Study guide
5.2 EPIRBs & Emergency Beacons
FCC General Radiotelephone Operator License GROL
Track your progress as you read
Finished sections get a check mark.
1 Introduction & GROL Exam Overview
1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process
2 Element 1: Rules & Regulations
2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules
3 Element 1: Communications Procedures
3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities
4 Element 1: Equipment Operations
4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure
5 Element 1: Other Equipment & Antennas
5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information
6 Element 3: Electrical Principles
6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer
7 Element 3: Electrical Math
7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance
8 Element 3: Circuit Components — Passives & Power Devices
8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs
9 Element 3: Active Components — Transistors & Devices
9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design
10 Element 3: Practical Circuits — RLC, Op Amps & Schematics
10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow
11 Element 3: Digital Logic
11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters
12 Element 3: Receivers
12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth
13 Element 3: Transmitters
13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology
14 Element 3: Signals, Emissions & Modulation
14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types
15 Element 3: Power Sources
15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies
16 Element 3: Antennas & Feed Lines
16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth
17 Element 3 Background: Propagation & Radio Practice
17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering
18 Element 3: Aircraft Radio Navigation Systems
18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions
19 Element 3: Installation, Maintenance & Repair
19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis
20 Element 3: Communications Technology & Marine Systems
20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks
21 Element 3: RADAR & Satellite Systems
21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS
22 Element 3: RF & Electrical Safety
22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians
23 Study Strategy & Exam Day
23.1 Study Strategy, Practice Plan & Exam Day
5.2 EPIRBs & Emergency Beacons
Key Takeaways Explain This Topic AI
Portable survival-craft VHF sets must work on Channel 16 (and related simplex voice channels such as Ch-6), be watertight, use a permanently affixed antenna, and meet minimum power/ERP performance—not Ch-13 or Ch-70 voice operation
A SART is a 9 GHz (X-band) radar transponder that, once switched ON, replies when interrogated by a 9 GHz radar and paints as about 12 equally spaced dots on the rescuing ship’s display
SART range improves when held as high as possible; its audible alarm tells survivors that assistance may be nearby
An EPIRB is a battery-operated emergency position-indicating radio beacon that can float free, activate, and alert search-and-rescue through the COSPAS-SARSAT satellite system (406 MHz digital alerting)
Change EPIRB batteries after emergency use or by the printed replacement date; cancel a false EPIRB activation by notifying the Coast Guard or RCC immediately
Last updated: August 2026
5.2 Survival Craft Radios, SARTs & EPIRBs
Quick Answer: In the liferaft or lifeboat you need three complementary tools. Portable survival-craft VHF gives Channel 16 voice to ships and rescue units nearby. A SART answers 9 GHz X-band radar with a line of about 12 dots so rescuers can home on radar. An EPIRB is a float-free, battery-powered beacon that alerts COSPAS-SARSAT (primarily 406 MHz ) so shore SAR authorities know you need help. Test carefully, replace batteries on schedule, and never leave a false EPIRB alert uncancelled.
Element 1 Subelement D groups these devices because they are “other equipment” beyond the bridge VHF/MF console—yet they are often what still works after the ship is gone.
Portable Survival-Craft VHF Radiotelephones
Role: two-way voice among survival craft, between survival craft and the mother ship, and between survival craft and rescue units. The pool treats that full set as all of the above .
Capabilities the exam expects
- Requirement / characteristic Element 1 expectation
- Channel 16 Must operate for radiotelephony distress/safety voice
Other simplex channels Commonly Ch-6 (and similar intership safety voice)— not Ch-13 bridge-to-bridge as a required survival-craft feature
Watertight Survive immersion (classic performance idea: watertight to 1 m for 5 minutes )
Permanently affixed antenna Fixed, non-removable antenna so the set stays usable when wet and gloved hands are clumsy
- Simplex voice only No complicated duplex telephone mode required
- Minimum transmitter power 1 watt minimum transmitter power is a classic SCT figure
- Minimum ERP About 0.25 W effective radiated power minimum appears in performance language
- Statements that are NOT true (classic “which is NOT true” stems)
Operates simplex on Channel 70 and at least one other channel — NOT true as a survival-craft voice radio requirement (Ch-70 is DSC , not survival-craft voice traffic).
Operation on Channel 13 — NOT a required survival-craft portable VHF capability (Ch-13 is bridge-to-bridge navigation on the ship).
Memory split:
- Ship bridge → Ch-13 navigational watch, Ch-16 distress/safety/calling, Ch-70 DSC
- Survival craft handheld → Ch-16 voice first; watertight; fixed antenna; simple power-on use
- Carriage concepts (high-level GMDSS / Element 1)
Compulsory GMDSS-oriented ships carry multiple portable two-way VHF sets so they can be placed rapidly into survival craft:
- Vessel type (pool / SOLAS-style framing) Typical portable VHF count concept
- Passenger ships and cargo ≥ 500 GT At least three two-way VHF apparatus
- Cargo 300–500 GT At least two
Stow them so they can be grabbed and carried into survival craft—not locked in a radio room that floods first.
- SART — Search and Rescue Transponder (Radar Beacon)
- What a SART is
A SART is a 9 GHz radar transponder designed to be received on a vessel’s X-band navigational radar (about 9.2–9.5 GHz ). It is not :
- A 406 MHz satellite beacon (that is the EPIRB)
- An S-band-only device
- A DSC controller
- A performance monitor permanently wired into the ship’s radar
- Fact Exam answer
- Frequency band 9 GHz (X-band radar band)
- Display appearance Series of about 12 equally spaced dots
- When it transmits replies After being placed ON , it responds when interrogated by a 9 GHz radar
- How to maximize range Hold / mount the SART as high as possible
- Audible tone purpose Informs survivors that assistance may be nearby
- Activation logic (easy to mix up with EPIRB)
Survivors switch the SART ON .
It does not need to “broadcast forever into empty ocean” like a free-running voice MAYDAY.
When a searching ship’s X-band radar illuminates it, the SART replies .
On the radar PPI, rescuers see roughly twelve dots lined up on the bearing to the SART; as range closes, dots become arcs/circles (advanced display detail useful for understanding, even if Element 1 mainly wants “12 dots”).
The SART’s beep/alarm tells people in the raft that a radar (possible rescue) is nearby.
Range discipline
Microwave SART paths are essentially line-of-sight . Height wins:
- Hold the unit high on a pole or have a survivor raise it
- Do not count on “high power switch” myths—SARTs are not bridged VHF radios with a 1 W / 25 W toggle
Do not mount it horizontal “to match radar polarization” as a pool-style correct answer—the tested range maximizer is height
- EPIRB — Emergency Position Indicating Radio Beacon
- Definition
An EPIRB is a battery-operated emergency position-indicating radio beacon that can float free of a sinking ship, turn on (automatically for float-free Category I-style installations), and transmit a distress signal for satellite detection.
If a ship sinks, what device is designed to float free, activate, and transmit distress? → An EPIRB (emergency position indicating radio beacon).
COSPAS-SARSAT and 406 MHz
- Term Meaning for Element 1
- COSPAS-SARSAT An international satellite-based search and rescue system
- 406 MHz satellite EPIRB Digital distress beacon compatible with COSPAS-SARSAT and GMDSS concepts
Advantages of 406 MHz EPIRB Compatible with COSPAS-SARSAT/GMDSS; supports fast accurate SAR response; carries a digitally encoded identity (ship identity/nationality concepts)—pool often wants all of the above
Many units also radiate a 121.5 MHz homing signal for local aircraft/ship direction-finding, but the satellite alerting story Element 1 emphasizes is the 406 MHz COSPAS-SARSAT path—not “any frequency” and not classic 2182 kHz EPIRB distractors.
Float-free vs manual concepts (operator level)
Float-free / automatic release installations are designed so that if the ship sinks, the EPIRB leaves its bracket, reaches the surface, and activates.
Manual activation is still critical if you abandon ship before sinking, or if the hydrostatic release fails.
Element 1’s “float free + automatic + distress signal” stem points to the EPIRB , not the bridge-to-bridge radio and not an “auto alarm keyer on any frequency.”
Batteries and false alerts
Topic Rule of thumb on the exam
When are EPIRB batteries changed? After emergency use , or within the month and year replacement date printed on the EPIRB —whichever applies
- False EPIRB activation Notify the Coast Guard or rescue coordination center at once
- Why not “just turn it off and hope”? Satellites and RCC workflows may already be treating the alert as real
False EPIRB cancellation is not the same procedure as cancelling a false VHF DSC alert with a Channel 16 “all stations” voice message. For EPIRB, Element 1 wants immediate RCC / Coast Guard notification .
Testing without creating a real SAR scramble
Use the manufacturer’s self-test function (often a dedicated test position or button sequence).
Do not deliberately activate a live distress transmission “to see if satellites hear you.”
Log required EPIRB tests/inspections (monthly self-test language is common in marine inspection practice and related log topics).
After any real activation, plan on battery replacement and any required servicing before the next voyage.
How the Three Devices Fit GMDSS Sea Areas (High Level)
Element 1 is not a full GMDSS Radio Operator exam, but you should see the layers :
- Layer Device Who it primarily alerts
- Local voice Survival-craft VHF on Ch-16 Nearby ships, rescue craft, coast stations in VHF range
- Local radar home SART on 9 GHz Ships searching with X-band radar
- Global / shore SAR system 406 MHz EPIRB via COSPAS-SARSAT Rescue coordination centers and coordinated SAR
Sea-area intuition (Element 1 level):
A1 (VHF DSC coast coverage): shipboard VHF-DSC is primary near shore; survival VHF still matters after abandon-ship.
A2/A3/A4 concepts push MF/HF, satellite, and redundancy—but EPIRB + SART + portable VHF remain the abandon-ship package across sea areas.
Decision Map for Subelement D Survival Gear
- Situation Tool
- Need to talk to a ship you can see Portable VHF , Ch-16
- Need radar ships to home on your raft SART ON , held high
- Ship sinking / need shore SAR system alert even if no one is nearby EPIRB (float-free / manual as designed)
- Accidentally activated EPIRB Call Coast Guard / RCC immediately to cancel
- Battery past printed date or after distress use Replace before relying on the beacon
Know the three devices by frequency family , who they alert , and how you test them without lying to the SAR system —that is the heart of Element 1 Subelement D survival equipment.