Study guide
11.7 Memory Types & Microprocessor Concepts
FCC General Radiotelephone Operator License GROL
Track your progress as you read
Finished sections get a check mark.
1 Introduction & GROL Exam Overview
1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process
2 Element 1: Rules & Regulations
2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules
3 Element 1: Communications Procedures
3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities
4 Element 1: Equipment Operations
4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure
5 Element 1: Other Equipment & Antennas
5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information
6 Element 3: Electrical Principles
6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer
7 Element 3: Electrical Math
7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance
8 Element 3: Circuit Components — Passives & Power Devices
8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs
9 Element 3: Active Components — Transistors & Devices
9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design
10 Element 3: Practical Circuits — RLC, Op Amps & Schematics
10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow
11 Element 3: Digital Logic
11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters
12 Element 3: Receivers
12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth
13 Element 3: Transmitters
13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology
14 Element 3: Signals, Emissions & Modulation
14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types
15 Element 3: Power Sources
15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies
16 Element 3: Antennas & Feed Lines
16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth
17 Element 3 Background: Propagation & Radio Practice
17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering
18 Element 3: Aircraft Radio Navigation Systems
18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions
19 Element 3: Installation, Maintenance & Repair
19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis
20 Element 3: Communications Technology & Marine Systems
20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks
21 Element 3: RADAR & Satellite Systems
21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS
22 Element 3: RF & Electrical Safety
22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians
23 Study Strategy & Exam Day
23.1 Study Strategy, Practice Plan & Exam Day
11.7 Memory Types & Microprocessor Concepts
Key Takeaways Explain This Topic AI
RAM is random-access memory whose data can be written or read and whose word address can be accessed randomly
ROM is read-only memory holding a fixed pattern of digital data in its memory matrix
DRAM is the random-access memory that must be refreshed periodically to maintain reliable storage
A memory IC with 4 address pins and 4 data pins contains 64 individual cells - 2 to the 4th addresses times 4 bits
In a microprocessor system IO means input-output, and the sequence of commands and instructions is called the program
Last updated: August 2026
11.7 Memory Types & Microprocessor Concepts
Quick Answer: RAM = written or read, address accessed randomly. ROM = fixed pattern stored in the matrix. DRAM = the RAM that must be refreshed periodically . 4 address pins × 4 data pins = 2⁴ × 4 = 64 cells. IO = input-output. A microprocessor's sequence of commands and instructions is a program .
Sub-topic 3-E-038 (Memory) is vocabulary plus one calculation. The vocabulary is standard but the pool words its questions in a distinctive way, so match the phrasing.
The three memory types the pool names
Type Pool's defining phrase Volatile? Refresh needed?
RAM — Random-Access Memory "digital data can be written or read , and whose memory word address can be accessed randomly " Yes Depends on type
- ROM — Read-Only Memory "has a fixed pattern of digital data stored in its memory matrix " No No
- DRAM — Dynamic Random-Access Memory "must be refreshed periodically to maintain reliable data storage" Yes Yes
- What "random access" actually means
It does not mean the data is random, and it does not mean access is unpredictable. It means any address can be reached directly, in the same time as any other — as opposed to sequential access, where you must pass through everything in between (magnetic tape being the classic counter-example). Both RAM and ROM are random-access in that sense; "RAM" simply became the name that stuck for the writable kind.
Why DRAM needs refreshing
DRAM stores each bit as a charge on a tiny capacitor . Capacitors leak. Left alone, the charge decays and the bit is lost within milliseconds, so a refresh cycle reads and rewrites every row on a repeating schedule.
The trade is deliberate: one transistor and one capacitor per DRAM cell against four to six transistors per SRAM (static RAM) cell. DRAM is therefore far denser and cheaper per bit, at the cost of refresh circuitry and access complexity. SRAM holds its data as long as power is applied and needs no refresh, so it is used where speed matters most — cache and small buffers.
When the pool asks which random-access memory must be refreshed, the answer is DRAM, not RAM generally and not SRAM.
The cell-count calculation
How many individual memory cells would be contained in a memory IC that has 4 data bus input/output pins and 4 address pins for connection to the address bus? 64.
Work it in two steps:
Address pins set the number of locations. n address pins address 2ⁿ locations. With 4 address pins: 2⁴ = 16 locations .
Data pins set the width of each location. 4 data pins means each location holds 4 bits .
Total cells = locations × width = 16 × 4 = 64 .
- Address pins Locations (2ⁿ) × 4-bit width Total cells
- 2 4 4 16
- 3 8 4 32
- 4 16 4 64
- 8 256 4 1,024
- 10 1,024 4 4,096
The trap is answering 16 (locations only) or 8 (simply adding the pins). The question asks for individual memory cells , and a cell holds one bit. Note how steeply this scales: every extra address pin doubles the capacity, which is why ten address lines already reach 1K locations.
Microprocessor vocabulary
What does the term "IO" mean within a microprocessor system? Input-output.
I/O is everything the processor uses to reach the world beyond its own bus — ports, UARTs, ADCs and DACs (section 11.8), display drivers, keypads. In a radio, the I/O is what connects the microprocessor to the synthesiser, the display, the front-panel controls and the DSC controller.
What is the name for a microprocessor's sequence of commands and instructions? A program.
Plain, and the pool means the plain answer. Related vocabulary worth holding:
- Term Meaning
- Program The sequence of commands and instructions — the pool's answer
- Firmware A program stored in ROM or flash, shipped as part of the hardware
- Instruction set The repertoire of operations a given processor understands
- Bus The shared parallel paths: address bus selects, data bus carries, control bus sequences
- Why a radio technician cares
Every modern transceiver on a GROL technician's bench is a microprocessor system. The ROM or flash holds the firmware; RAM holds working values, scan lists and channel memories; the address and data buses connect them; and the I/O reaches the synthesiser, the display, and the DSC controller. When a set powers up dead, loses its channel memories, or corrupts its display, you are looking at exactly these blocks — which is why the pool puts memory vocabulary in a licence exam for radio maintainers rather than in a computing exam.