Study guide

5.5 Survival Craft Portable VHF (SCT) Requirements

FCC General Radiotelephone Operator License GROL

Track your progress as you read

Finished sections get a check mark.

1 Introduction & GROL Exam Overview

1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process

2 Element 1: Rules & Regulations

2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules

3 Element 1: Communications Procedures

3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities

4 Element 1: Equipment Operations

4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure

5 Element 1: Other Equipment & Antennas

5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information

6 Element 3: Electrical Principles

6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer

7 Element 3: Electrical Math

7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance

8 Element 3: Circuit Components — Passives & Power Devices

8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs

9 Element 3: Active Components — Transistors & Devices

9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design

10 Element 3: Practical Circuits — RLC, Op Amps & Schematics

10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow

11 Element 3: Digital Logic

11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters

12 Element 3: Receivers

12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth

13 Element 3: Transmitters

13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology

14 Element 3: Signals, Emissions & Modulation

14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types

15 Element 3: Power Sources

15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies

16 Element 3: Antennas & Feed Lines

16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth

17 Element 3 Background: Propagation & Radio Practice

17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering

18 Element 3: Aircraft Radio Navigation Systems

18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions

19 Element 3: Installation, Maintenance & Repair

19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis

20 Element 3: Communications Technology & Marine Systems

20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks

21 Element 3: RADAR & Satellite Systems

21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS

22 Element 3: RF & Electrical Safety

22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians

23 Study Strategy & Exam Day

23.1 Study Strategy, Practice Plan & Exam Day

5.5 Survival Craft Portable VHF (SCT) Requirements

Key Takeaways Explain This Topic AI

Survival craft portable two-way VHF equipment must be capable of operation on Channel 16 and must support simplex voice communications

Operation on Channel 13 is NOT a required survival-craft portable VHF capability - Channel 13 is the ship's bridge-to-bridge navigational channel

The equipment must be watertight and must have a permanently affixed, non-removable antenna

The minimum transmitter power of a survival craft transceiver is one watt

Portable survival craft transceivers may communicate between survival craft, between survival craft and ship, and between survival craft and rescue units

Last updated: August 2026

5.5 Survival Craft Portable VHF (SCT) Requirements

Quick Answer: A survival craft transceiver must work on Ch-16 , be simplex voice , be watertight , have a permanently affixed antenna , and have one watt minimum transmitter power. It may talk survival craft to survival craft, to ship, and to rescue unit . Two traps: Ch-13 is NOT required , and it does not operate simplex on Ch-70 .

Official sub-topic 1-D-23 (Survival Craft VHF) is unusual in the Element 1 pool because two of its six items are "which statement is NOT true" questions. That inverts the normal study approach: you must know the required characteristics and the plausible-sounding non-requirements the pool plants as answers.

The required characteristics

  • Requirement Detail
  • Channel 16 The set must be capable of operating on Ch-16—the distress, safety and calling channel
  • Simplex voice Simplex voice communications only; a survivor takes turns, there is no duplex
  • Watertight Classic performance figure: watertight to 1 metre for 5 minutes

Permanently affixed antenna Fixed and non-removable , so nothing can be lost overboard or fumbled with wet hands

  • Minimum power One watt minimum transmitter power for the SCT
  • Minimum ERP About 0.25 W effective radiated power appears in the performance language

Note the two power figures are different quantities and the pool uses both. One watt is the answer to "What is the minimum power of the SCT?" 0.25 W is an effective radiated power minimum stated in performance requirements. If a question says "minimum power of the SCT," answer one watt ; if it says "effective radiated power should be a minimum of…," that is the 0.25 W statement, and in the pool it appears as a true statement inside a NOT-true question.

Trap 1: Channel 13

"Which statement is NOT true regarding the requirements of survival craft portable two-way VHF radiotelephone equipment?" → "Operation on Ch-13."

Channel 13 is a genuinely important number (section 4.4)—it carries the required bridge-to-bridge navigational watch in most of the continental United States. That is exactly why it works as a distractor: candidates learn it as important and assume important means required everywhere.

Think about the use case. A survival craft handheld exists so survivors can talk to the ship they left, to other liferafts, and to arriving rescue units. Bridge-to-bridge navigational safety traffic between two ships under way has nothing to do with a liferaft. Ch-16 is required; Ch-13 is not.

  • Trap 2: simplex on Channel 70
  • The other NOT-true item keys to "Operates simplex on Ch-70 and at least one other channel."

This one is false for a reason worth understanding rather than memorising: Channel 70 carries no voice at all. It is reserved exclusively for digital selective calling (section 4.4). A "simplex voice on Ch-70" claim is self-contradictory. The distractors alongside it—watertight to 1 metre for 5 minutes, 0.25 W minimum ERP, fixed non-removable antenna—are all true requirements, which is what makes the item work.

Who may a survival craft transceiver talk to?

With what other stations may portable survival craft transceivers communicate? All of the above — that is:

  • Between survival craft — liferaft to liferaft, keeping a dispersed group coordinated
  • Between survival craft and ship — back to the parent vessel or to any assisting ship
  • Between survival craft and rescue unit — to the SAR vessel, helicopter or lifeboat

The inclusive answer is correct because restricting a survivor's radio to one counterparty would be indefensible. Watch for options that name only one or two of the three.

Two "all of these" items

Two pool items in this sub-topic key to an all-inclusive answer:

"Equipment for radiotelephony use in survival craft stations under GMDSS must have what characteristic(s)?" → operation on Ch-16, watertight, permanently affixed antenna — all of these

"With what other stations may portable survival craft transceivers communicate?" → all of the above

But a third, similar-looking item is not inclusive: "Equipment for radiotelephony use in survival craft stations under GMDSS must have what capability?" keys to operation on Ch-16 alone, with 457.525 MHz and 121.5 MHz offered as distractors and "any one of these" as the trap. Read whether the stem asks for a capability (single) or characteristics (plural) before reaching for the inclusive option.

Those two distractor frequencies are real but belong elsewhere: 457.525 MHz is in the on-board UHF communications band, and 121.5 MHz is the aeronautical emergency and legacy EPIRB homing frequency (sections 4.4, 5.2). Neither is a survival-craft VHF requirement.

Practical picture

A survival craft transceiver is deliberately the simplest radio on the ship: a few channels, a single power level or a high/low switch, no DSC, no scan lists, no removable parts. It is designed for a cold, wet, frightened person with poor fine motor control. Every requirement above traces back to that user—fixed antenna because things get dropped, watertight because everything is wet, Ch-16 because it is the one channel everyone monitors, simplex because push-to-talk is the simplest possible interface.