Study guide
7.5 Frequency Counter Accuracy, PPM & Harmonics
FCC General Radiotelephone Operator License GROL
Track your progress as you read
Finished sections get a check mark.
1 Introduction & GROL Exam Overview
1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process
2 Element 1: Rules & Regulations
2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules
3 Element 1: Communications Procedures
3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities
4 Element 1: Equipment Operations
4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure
5 Element 1: Other Equipment & Antennas
5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information
6 Element 3: Electrical Principles
6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer
7 Element 3: Electrical Math
7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance
8 Element 3: Circuit Components — Passives & Power Devices
8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs
9 Element 3: Active Components — Transistors & Devices
9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design
10 Element 3: Practical Circuits — RLC, Op Amps & Schematics
10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow
11 Element 3: Digital Logic
11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters
12 Element 3: Receivers
12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth
13 Element 3: Transmitters
13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology
14 Element 3: Signals, Emissions & Modulation
14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types
15 Element 3: Power Sources
15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies
16 Element 3: Antennas & Feed Lines
16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth
17 Element 3 Background: Propagation & Radio Practice
17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering
18 Element 3: Aircraft Radio Navigation Systems
18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions
19 Element 3: Installation, Maintenance & Repair
19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis
20 Element 3: Communications Technology & Marine Systems
20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks
21 Element 3: RADAR & Satellite Systems
21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS
22 Element 3: RF & Electrical Safety
22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians
23 Study Strategy & Exam Day
23.1 Study Strategy, Practice Plan & Exam Day
7.5 Frequency Counter Accuracy, PPM & Harmonics
Key Takeaways Explain This Topic AI
Maximum frequency error equals the indicated frequency multiplied by the time-base accuracy expressed in parts per million
A counter reading 462,100,000 Hz with a time base accurate to plus or minus 1.0 ppm may be off by 462.1 Hz
The same counter at plus or minus 0.1 ppm may be off by 46.21 Hz, and at plus or minus 10 ppm by 1,565.20 Hz on 156.52 MHz
Parts per million means multiply by ten to the minus six - one ppm of 1 MHz is exactly 1 Hz
The second harmonic is simply twice the fundamental: the second harmonic of 380 kHz is 760 kHz and of 4146 kHz is 8292 kHz
Last updated: August 2026
7.5 Frequency Counter Accuracy, PPM & Harmonics
Quick Answer: Error (Hz) = indicated frequency (Hz) × ppm × 10⁻⁶. So 462.1 MHz at ±1.0 ppm → 462.1 Hz ; at ±0.1 ppm → 46.21 Hz . 156.52 MHz at ±1.0 ppm → 156.52 Hz ; at ±10 ppm → 1565.20 Hz . Second harmonic = 2 × fundamental : 380 kHz → 760 kHz ; 4146 kHz → 8292 kHz .
Sub-topic 3-B-011 (Frequency) is the highest-value single sub-topic in the electrical-math topic for the effort involved. Four of its six pool items are the same calculation with different numbers, and the remaining two are the easiest arithmetic in Element 3.
What a time-base accuracy actually means
A frequency counter measures by counting cycles over a precisely known interval. That interval comes from an internal crystal oscillator—the time base . If the time base is slightly off, the count is proportionally off. So the counter's accuracy specification is a fractional figure, given in parts per million (ppm) .
Parts per million means exactly what it says: multiply by 10⁻⁶.
- Notation Multiplier
- 1 ppm 1 × 10⁻⁶ = 0.000001
- 0.1 ppm 1 × 10⁻⁷
- 10 ppm 1 × 10⁻⁵
A convenient anchor: 1 ppm of 1 MHz is exactly 1 Hz. Every question in this sub-topic can be scaled from that single fact.
- The formula and the four worked pool items
- Maximum error (Hz) = indicated frequency (Hz) × ppm ÷ 1,000,000
- Reading Time-base accuracy Working Maximum error
- 462,100,000 Hz ± 0.1 ppm 462.1 × 10⁶ × 1 × 10⁻⁷ 46.21 Hz
- 462,100,000 Hz ± 1.0 ppm 462.1 × 10⁶ × 1 × 10⁻⁶ 462.1 Hz
- 156,520,000 Hz ± 1.0 ppm 156.52 × 10⁶ × 1 × 10⁻⁶ 156.52 Hz
- 156,520,000 Hz ± 10 ppm 156.52 × 10⁶ × 1 × 10⁻⁵ 1565.20 Hz
- The shortcut worth learning
Notice the pattern in the middle two rows. At 1.0 ppm , the error in hertz is numerically the frequency expressed in megahertz :
- 462.1 MHz at 1 ppm → 462.1 Hz
- 156.52 MHz at 1 ppm → 156.52 Hz
That is not a coincidence—it falls straight out of 1 ppm of 1 MHz = 1 Hz. Once you see it, the whole sub-topic collapses to: write the frequency in MHz, then scale by the ppm figure.
- ±0.1 ppm → move the decimal one place left : 462.1 → 46.21 Hz
- ±1.0 ppm → the number unchanged : 156.52 → 156.52 Hz
- ±10 ppm → move the decimal one place right : 156.52 → 1565.2 Hz
Three decimal-point moves cover four of the six items in this sub-topic.
Why this matters on the bench
The practical reading of these numbers is: your measurement is only as good as your reference. Two consequences:
A counter cannot verify a tolerance tighter than its own time base. If a Part 80 or Part 87 station must hold ±0.0005% (5 ppm) and your counter is ±10 ppm, the instrument cannot prove compliance. You need a counter an order of magnitude better than the tolerance you are checking, or an external reference (a GPS-disciplined oscillator or a rubidium standard).
Time-base error scales with frequency. The same ±1 ppm counter is off by 2 Hz at 2 MHz and by 462 Hz at 462 MHz. Errors that are invisible on MF become significant at UHF, which is exactly why the pool's examples use marine VHF (156.52 MHz) and land-mobile UHF (462.1 MHz).
Note also that these are ± figures , so the true frequency lies anywhere in a window twice the stated error wide. The pool asks "the most the actual frequency could differ," which is the one-sided value—do not double it.
Harmonics
The other two items in this sub-topic are trivial once you know the definition. A harmonic is an integer multiple of the fundamental:
- Harmonic Multiplier Example on 380 kHz Example on 4146 kHz
- Fundamental (1st) × 1 380 kHz 4146 kHz
- Second × 2 760 kHz 8292 kHz
- Third × 3 1140 kHz 12,438 kHz
- Fourth × 4 1520 kHz 16,584 kHz
The second harmonic of a 380 kHz frequency is 760 kHz. The second harmonic of SSB frequency 4146 kHz is 8292 kHz.
The one trap: the second harmonic is twice the fundamental, not three times. Counting confusion arises because the fundamental is itself the first harmonic, so the "second" is the first additional one. If an option offers 1140 kHz for the second harmonic of 380 kHz, it has counted the fundamental as harmonic zero.
Harmonics matter operationally because a transmitter's output stage is non-linear and always generates them. Harmonic suppression—through low-pass filtering, tuned tank circuits, and push-pull configurations that cancel even harmonics—is what keeps a station legal. Note that 4146 kHz is a real marine HF working frequency, and its second harmonic at 8292 kHz lands in the 8 MHz marine band, so unsuppressed harmonics from one marine transmitter interfere directly with another marine service.