Study guide

1.5 Foreign Acquisition, Buy American & Trade Agreements (FAR Part 25)

FAC-C Professional Contracting Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Contracting System & FAR Foundations

1.1 FAC-C Professional Exam Logistics & Certification Path 1.2 FAR Structure, System Architecture & Authority 1.3 Ethics, Standards of Conduct & Conflict of Interest (FAR Part 3) 1.4 Protection of Privacy & Freedom of Information (FAR Part 24) 1.5 Foreign Acquisition, Buy American & Trade Agreements (FAR Part 25) 1.6 Government Property Administration & Liability (FAR Part 45)

2 Chapter 2: Acquisition Planning & Market Research

2.1 Acquisition Planning & Strategy Development (FAR Part 7) 2.2 Market Research Techniques & Commercial Determinations (FAR Part 10 & 12) 2.3 Describing Agency Needs & Performance Work Statements (FAR Part 11) 2.4 Publicizing Contract Actions & Synopsis Rules (FAR Part 5) 2.5 Competition Requirements & Justifications for Other Than Full and Open Competition (FAR Part 6) 2.6 Organizational Conflicts of Interest (OCI) Identification & Mitigation (FAR Subpart 9.5)

3 Chapter 3: Commercial & Simplified Acquisition

3.1 Commercial Products & Services Acquisition (FAR Part 12) 3.2 Simplified Acquisition Procedures (SAP) & Micro-Purchases (FAR Part 13) 3.3 Commercial Streamlined Evaluation & Award Protocols (FAR 12.6 & 13.106) 3.4 Governmentwide Commercial Purchase Card & Electronic Micro-Purchases (FAR 13.301) 3.5 Blanket Purchase Agreements, SF 44 & Imprest Funds 3.6 Fast Payment Procedures & Unpriced Purchase Orders (FAR 13.4 & 13.2)

4 Chapter 4: Solicitations, Contracting Methods & Contract Types

4.1 Sealed Bidding Procedures & Execution (FAR Part 14) 4.2 Contracting by Negotiation & Source Selection (FAR Part 15) 4.3 Fixed-Price Contract Types (FFP, FPIF, FPEA) (FAR Part 16) 4.4 Cost-Reimbursement Contract Types (CPFF, CPIF, CPAF) (FAR Part 16) 4.5 Indefinite-Delivery Contracts & Task/Delivery Orders (RFO Subpart 16.5) 4.6 Time-and-Materials, Labor-Hour & Letter Contracts (FAR Subpart 16.6)

5 Chapter 5: Cost & Price Analysis, Small Business & Negotiations

5.1 Proposal Evaluation & Competitive Range Determination (FAR 15.306) 5.2 Price Analysis Techniques & Commercial Pricing (FAR 15.404-1) 5.3 Cost Analysis, Certified Cost/Pricing Data & TAA (FAR 15.403 & 15.404) 5.4 Small Business Programs & Set-Aside Rules (FAR Part 19) 5.5 Pre-Negotiation Objectives & Competitive Negotiations (FAR 15.406) 5.6 Contract Financing & Advance/Progress Payments (FAR Part 32)

6 Chapter 6: Contract Administration, Modifications, Disputes & Protests

6.1 Post-Award Orientation, COR Delegation & Quality Assurance (FAR Part 42 & 46) 6.2 Contract Modifications, Scope & Change Orders (FAR Part 43) 6.3 Subcontract Management & Consent to Subcontract (FAR Part 44) 6.4 Contract Options, Extensions & Performance Evaluation (RFO Parts 17 & 42) 6.5 Contract Terminations for Convenience & Default (FAR Part 49) 6.6 Bid Protests, Disputes, Appeals & Contract Closeout (RFO Parts 33 & 4)

1.5 Foreign Acquisition, Buy American & Trade Agreements (FAR Part 25)

Key Takeaways Explain This Topic AI

The Buy American Act (41 U.S.C. chapter 83 / FAR Subpart 25.1 & 25.2) applies a price evaluation penalty to foreign end products to encourage domestic manufacturing.

To qualify as a domestic end product under the Buy American Act, an item must be manufactured in the U.S. and the cost of domestic components must exceed 65% of the total component cost (rising to 75% in 2029).

Buy American Act price evaluation penalties add 20% for large business offers, 30% for small business offers, and 50% for Department of Defense acquisitions.

The Trade Agreements Act (TAA - 19 U.S.C. 2501 / FAR Subpart 25.4) waives Buy American Act restrictions for acquisitions at or above TAA thresholds ($174,000 for supplies/services; $6,683,000 for construction).

Under the Trade Agreements Act, acquisitions follow an 'all-or-nothing' rule: offerors must supply domestic products or eligible products from TAA-designated countries, and non-eligible foreign offers MUST be rejected.

Last updated: July 2026

1.5 Foreign Acquisition, Buy American & Trade Agreements (FAR Part 25)

Federal policy mandates favoring domestic end products and domestic construction materials while adhering to international trade agreements negotiated by the United States. FAR Part 25 (Foreign Acquisition) establishes rules governing foreign procurement, implementing two primary statutes: the Buy American Act and the Trade Agreements Act .

The Buy American Act (BAA - FAR Subpart 25.1 & 25.2)

The Buy American Act (41 U.S.C. chapter 83) applies to supply acquisitions exceeding the Micro-purchase Threshold ($15,000) and construction contracts up to the Trade Agreements Act threshold. BAA creates a preference for domestic end products and domestic construction materials .

Two-Part Test for Domestic End Products (FAR 25.101)

An unmanufactured end product is domestic if it has been mined or produced in the U.S. A manufactured end product qualifies as domestic only if it satisfies a strict two-part test :

Manufacturing Location: The end product must be manufactured in the United States; AND

Component Content Threshold: The cost of domestic components must exceed 65% of the total cost of all components (phased content requirement under Executive Order 14005, set at 65% for 2024–2028, and rising to 75% in 2029).

COTS Exception: For Commercially Available Off-The-Shelf (COTS) items, the 65% component test is waived, and the item qualifies as domestic if manufactured in the U.S. (except for COTS fasteners or iron/steel items).

Price Evaluation Penalty Method (FAR 25.105)

The BAA does not prohibit purchasing foreign products. Instead, it applies a price evaluation penalty to foreign offers during evaluation to determine award:

20% Penalty: Added to the foreign offer price if the lowest domestic offer is from a large business.

30% Penalty: Added to the foreign offer price if the lowest domestic offer is from a small business concern.

50% Penalty: Applied in Department of Defense (DoD) acquisitions under DFARS 225.105.

BAA Price Evaluation Worked Scenario

Consider a civilian agency solicitation for electronic equipment. Three offers are received:

  • Offeror A (Domestic Small Business): $100,000
  • Offeror B (Domestic Large Business): $95,000
  • Offeror C (Foreign Offeror): $80,000

Evaluation: Because the lowest domestic offer ($95,000) is from a large business, a 20% penalty is added to the foreign offer ($80,000 × 1.20 = $96,000 evaluated price). Comparing Offeror B ($95,000) against Offeror C's evaluated price ($96,000), Offeror B wins award at $95,000 because the domestic price is lower than the evaluated foreign price.

Statutory BAA Exceptions (FAR 25.103)

Contracting Officers may grant BAA exceptions for: Public Interest, Nonavailability (class or individual determination by HCA/CO), Unreasonable Cost (when domestic price after penalty exceeds foreign price), Resale, or Micro-purchases.

The Trade Agreements Act (TAA - FAR Subpart 25.4)

The Trade Agreements Act of 1979 (19 U.S.C. 2501 et seq.) authorizes the President to waive the Buy American Act for acquisitions at or above statutory TAA financial thresholds. When TAA applies, BAA restrictions are completely waived for eligible products from TAA-designated countries.

  • TAA Financial Thresholds
  • Supply & Service Contracts: $174,000
  • Construction Contracts: $6,683,000
  • The TAA "All-or-Nothing" Rule

Unlike the Buy American Act (which uses price evaluation penalties), the Trade Agreements Act enforces an all-or-nothing rule . Contracting Officers MUST acquire ONLY domestic end products or eligible products from TAA-designated countries (World Trade Organization Government Procurement Agreement [WTO GPA] signatories, Free Trade Agreement partners, Least Developed Countries, and Caribbean Basin Countries). Non-eligible foreign offers MUST BE REJECTED unless no eligible domestic or designated country offers are received.

Substantial Transformation Test

Under TAA, an item manufactured in a non-designated country becomes an eligible product of a designated country if it undergoes substantial transformation in a designated country into a new and different article of commerce with a distinct name, character, or use.

Direct BAA vs. TAA Comparison Matrix

  • Regulatory Parameter Buy American Act (BAA) Trade Agreements Act (TAA)
  • Primary Goal Encourage domestic manufacturing Waive domestic preference for trade partners
  • Applicable Threshold $15,000 up to TAA threshold $174,000 (Supplies) / $6,683,000 (Construction)

Domestic Content Test U.S. manufacture + 65% domestic components U.S. or Designated Country + Substantial Transformation

Evaluation Method Price penalty (20% Large / 30% Small / 50% DoD) All-or-Nothing Rule (Reject non-eligible foreign offers)

  • COTS Item Treatment Component content test waived Substantial transformation test applies
  • Buy American Act Waiver Protocols & Defense Balance of Payments Policy

When a contractor requests a Buy American Act (BAA) exception based on non-availability or unreasonable cost, the Contracting Officer must verify the factual basis before granting relief. Under FAR 25.103(b), non-availability determinations for individual acquisitions exceeding the SAT require formal coordination with technical specialists and public notification where applicable. Additionally, in Department of Defense acquisitions under DFARS Part 225, the Balance of Payments Program applies BAA-like evaluation preferences to overseas contracts exceeding the SAT to minimize expenditures of U.S. dollars abroad. For Commercially Available Off-The-Shelf (COTS) items, while the 65% component content test is generally waived, Congress explicitly retained component content testing for COTS fasteners, iron, and steel construction materials to protect domestic heavy industrial capacity.