19 Preflight Procedures & Airport Ground Operations
19.1 Preflight Assessment, Airworthiness Determination, and the Preflight Inspection 19.2 Flight Deck Management, Passenger Briefings, and Engine Starting 19.3 Taxi Operations: Signs, Markings, Lighting, and Runway Incursion Avoidance 19.4 Before-Takeoff Check, After-Landing, and Securing the Airplane
20 Class-Specific Knowledge: Seaplane & Multiengine
20.1 Seaplane and Water Operations Knowledge 20.2 Multiengine Knowledge: VMC, VYSE, and Engine-Out Fundamentals
14.2 Moment, CG, and Sample Computations
Key Takeaways Explain This Topic AI
PA.I.F.S1 is a three-step skill: compute total weight and CG, add or remove weight and recompute, then decide whether both weight and CG sit inside the AFM envelope.
Build the table every time: empty weight + front seats + rear seats + baggage + usable fuel. CG = Σ moments ÷ Σ weights.
Adding fuel moves CG toward the tank arm. Removing aft baggage moves CG forward. Same pounds taken off two different arms do not produce the same new CG.
The computational table and the loading-graph / moment-index method are the same arithmetic. An index is only moment ÷ 100 or ÷ 1,000.
Under max weight with a CG past a limit is still a no-go. Over max weight with a pretty CG is also a no-go.
Last updated: August 2026
ACS PA.I.F.S1 is not “know the formula.” It is compute the weight and balance, correct an out-of-limit loading, and decide whether the result is inside the published envelope. FAA-H-8083-1 and PHAK Chapter 10 do that with a table: one row per item, three columns (weight, arm, moment), a total row, and a division. The knowledge test will hand you a table or a loading graph that is the same idea in picture form.
This section uses one generic four-place trainer so the arithmetic is checkable. It is not a substitute for any real AFM. Limits for the examples:
- BEW 1,500 lb at 39.0 in (full oil already in BEW)
- Maximum ramp 2,557 lb; maximum takeoff 2,550 lb ; maximum landing 2,450 lb; maximum baggage 120 lb
- Front-seat arm 37.0 in, rear-seat arm 73.0 in, baggage 95.0 in, usable fuel 48.0 in
- Avgas at 6 lb/gal
Envelope for these weights: forward limit 35.5 in (light) expanding to 39.5 in at 2,550 lb; aft limit 47.3 in at all weights
The table method, every time
Start with the current BEW and empty-weight moment from the airplane’s record.
Convert fuel gallons to pounds ( × 6 ).
Enter each occupant group and each baggage compartment at its published arm. Use actual body weights when you have them.
Moment = weight × arm on every line. Add the weight column. Add the moment column.
CG = total moment ÷ total weight , then round only at the end (tenths of an inch is the usual training precision).
Compare total weight with ramp / takeoff / landing limits, and CG with the envelope at that weight.
Example 1 — two-up local flight
- Item Weight (lb) Arm (in) Moment (lb-in)
- Basic empty weight 1,500 39.0 58,500
- Front seats (pilot + passenger) 340 37.0 12,580
- Rear seats 0 73.0 0
- Baggage 50 95.0 4,750
- Fuel, 40 gal × 6 240 48.0 11,520
- Totals 2,130 87,350
CG = 87,350 ÷ 2,130 = 41.0 in (87,350 ÷ 2,130 = 41.009…).
Takeoff weight 2,130 is 420 lb under 2,550. At this weight the forward limit is well forward of 41.0 and the aft limit is 47.3, so the point is inside . Useful load used is 340 + 50 + 240 = 630 lb of the 1,050 lb available.
Add 10 gallons of fuel (a common “we decided to go farther” move). Ten gallons are 60 lb at arm 48.0, moment +2,880 .
- New weight = 2,130 + 60 = 2,190 lb
- New moment = 87,350 + 2,880 = 90,230 lb-in
- New CG = 90,230 ÷ 2,190 = 41.2 in
The fuel arm (48.0) is aft of the old CG (41.0), so adding fuel walked the CG aft 0.2 in — toward the tank. Still inside. Still under 2,550.
Remove the 50 lb baggage from the original 2,130-lb loading, instead of adding fuel. Baggage moment was 4,750.
- New weight = 2,130 − 50 = 2,080 lb
- New moment = 87,350 − 4,750 = 82,600 lb-in
- New CG = 82,600 ÷ 2,080 = 39.7 in
The bag sat at 95.0, far aft of 41.0, so taking it off walked the CG forward 1.3 in. Same airplane, opposite direction from the fuel add. That is PA.I.F.S1: change one line, recompute both totals, read the new inch.
Example 2 — four souls, legal CG, illegal weight
- Item Weight (lb) Arm (in) Moment (lb-in)
- Basic empty weight 1,500 39.0 58,500
- Front seats 380 37.0 14,060
- Rear seats 340 73.0 24,820
- Baggage 100 95.0 9,500
- Fuel, 48 gal × 6 288 48.0 13,824
- Totals 2,608 120,704
CG = 120,704 ÷ 2,608 = 46.3 in (46.282…).
Aft limit 47.3 — the inch is inside . Maximum takeoff 2,550 — the weight is 58 lb over . A pretty CG does not bless an overweight airplane. You must offload 58 lb before brake release; the examples below take 60 lb so the gallons stay even.
Fix A — drain 10 gal (60 lb) of fuel at arm 48.0, moment −2,880:
Weight 2,548 lb , moment 117,824 , CG 46.2 in (117,824 ÷ 2,548 = 46.242)
Weight is now 2 lb under 2,550. CG barely moved, because the fuel arm (48.0) was close to the already-aft 46.3-in CG.
Fix B — remove 60 lb of baggage at arm 95.0, moment −5,700, leave the fuel alone:
Weight 2,548 lb , moment 115,004 , CG 45.1 in (115,004 ÷ 2,548 = 45.135)
Same 60 lb off the airplane, 1.1 in more forward than Fix A, because 95.0 is much farther from the old CG than 48.0 is. Choose the offload that also keeps you inside baggage and fuel-reserve rules — but computationally, where the pounds come off matters as much as how many .
Landing check after Fix A, 30 gal burned en route (180 lb at 48.0, moment −8,640):
- Landing weight 2,368 lb , moment 109,184 , CG 46.1 in
- 2,368 is under the 2,450-lb landing limit; 46.1 is still forward of 47.3
Fuel burn at a tank near the current CG hardly walks the inch. It still has to be computed if the envelope is tight.
Graph method versus table method
The computational table above is the source of truth. The graph method in most light-airplane POHs is the same math drawn as two pictures:
A loading graph : enter an item’s weight, read its moment index (moment ÷ 100 or ÷ 1,000).
A CG envelope (moment envelope): plot total weight against total index. If the point is inside the polygon, both weight and CG are legal.
For Example 1 with a ÷1,000 index: empty 58.50 + front 12.58 + baggage 4.75 + fuel 11.52 = 87.35 . Then CG = (87.35 × 1,000) ÷ 2,130 = 41.0 in — identical. Use the reduction factor printed on that chart. Do not mix a ÷100 index with a ÷1,000 index. Do not read the loading graph in gallons.
How to decide if you are inside
Ask two questions, in either order, and require both yes:
Is total ramp / takeoff / landing weight at or below the published maximum for that condition?
At that weight, is CG at or between the forward and aft limits (and inside any side-of-envelope cutoffs, utility-category cutouts, or zero-fuel-weight limits the AFM draws)?
If either answer is no, change the load — offload, shift bags, move a person, or leave fuel in the truck — and recompute . Guessing that “the rear seats will pull it back enough” is not a method.
Scenario: Maya’s full-tank family trip
Maya loads Example 2, sees 46.3 in, and says “CG is fine.” It is. The airplane is still 58 lb over maximum takeoff. She drains 10 gallons, recomputes 2,548 lb and 46.2 in, and only then opens the takeoff-distance chart at that weight. The chart from Chapter 13 does not apply to the 2,608-lb airplane she almost taxied out.