Study guide

19.5 Frequency Standards, SINAD Meters & EMI Hunting

FCC General Radiotelephone Operator License GROL

Track your progress as you read

Finished sections get a check mark.

1 Introduction & GROL Exam Overview

1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process

2 Element 1: Rules & Regulations

2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules

3 Element 1: Communications Procedures

3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities

4 Element 1: Equipment Operations

4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure

5 Element 1: Other Equipment & Antennas

5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information

6 Element 3: Electrical Principles

6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer

7 Element 3: Electrical Math

7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance

8 Element 3: Circuit Components — Passives & Power Devices

8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs

9 Element 3: Active Components — Transistors & Devices

9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design

10 Element 3: Practical Circuits — RLC, Op Amps & Schematics

10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow

11 Element 3: Digital Logic

11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters

12 Element 3: Receivers

12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth

13 Element 3: Transmitters

13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology

14 Element 3: Signals, Emissions & Modulation

14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types

15 Element 3: Power Sources

15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies

16 Element 3: Antennas & Feed Lines

16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth

17 Element 3 Background: Propagation & Radio Practice

17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering

18 Element 3: Aircraft Radio Navigation Systems

18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions

19 Element 3: Installation, Maintenance & Repair

19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis

20 Element 3: Communications Technology & Marine Systems

20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks

21 Element 3: RADAR & Satellite Systems

21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS

22 Element 3: RF & Electrical Safety

22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians

23 Study Strategy & Exam Day

23.1 Study Strategy, Practice Plan & Exam Day

19.5 Frequency Standards, SINAD Meters & EMI Hunting

Key Takeaways Explain This Topic AI

A frequency counter measures the time between events, or the frequency, which is the reciprocal of that time

A frequency standard is a device used to produce a highly accurate reference frequency, and the rubidium standard is the field technician's time-base standard

A SINAD meter combines a multirange AF voltmeter calibrated in dB with a sharp internal 1000 Hz bandstop filter to perform quieting tests

A portable AM receiver is the useful tool for tracking down EMI aboard a ship or aircraft

An analog wattmeter is accurate only at full scale, and that absolute error carries across the range - only the upper third of the scale is truly calibrated

Last updated: August 2026

19.5 Frequency Standards, SINAD Meters & EMI Hunting

Quick Answer: A counter measures the time between events, or the frequency, which is the reciprocal of the time . A frequency standard produces a highly accurate reference frequency ; field technicians use a rubidium standard . A SINAD meter = multirange AF voltmeter in dB + sharp internal 1000 Hz bandstop filter . Hunt EMI with a portable AM receiver . An analog wattmeter is calibrated only at full scale — the upper 1/3 is the trustworthy part.

Sub-topic 3-L-075 (Test Equipment) is about choosing the right instrument , which is exactly the judgement an FCC-licensed maintainer is expected to have.

How a frequency counter works

How is a frequency counter used? To measure the time between events, or the frequency, which is the reciprocal of the time.

The answer states the duality precisely. f = 1/T , so an instrument that can measure an interval can report a frequency, and vice versa. In frequency mode the counter opens a gate for a precise interval and counts cycles; in period mode it counts reference-clock ticks between two edges of the input.

Period mode matters practically: at low frequencies, counting cycles in a one-second gate gives terrible resolution (a 10 Hz signal yields "10", with a resolution of 10%). Measuring the period instead and inverting gives many more significant digits. Good counters switch automatically.

Frequency standards

What is a frequency standard? A device used to produce a highly accurate reference frequency.

Which frequency standard is used as a time base standard by field technicians? A rubidium standard.

  • Standard Typical stability Where used
  • Ordinary crystal oscillator 10–100 ppm Consumer gear
  • TCXO (temperature-compensated) ~1 ppm Better counters
  • OCXO (oven-controlled) ~0.01 ppm Lab-grade counters
  • Rubidium ~0.001 ppm and better The field technician's standard — the pool's answer
  • Caesium Best of all National metrology labs

Section 7.5 established that a counter can never verify a tolerance tighter than its own time base. A rubidium standard is the practical resolution to that problem: portable, warms up in minutes, and holds accuracy orders of magnitude better than the frequency tolerances in Parts 80 and 87. GPS-disciplined oscillators serve the same purpose in modern practice, but the pool's keyed answer is rubidium .

The SINAD meter

Which of the following contains a multirange AF voltmeter calibrated in dB and a sharp, internal 1000 Hz bandstop filter, both used in conjunction with each other to perform quieting tests? A SINAD meter.

SINAD stands for S ignal, N oise A nd D istortion — the ratio of everything at the audio output to everything except the wanted tone.

The measurement procedure explains the instrument's construction:

Feed the receiver an RF signal modulated with a 1000 Hz tone.

Measure the total audio output on the dB-calibrated AF voltmeter — that is signal + noise + distortion.

Switch in the 1000 Hz bandstop (notch) filter , removing the wanted tone.

Measure again — that is noise + distortion alone.

The difference in dB is the SINAD ratio.

Reduce the RF input until SINAD falls to 12 dB , and the RF level required is the receiver's standard sensitivity figure — the "12 dB SINAD" number quoted on every commercial receiver spec sheet (section 12.4). The two elements in the pool's question, the dB voltmeter and the 1000 Hz notch , are precisely the two things this procedure needs.

Hunting EMI

What equipment may be useful to track down EMI aboard a ship or aircraft? A portable AM receiver.

Counter-intuitive if you expect a spectrum analyser, and correct for a practical reason: AM detection is envelope detection , so it renders broadband noise audible . An arcing brush, a failing switching supply, a corroded bonding strap, a fluorescent ballast — each has a characteristic sound, and an experienced technician identifies the source by ear while walking the space with the receiver's own antenna as a direction finder.

An FM receiver would be poor at this: the capture effect and limiting deliberately suppress amplitude variation, which is exactly the information you need. That is why the answer is specifically a portable AM receiver , not just any handheld.

The analog wattmeter trap

On an analog wattmeter, what part of the scale is most accurate and how much does that accuracy extend to the rest of the reading scale? The accuracy is only at full scale, and that absolute number reading is carried through to the rest of the range. The upper 1/3 of the meter is the only truly calibrated part.

This is the sharpest practical trap in the sub-topic. An analog meter's accuracy is specified as a percentage of full scale , not a percentage of reading — so the absolute error is constant across the dial:

  • Range Reading Absolute error (±5% of full scale) Error as % of reading
  • 100 W FS 100 W ±5 W ±5%
  • 100 W FS 50 W ±5 W ±10%
  • 100 W FS 20 W ±5 W ±25%
  • 100 W FS 10 W ±5 W ±50%

At the bottom of the scale the reading is nearly meaningless. The professional habit follows directly: choose a range that puts the reading in the upper third of the scale , and if a 25-watt transmitter reads near the left-hand stop on a 250-watt slug, fit the right slug before you record the number. The same logic applies to analog VOMs and to directional wattmeters with interchangeable elements.