Study guide
3.2 Distress Communications & Alerting
FCC General Radiotelephone Operator License GROL
Track your progress as you read
Finished sections get a check mark.
1 Introduction & GROL Exam Overview
1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process
2 Element 1: Rules & Regulations
2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules
3 Element 1: Communications Procedures
3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities
4 Element 1: Equipment Operations
4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure
5 Element 1: Other Equipment & Antennas
5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information
6 Element 3: Electrical Principles
6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer
7 Element 3: Electrical Math
7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance
8 Element 3: Circuit Components — Passives & Power Devices
8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs
9 Element 3: Active Components — Transistors & Devices
9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design
10 Element 3: Practical Circuits — RLC, Op Amps & Schematics
10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow
11 Element 3: Digital Logic
11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters
12 Element 3: Receivers
12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth
13 Element 3: Transmitters
13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology
14 Element 3: Signals, Emissions & Modulation
14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types
15 Element 3: Power Sources
15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies
16 Element 3: Antennas & Feed Lines
16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth
17 Element 3 Background: Propagation & Radio Practice
17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering
18 Element 3: Aircraft Radio Navigation Systems
18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions
19 Element 3: Installation, Maintenance & Repair
19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis
20 Element 3: Communications Technology & Marine Systems
20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks
21 Element 3: RADAR & Satellite Systems
21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS
22 Element 3: RF & Electrical Safety
22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians
23 Study Strategy & Exam Day
23.1 Study Strategy, Practice Plan & Exam Day
3.2 Distress Communications & Alerting
Key Takeaways Explain This Topic AI
Maritime priority order is distress (highest), then urgency, then safety, then routine/other communications
MAYDAY indicates grave and imminent danger requiring immediate assistance; PAN PAN is urgency; SECURITE is safety (navigation/weather warnings)
A complete distress message includes vessel identity, position, nature of distress, assistance needed, and useful rescue particulars; spoken MAYDAY is repeated three times
False or accidental distress alerts are prohibited and must be cancelled properly on Channel 16 (VHF) or 2182 kHz (MF) and related DSC bands—never ignored
Channel 16 (156.8 MHz) and 2182 kHz are core radiotelephony distress/calling frequencies; DSC (including VHF Ch-70) automates alerting under GMDSS concepts tested in Element 1
Last updated: August 2026
3.2 Distress, Urgency & Safety Communications
Quick Answer: Priority is always Distress → Urgency → Safety → Routine . Speak MAYDAY for grave and imminent danger needing immediate help, PAN PAN for urgency short of distress, and SECURITE for important navigational or meteorological warnings. Use Channel 16 (VHF) and 2182 kHz (MF) for radiotelephony distress/calling; cancel any false distress alert immediately with a proper “all stations” cancellation. Never invent a MAYDAY, and never leave a false DSC alert uncancelled.
Element 1 Subelement B expects operators to choose the correct priority, build a legal distress message, and behave correctly when someone else is in distress. These rules save lives only when every station on the frequency follows them.
Priority Order (Memorize Exactly)
All stations in the maritime mobile service must respect four priority levels:
Priority Category Spoken / signal cue Typical examples
1 (highest) Distress MAYDAY (×3) Sinking, fire out of control, grounding with imminent loss of vessel/life, person overboard in extreme conditions
2 Urgency PAN PAN (×3) Medical assistance needed (not yet distress), serious but not immediately life-ending situation, urgent safety of ship/person
- 3 Safety SECURITE (×3) Navigation hazard, storm warning, light extinguished, special aid to navigation
- 4 (lowest) Routine / other Normal calling Business traffic, radio checks, routine ship-to-ship work
Pool language: the order of priority of radiotelephone communications is distress calls and signals , followed by communications preceded by Urgency and Safety signals, then all other communications . Another phrasing: highest priority communications from ships at sea are distress , then communications preceded by urgency , then safety .
Urgency has lower priority than distress —never the reverse. Routine ship-to-ship chatter does not outrank SECURITE.
- Distress (MAYDAY)
- Definition
A distress communication is an internationally recognized communication indicating that the sender is threatened by grave and imminent danger and requests immediate assistance .
Distress traffic includes all messages about the immediate assistance required by a ship, aircraft, or other vehicle so threatened—including life safety of persons on board and situations such as man overboard when they meet the distress standard.
What a distress message must include
Exam items expect all of the following content themes:
- Identity — name of vessel; call sign / registration; phonetic identification as required
- Position — latitude/longitude or bearing/distance from a known point; other position data that aids rescue
- Nature of distress and kind of assistance required
- Additional rescue particulars — vessel length, color, type; number of persons on board; other helpful details
The radiotelephone distress call and message structure is tested as all of the above : MAYDAY spoken three times, vessel name/call sign identification, position and particulars, nature of distress, and assistance required.
- Voice procedure skeleton (Channel 16 or 2182 kHz)
- Select Channel 16 (VHF) or 2182 kHz (MF radiotelephony distress/calling), high power as needed for distress
- MAYDAY, MAYDAY, MAYDAY
- THIS IS [vessel name ×3], call sign / MMSI as appropriate
- Repeat MAYDAY and vessel name
- Position , nature of distress , assistance required , other useful information
- Listen for acknowledgment; control or follow control of distress traffic
If equipped with DSC , a distress alert can be sent with a dedicated distress function (MMSI and position when GPS is interfaced). Voice follow-up on the associated distress frequency remains essential so nearby vessels and RCC coordinators hear the situation.
- Urgency (PAN PAN)
- Definition and signal
The internationally recognized urgency signal in radiotelephony is “PAN PAN” spoken three times before the urgency call (pronounced like the French panne ).
A typical urgency transmission is a request for medical assistance that does not rise to the level of distress, or another very urgent message concerning the safety of a ship, aircraft, vehicle, or person—without the “grave and imminent danger / immediate assistance” threshold of MAYDAY.
Authority
The urgency signal concerning safety of a ship, aircraft, or person shall be sent only on the authority of the master of the ship or the person responsible for the mobile station (either).
Do not use PAN PAN for routine inconvenience. Do not use MAYDAY when PAN PAN fits—false inflation of priority blocks real distress.
Safety (SECURITE)
A safety transmission indicates that a station is preparing to transmit an important navigation or weather warning .
- Radiotelephony safety signal: SECURITE (French pronunciation) spoken three times before the call
- Radiotelegraphy safety group: TTT (know it exists; Element 1 emphasizes voice SECURITE)
Safety signal and call are normally sent on an international distress frequency ( 2182 kHz or 156.8 MHz / Channel 16 ), then the detailed warning may continue on a working channel (for example, U.S. Coast Guard often announces on 16, then broadcasts details on Channel 22A )
Exam wording: the safety signal call word spoken three times to announce a storm warning , danger to navigation , or special aid to navigation is SECURITE —not “SAFETY,” not PAN PAN, not MAYDAY.
Control of Distress Traffic & Resume Normal Working
When distress is in progress:
- Cease transmissions that could interfere with distress traffic
- Listen —do not break in unless you can render assistance or relay
- Acknowledge if you are in a position to help or if you are the appropriate coast/RCC station
- Relay (MAYDAY RELAY) when the vessel in distress cannot be heard by shore stations but you can
- Follow the station controlling distress traffic (often a Coast Guard unit or RCC)
When distress ends, stations resume normal working only after the distress is cancelled or the controlling station releases the frequency—do not casually reopen Channel 16 for routine chatter while SAR is still using it
- Operator responsibilities when hearing distress
- Keep continuous watch on the distress frequency
Log distress traffic as required (distress-related logs have longer retention—three years in the logkeeping topics)
Render communications assistance consistent with GMDSS/Part 80 responsibilities: every ship must be able to perform communications functions essential for the safety of the ship itself and of other ships
- Do not transmit “curiosity” questions that clog the channel
- False Distress Alerts — Prohibited & Must Be Cancelled
Knowingly transmitting a false distress signal is illegal and can divert search-and-rescue resources. Accidental DSC or voice alerts also happen— silence is not a cure . Cancel immediately.
- VHF DSC false alert (concept)
- Stop/reset the equipment as appropriate
- Set radio to Channel 16
- Broadcast to “All stations” with ship name, call sign, MMSI/DSC identity, position
- Clearly cancel the false distress alert , with date/time UTC
- MF false alert concept
Same idea on 2182 kHz radiotelephony after resetting equipment. HF false alerts must be cancelled on each band used.
Never “hope no one heard it.” Coast Guard and other stations treat distress as real until cancelled.
Channel 16, 2182 kHz, DSC & Silence Periods
Resource Role
VHF Channel 16 (156.8 MHz) International distress, safety, and calling for VHF radiotelephony; continuous watch for compulsory stations
- 2182 kHz MF radiotelephony distress and calling frequency
- VHF Channel 70 DSC only —distress alerts, safety announcements, and digital calling; no routine voice
- DSC controller Equipment programmed to initiate distress alerts and calls to individual stations
Silence periods on 2182 kHz When a watch is required on 2182 kHz, observe a 3-minute silent period at :00 and :30 past the hour so weak distress signals can be heard
GMDSS concept (Key Topic 12)
GMDSS (Global Maritime Distress and Safety System) is intended to automate and improve emergency communications in the maritime industry. The basic concept includes:
- Alerting search and rescue authorities ashore
- Alerting shipping in the immediate vicinity
- Enabling coordinated SAR with minimum delay
GMDSS is primarily based on linking shore SAR authorities with shipping near a vessel in distress . It is required for SOLAS Convention ships of 300 gross tonnage or more (pool answer). DSC distress alerting (single-button alert with MMSI/position) is the modern automated front end to that system—but Element 1 still expects mastery of classic voice MAYDAY procedure on 16 and 2182 kHz.
Decision Guide for Operators
- Situation Signal
- Vessel sinking / fire uncontrolled / imminent loss of life MAYDAY
- Serious medical case; urgent help needed but not yet “grave and imminent” PAN PAN
- Floating container in channel; storm warning; navaid failure SECURITE
- Lunch plans, radio check, cargo schedule Routine on a working channel
- Accidental DSC distress push Cancel immediately on voice distress channel
Master the signals, the priority stack, and the cancellation duty—Element 1 will test all three.