Study guide

2.5 Ship Station Control, Inspections & International Rules

FCC General Radiotelephone Operator License GROL

Track your progress as you read

Finished sections get a check mark.

1 Introduction & GROL Exam Overview

1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process

2 Element 1: Rules & Regulations

2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules

3 Element 1: Communications Procedures

3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities

4 Element 1: Equipment Operations

4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure

5 Element 1: Other Equipment & Antennas

5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information

6 Element 3: Electrical Principles

6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer

7 Element 3: Electrical Math

7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance

8 Element 3: Circuit Components — Passives & Power Devices

8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs

9 Element 3: Active Components — Transistors & Devices

9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design

10 Element 3: Practical Circuits — RLC, Op Amps & Schematics

10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow

11 Element 3: Digital Logic

11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters

12 Element 3: Receivers

12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth

13 Element 3: Transmitters

13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology

14 Element 3: Signals, Emissions & Modulation

14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types

15 Element 3: Power Sources

15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies

16 Element 3: Antennas & Feed Lines

16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth

17 Element 3 Background: Propagation & Radio Practice

17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering

18 Element 3: Aircraft Radio Navigation Systems

18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions

19 Element 3: Installation, Maintenance & Repair

19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis

20 Element 3: Communications Technology & Marine Systems

20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks

21 Element 3: RADAR & Satellite Systems

21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS

22 Element 3: RF & Electrical Safety

22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians

23 Study Strategy & Exam Day

23.1 Study Strategy, Practice Plan & Exam Day

2.5 Ship Station Control, Inspections & International Rules

Key Takeaways Explain This Topic AI

FCC-licensed ship stations in international waters are governed by Part 80 plus the international Radio Regulations and agreements to which the United States is a party

The master of the ship has ultimate control of service at a ship's radio station, above the licensed radio operator

An unlicensed person may speak over a ship transmitter only under the supervision of the licensed operator

Application for inspection of a ship GMDSS radio station goes to the Engineer-in-Charge of the nearest FCC District Office

The principal radiotelephone operating position must be in the room, or an adjoining room, from which the ship is normally steered at sea

Last updated: August 2026

2.5 Ship Station Control, Inspections & International Rules

Quick Answer: In international waters an FCC-licensed ship station obeys Part 80 plus the international Radio Regulations and US treaty agreements. The master of the ship has ultimate control of station service. An unlicensed person may speak only under the licensed operator's supervision . Inspections are requested from the Engineer-in-Charge of the nearest FCC District Office . The principal operating position goes in—or adjoining—the room the ship is normally steered from . By international agreement, cargo ships over 300 gross tons and vessels carrying more than 12 passengers must carry radio equipment.

Official sub-topic 1-A-06 (Miscellaneous Rules & Regulations) is the catch-all of the Rules & Regulations topic. Do not dismiss it as filler—it is worth one question on a 24-question element, exactly the same as every other sub-topic, and its six pool items are unusually quotable.

Which rules apply where

A US-flagged, FCC-licensed ship does not leave FCC jurisdiction when it leaves US waters. The governing answer is layered:

  • Layer What it is
  • 47 CFR Part 80 The FCC's own maritime service rules, which follow the licence

International Radio Regulations The ITU treaty instrument governing frequencies, distress procedure, and station identification worldwide

Agreements to which the US is a party SOLAS and related conventions the United States has adopted

So when the pool asks what governs FCC-licensed ship stations in international waters, the answer is not "Part 80 only" and not "the Radio Regulations only"—it is Part 80 plus the international Radio Regulations and the agreements to which the United States is a party. Answer options that name a single source are traps.

Who is actually in charge

This one surprises technically minded candidates: the master of the ship has ultimate control of service at a ship's radio station. Not the licensed radio operator, not the coast station, not the company. The operator holds the technical qualification and is responsible for correct operation; the master holds command.

The practical consequence appears in distress procedure. A distress alert is sent on the authority of the master or the person responsible for the mobile station —the same principle applies to urgency signals (see section 3.4). Radio authority sits inside the ship's command structure, not beside it.

When may an unlicensed person transmit?

Only under the supervision of the licensed operator. This is the third rail of ship-station operating rules, and every wrong option is a plausible-sounding relaxation:

  • ❌ "In an emergency only" — too narrow; supervision is the actual test
  • ❌ "Never under any circumstances" — too strict
  • ❌ "If the person holds any FCC licence" — an amateur licence conveys nothing here
  • ✅ "When under the supervision of the licensed operator"

The rule exists because ships routinely need the mate, the master, or a passenger with relevant information to speak on the radio. The licence covers responsibility for the station, not a monopoly on the microphone.

Where the operating position goes

The principal radiotelephone operating position must be installed in the room—or an adjoining room—from which the ship is normally steered while at sea. In plain terms: on or immediately next to the bridge.

The reasoning is watchkeeping. A bridge team maintaining a Channel 16 or DSC watch cannot do it from a compartment three decks down, and a distress alert has to be reachable in seconds by the person conning the vessel. Distractors offering the radio room "anywhere convenient," "adjacent to the engine room," or "in the master's cabin" all fail that test.

Requesting an inspection

Application for inspection of a ship GMDSS radio station is made to the Engineer-in-Charge of the FCC District Office nearest the proposed place of inspection. Note all three elements of that answer:

  • Engineer-in-Charge — a specific FCC title, not "the FCC" generally and not the Wireless Bureau in Washington
  • District Office — the field structure, not headquarters

Nearest the proposed place of inspection — geography follows the ship, not the ship's home port or the owner's address

Which ships must carry radio by international agreement

Cargo ships of more than 300 gross tons and vessels carrying more than 12 passengers.

Both halves matter, and the numbers are the classic swap targets:

  • Threshold Applies to
  • More than 300 gross tons Cargo ships
  • More than 12 passengers Any vessel, regardless of tonnage

The 300-gross-ton figure reappears in the GMDSS carriage question (section 3.5: GMDSS is required for SOLAS Convention ships of 300 gross tonnage or more ), so learning it once pays twice. Watch the wording though—one is "more than 300 gross tons" for cargo carriage generally, the other is "300 gross tonnage or more" for SOLAS GMDSS. The pool does not usually punish the boundary, but it does punish 100, 500, or 1,000.

Study pattern for this sub-topic

Every item here is a single quotable fact with a named authority attached . Drill them as a list of six, not as concepts to reason through:

  • International waters → Part 80 + Radio Regulations + US agreements
  • Ultimate control → the master
  • Unlicensed speaker → under the licensed operator's supervision
  • Inspection application → Engineer-in-Charge, nearest FCC District Office
  • Principal operating position → room the ship is normally steered from, or adjoining
  • International carriage → cargo >300 GT; any vessel >12 passengers