Study guide
5.6 NAVTEX & Maritime Safety Information
FCC General Radiotelephone Operator License GROL
Track your progress as you read
Finished sections get a check mark.
1 Introduction & GROL Exam Overview
1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process
2 Element 1: Rules & Regulations
2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules
3 Element 1: Communications Procedures
3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities
4 Element 1: Equipment Operations
4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure
5 Element 1: Other Equipment & Antennas
5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information
6 Element 3: Electrical Principles
6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer
7 Element 3: Electrical Math
7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance
8 Element 3: Circuit Components — Passives & Power Devices
8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs
9 Element 3: Active Components — Transistors & Devices
9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design
10 Element 3: Practical Circuits — RLC, Op Amps & Schematics
10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow
11 Element 3: Digital Logic
11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters
12 Element 3: Receivers
12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth
13 Element 3: Transmitters
13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology
14 Element 3: Signals, Emissions & Modulation
14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types
15 Element 3: Power Sources
15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies
16 Element 3: Antennas & Feed Lines
16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth
17 Element 3 Background: Propagation & Radio Practice
17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering
18 Element 3: Aircraft Radio Navigation Systems
18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions
19 Element 3: Installation, Maintenance & Repair
19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis
20 Element 3: Communications Technology & Marine Systems
20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks
21 Element 3: RADAR & Satellite Systems
21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS
22 Element 3: RF & Electrical Safety
22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians
23 Study Strategy & Exam Day
23.1 Study Strategy, Practice Plan & Exam Day
5.6 NAVTEX & Maritime Safety Information
Key Takeaways Explain This Topic AI
518 kHz is the primary frequency used exclusively for NAVTEX broadcasts internationally
NAVTEX messages are sent in categories identified by a single letter, and the receiver is programmed to reject unwanted categories and stations
Most NAVTEX stations have a transmitting range of typically 200-400 nautical miles (360-720 km)
NAVTEX broadcasts achieve maximum range in the middle of the night, when 518 kHz medium-frequency propagation is best
Maritime Safety Information can be obtained through NAVTEX, through Inmarsat SafetyNET, and through HF narrow-band direct printing
Last updated: August 2026
5.6 NAVTEX & Maritime Safety Information
Quick Answer: NAVTEX broadcasts internationally on 518 kHz , exclusively. Messages arrive in categories indicated by a single letter . Unwanted broadcasts are suppressed by programming the receiver to reject them . Typical station range is 200–400 nautical miles (360–720 km) , and range is greatest in the middle of the night . MSI reaches ships by NAVTEX, Inmarsat SafetyNET and HF NBDP.
Maritime Safety Information (MSI) is one of the nine GMDSS communications functions from section 3.5, and NAVTEX is its workhorse. Official sub-topic 1-D-24 (NAVTEX) closes Element 1's Other Equipment topic.
What NAVTEX is
NAVTEX is an automatic, unattended, narrow-band direct-printing service. A coast station transmits navigational warnings, meteorological warnings and forecasts, search-and-rescue information and other MSI on a schedule; the shipboard receiver listens continuously, decodes what is relevant, prints or displays it, and discards duplicates. No operator action is required, which is the entire point—an unattended bridge still gets its warnings.
518 kHz — the exclusive international frequency
Which frequency is used exclusively for NAVTEX broadcasts internationally? 518 kHz.
The word exclusively is doing real work in that answer. 518 kHz is set aside worldwide for international NAVTEX in English, so a vessel anywhere can leave one receiver on one frequency and be confident of getting the international service. Two companion frequencies exist and appear as distractors:
- Frequency Use
- 518 kHz International NAVTEX, in English — the exam answer
- 490 kHz National NAVTEX services, often in the local language
- 4209.5 kHz Tropical/HF NAVTEX in some regions
If a question says "exclusively" and "internationally," it wants 518 kHz .
Single-letter message categories
NAVTEX broadcasts are sent in categories of messages indicated by a single letter or identifier.
Each message carries a four-character header: a letter identifying the transmitting station , a letter identifying the message category , and two digits giving the serial number . The category letters that matter most:
Letter Category Can it be rejected?
- A Navigational warnings No
- B Meteorological warnings No
- C Ice reports Yes
- D Search and rescue information, piracy warnings No
- E Meteorological forecasts Yes
- F–Z Pilot service, LORAN, satellite, other Yes
The three that cannot be switched off— A, B and D —are the ones on which life may depend. That is the design safeguard behind the next item.
Rejecting unwanted broadcasts
What means are used to prevent the reception of unwanted broadcasts by vessels utilizing the NAVTEX system? Programming the receiver to reject unwanted broadcasts.
Note what this answer is not . It is not "switching the receiver off," not "retuning to another frequency," and not "asking the coast station to stop." It is receiver-side filtering : the operator programs which station letters and which category letters to accept. A vessel on a coastal passage sets its receiver to accept only nearby stations and only relevant categories, so the printer carries traffic that matters instead of forecasts for a sea area 600 miles away.
And the safeguard holds: categories A, B and D cannot be rejected regardless of how the receiver is programmed.
Range, and why it peaks at night
What is the transmitting range of most NAVTEX stations? Typically 200–400 nautical miles (360–720 km).
When do NAVTEX broadcasts typically achieve maximum transmitting range? Middle of the night.
518 kHz sits in the medium-frequency band, where daytime absorption in the lower ionosphere is strong and coverage is essentially ground wave. After dark that absorption falls away, sky-wave propagation supports the signal, and the same transmitter reaches substantially farther. This is why NAVTEX broadcast schedules are staggered—stations sharing 518 kHz transmit in assigned time slots so that the extended night-time footprints do not collide.
Two practical consequences:
Coverage plans are built around the daytime figure, so 200–400 nautical miles is the number to quote for planning.
At night you may receive stations well outside your area—which is exactly why receiver programming (above) matters.
Where else MSI comes from
MSI can be obtained by one (or more) of the following: all of the above. NAVTEX is one route among several, and GMDSS deliberately provides more than one because a single path is a single point of failure:
- Route Coverage Notes
- NAVTEX (518 kHz) Coastal, out to roughly 200–400 nm Automatic, unattended, printed
Inmarsat SafetyNET (EGC) Satellite, near-global excluding polar Enhanced Group Call; the A3 answer where NAVTEX does not reach
HF NBDP Ocean areas including A4 Narrow-band direct printing on HF
That table maps onto the sea areas from section 3.5: NAVTEX for coastal work, SafetyNET for A3, HF NBDP for the high latitudes of A4. When the pool asks how MSI can be obtained and offers several of these, the inclusive answer is correct.
Exam trap summary
518 kHz — exclusive, international. Not 490 kHz (national), not 2182 kHz (voice distress).
Single letter identifies the category — not a numeric code, not a station callsign.
Unwanted traffic is suppressed by programming the receiver , not by turning it off.
200–400 nautical miles typical range; maximum in the middle of the night .
MSI routes: all of the above .