Study guide
20.4 Survival Craft Electronics, FAX & NAVTEX
FCC General Radiotelephone Operator License GROL
Track your progress as you read
Finished sections get a check mark.
1 Introduction & GROL Exam Overview
1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process
2 Element 1: Rules & Regulations
2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules
3 Element 1: Communications Procedures
3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities
4 Element 1: Equipment Operations
4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure
5 Element 1: Other Equipment & Antennas
5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information
6 Element 3: Electrical Principles
6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer
7 Element 3: Electrical Math
7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance
8 Element 3: Circuit Components — Passives & Power Devices
8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs
9 Element 3: Active Components — Transistors & Devices
9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design
10 Element 3: Practical Circuits — RLC, Op Amps & Schematics
10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow
11 Element 3: Digital Logic
11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters
12 Element 3: Receivers
12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth
13 Element 3: Transmitters
13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology
14 Element 3: Signals, Emissions & Modulation
14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types
15 Element 3: Power Sources
15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies
16 Element 3: Antennas & Feed Lines
16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth
17 Element 3 Background: Propagation & Radio Practice
17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering
18 Element 3: Aircraft Radio Navigation Systems
18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions
19 Element 3: Installation, Maintenance & Repair
19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis
20 Element 3: Communications Technology & Marine Systems
20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks
21 Element 3: RADAR & Satellite Systems
21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS
22 Element 3: RF & Electrical Safety
22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians
23 Study Strategy & Exam Day
23.1 Study Strategy, Practice Plan & Exam Day
20.4 Survival Craft Electronics, FAX & NAVTEX
Key Takeaways Explain This Topic AI
A SART, once activated, transmits replies when interrogated by 9 GHz X-band radar and appears as about 12 equally spaced dots on the rescuer’s radar display
A 406 MHz EPIRB is the primary GMDSS locating/alerting beacon path: it transmits a unique hexadecimal ID used to identify the vessel and support position determination via COSPAS-SARSAT
Facsimile is transmission of printed pictures for permanent paper display; HF weatherfax standard scan rate is 120 lines per minute with about 1 kHz (−6 dB) crystal filter bandwidth
NAVTEX receives MSI using SITOR-B/FEC on the international primary frequency 518 kHz; subject-indicator programming controls which message types print
NMEA 0183 is single-talker/multi-listener with shield grounded at the talker; NMEA 2000 is a bi-directional multi-talker network (LEN 1 = 50 mA; end-powered small systems; ≤1.5 V drop)
Last updated: August 2026
20.4 Survival Craft Electronics, NAVTEX & NMEA
Quick Answer: SART = 9 GHz , replies after ON when radar interrogates → ~12 dots . EPIRB = primary 406 MHz locating beacon with unique hex ID . Weatherfax = printed pictures; 120 lines/min ; filter ~1 kHz @ −6 dB . NAVTEX = MSI via SITOR-B/FEC on 518 kHz ; reject subjects by programming. NMEA 0183 shield grounds at talker ; NMEA 2000 = multi-talker network, LEN 1 = 50 mA , 1.5 V drop budget.
Key topics 087 (Survival Craft: VHF, SARTs & EPIRBs) , 088 (FAX, NAVTEX) , and 089 (NMEA Data) finish the marine technology cluster. When the ship is in distress—or when the bridge needs weather and position data—these systems are the technical backbone.
- SART — Search and Rescue Radar Transponder
- Activation and transmission logic
What causes the SART to begin a transmission? After being activated, the SART responds to RADAR interrogation. It is not a free-running always-on beacon the moment it is wet, and it is not “keyed like a microphone” for each reply. Survivors switch it ON ; 9 GHz X-band ship radars interrogate it; the SART replies .
- Fact Element 3 answer
- Frequency band 9 GHz (X-band navigational radar band)
- Display appearance Series of about 12 equally spaced dots
- When it radiates replies After activation, when interrogated by radar
- Not the band 406 MHz (that is EPIRB); 3 GHz S-band alone as the SART answer
- Homing picture
On the rescuer’s PPI, the line of dots points along the bearing to the survival craft. As range decreases, the presentation evolves (arcs/circles on many displays)—Element 3’s tested image remains twelve equally spaced dots . Hold/mount the SART high for line-of-sight microwave range (operational doctrine reinforced in Element 1).
EPIRB — primary locating signal source
Which GMDSS equipment is the primary source of transmitting locating signals?
An EPIRB transmitting on 406 MHz —not an RDF, not a “SART on 406 MHz,” and not the survival-craft VHF transceiver as the primary satellite locating answer.
- Layer Device Who it mainly alerts
- Local voice Survival-craft VHF (Ch-16) Nearby ships / SAR units
- Local radar home SART @ 9 GHz Ships with X-band radar
- Global SAR system 406 MHz EPIRB COSPAS-SARSAT → RCCs
- Coded identity and position support
True statement concerning satellite EPIRBs: Once activated, these EPIRBs transmit a signal for use in identifying the vessel and for determining the position of the beacon.
True statement regarding 406 MHz EPIRB transmissions: they transmit a unique hexadecimal identification number .
- Claim Verdict
- Unique hex ID on 406 MHz True
- Immediate voice with RCC via the EPIRB channel False as the 406 digital beacon function
- Operator programs an ID into a SART before activation False (confused systems)
- Coded signal “only” ship name/port Too narrow / wrong as the pool’s true statement
Maintainer tasks: register the beacon correctly, inspect hydrostatic release and battery dates, use self-test only, and after any real activation plan battery service. False alerts → notify Coast Guard / RCC immediately (Element 1 discipline still applies).
Facsimile (weatherfax)
What is facsimile?
Facsimile is the transmission of printed pictures for permanent display on paper —not slow-scan TV as the definition, not RTTY characters that “happen to look like a picture,” and not ordinary broadcast television.
HF weatherfax parameters
- Parameter Element 3 value
- Service HF weather facsimile from shore stations (~ 3–23 MHz context)
- Standard scan rate 120 lines per minute
- Good crystal lattice band-pass filter bandwidth 1 kHz at −6 dB
Install/repair notes:
Receiver bandwidth too wide → noisy gray images; too narrow → lost detail.
Wrong USB/LSB or BFO offset → black/white inversion or tearing.
Confirm schedule/frequency lists for the ocean area; the radio path is still ionospheric HF.
NAVTEX — MSI by narrow-band direct printing
NAVTEX delivers Maritime Safety Information (MSI) —navigational warnings, weather, and related safety text—to a dedicated receiver/printer or display.
Mode and frequency
- Fact Answer
- How MSI is received SITOR-B or FEC mode
- International primary frequency 518 kHz
- Not the primary international answer 2182 kHz SSB voice; VHF 16; ship transmitting on 518
- Not ARQ as the receive mode Ship does not use SITOR-A/ARQ as the NAVTEX receive description
NAVTEX is a receive service for the ship on 518 kHz (with other regional frequencies such as 490 kHz in broader practice). The vessel does not “answer” NAVTEX like an ARQ telex call.
Message filtering
What determines whether a NAVTEX receiver does not print a particular type of message content? The subject indicator matches that programmed for rejection by the operator.
Operators program which B1 transmitter IDs and B2 subject categories to accept or reject (always-print categories such as certain distress/navigational warnings may still force print depending on rules/equipment—Element 3’s tested mechanism is subject-indicator rejection programming ).
- Control Effect
- Subject indicator accepted Message types print
- Subject indicator rejected by operator program Those contents do not print
- “Message doesn’t concern your vessel” alone Not the pool’s technical mechanism
- NMEA data — interfacing GPS, radios, and instruments
Marine electronics share data over NMEA networks. Element 3 contrasts classic NMEA 0183 with modern NMEA 2000 and tests installation numbers maintainers must memorize.
NMEA 0183 vs NMEA 2000
- Feature NMEA 0183 NMEA 2000
- Topology idea Single talker , multiple listeners Bi-directional , multi-transmitter, multi-receiver network
- Electrical style Asynchronous serial sentences CAN-bus style backbone network
- Pool “bi-directional multi-talker” answer Not 0183 NMEA 2000
- Typical use GPS → VHF DSC, instruments Integrated bridge networks, multi-sensor sharing
- Shield grounding on NMEA 0183
How should shielding be grounded on an NMEA 0183 data line? Terminated to ground at the talker and unterminated at the listener. Grounding both ends invites ground loops; grounding only the listener is the wrong pool choice.
- End Shield
- Talker (e.g. GPS) Ground the shield
- Listener (e.g. VHF, plotter) Leave shield unterminated
- NMEA 2000 network behavior and power
- Topic Element 3 fact
- One device fails in line No interruption to all other devices (drop-line topology; backbone remains)
- LEN (Load Equivalence Number) of 1 50 mA current consumption
- Devices in a single location power method End-powered network acceptable
- Voltage drop at end of last segment (cabling plan) 1.5 volts satisfies the plan
LEN math: sum device LENs × 50 mA ≈ network load; size power feeds and backbone length so the end-of-line drop ≤ 1.5 V under load. Mid-powered or multiple power insertion points appear on large yachts—but the pool’s single-location method answer is end-powered .
GPS → radio path (ties §20.3)
A correct NMEA install is why the DSC VHF shows lat/long :
GNSS sensor talks 0183 sentences (e.g. RMC/GGA family) or N2K PGNs.
Wiring polarity and baud (commonly 4800 for classic 0183) must match.
Shield grounded at talker only for 0183.
Radio display confirms position before the ship sails.
Survival + MSI + data: one safety stack
- Need System
- Talk to a ship in sight after abandon-ship Survival-craft VHF
- Let radars home on the raft SART 9 GHz, 12 dots
- Alert shore SAR worldwide 406 MHz EPIRB hex ID
- Print weather maps HF weatherfax 120 LPM
- Auto-print coastal MSI text NAVTEX 518 kHz FEC
- Feed position into DSC/radios NMEA 0183 / 2000
- Exam-day checklist (3-N 087–089)
SART: activate → reply to radar ; band 9 GHz ; display 12 dots .
Primary locating transmitter: 406 MHz EPIRB ; unique hex ID ; signal supports ID + position determination.
Facsimile = printed pictures on paper ; weatherfax 120 LPM ; filter 1 kHz @ −6 dB .
NAVTEX: SITOR-B/FEC ; 518 kHz international; filter by subject indicator rejection.
Bi-directional multi-talker network language: NMEA 2000 (not 0183).
0183 shield: ground at talker , open at listener .
N2K: device failure doesn’t kill others; LEN 1 = 50 mA ; single-location end-powered ; 1.5 V drop budget.
Master the three survival layers, the two MSI receivers (fax + NAVTEX), and the NMEA install rules—and Topic 3-N (082–089 with 3-M) is complete for Element 3 marine communications technology. Radar and satellite systems continue in the following chapters.