Study guide

21.4 INMARSAT Satellite Communications

FCC General Radiotelephone Operator License GROL

Track your progress as you read

Finished sections get a check mark.

1 Introduction & GROL Exam Overview

1.1 About the General Radiotelephone Operator License 1.2 Exam Format, COLEMs, FRN & Application Process

2 Element 1: Rules & Regulations

2.1 Equipment Requirements (Part 80) 2.2 License Requirements & Operator Authority 2.3 Watchkeeping & Logkeeping Duties 2.4 Log Entries & Required Records 2.5 Ship Station Control, Inspections & International Rules

3 Element 1: Communications Procedures

3.1 Bridge-to-Bridge Operations & VTS 3.2 Distress Communications & Alerting 3.3 Operating Procedures, Calling & Testing 3.4 Urgency (PAN PAN) & Safety (SECURITE) Traffic 3.5 The GMDSS Concept & Ship Responsibilities

4 Element 1: Equipment Operations

4.1 VHF Equipment Controls 4.2 MF/HF SSB Equipment Controls 4.3 DSC Operations & Equipment Faults 4.4 VHF Channel Selection & Channel Assignments 4.5 MF/HF Frequency & Emission Selection 4.6 Required Equipment Tests & On-Air Test Procedure

5 Element 1: Other Equipment & Antennas

5.1 Marine Antennas & Polarization 5.2 EPIRBs & Emergency Beacons 5.3 Power Sources, Reserve Power & Required Tests 5.4 Search and Rescue Transponders (SARTs) 5.5 Survival Craft Portable VHF (SCT) Requirements 5.6 NAVTEX & Maritime Safety Information

6 Element 3: Electrical Principles

6.1 Electrical Elements, Units & Power Types 6.2 Magnetism & Magnetic Circuits 6.3 Resistance, Capacitance & Inductance 6.4 Waveforms & Semiconductor Introduction 6.5 Materials, Corrosion & Skin Effect 6.6 AC Measurement & Conversion Factors 6.7 Conduction, Reactive Power & Maximum Power Transfer

7 Element 3: Electrical Math

7.1 Ohm's Law — Series & Parallel Circuits 7.2 Frequency, Period, Wavelength & Waveform Math 7.3 Power Relationships & Decibels 7.4 RC/RL Time Constants 7.5 Frequency Counter Accuracy, PPM & Harmonics 7.6 Impedance in Rectangular & Polar Coordinates 7.7 Regulation, Turns Ratio, Zener Bias & Conductance

8 Element 3: Circuit Components — Passives & Power Devices

8.1 Capacitors & Photoconductive Devices 8.2 Transformers, Voltage Regulators & Zener Diodes 8.3 Diodes, SCRs & Triacs

9 Element 3: Active Components — Transistors & Devices

9.1 Bipolar Junction Transistors 9.2 FETs, LEDs & Specialty Devices 9.3 Device Selection, Ratings & Thermal Design

10 Element 3: Practical Circuits — RLC, Op Amps & Schematics

10.1 R-L-C Resonant Circuits 10.2 Op Amps, PLLs, VCOs & Mixers 10.3 Reading Schematics & Signal Flow

11 Element 3: Digital Logic

11.1 Logic Gates & Boolean Functions 11.2 Flip-Flops & Sequential Elements 11.3 Multivibrators & Timing Circuits 11.4 Microprocessors & Bus Architecture 11.5 TTL Logic Families & Input Voltage Levels 11.6 Positive & Negative Logic and Truth Tables 11.7 Memory Types & Microprocessor Concepts 11.8 Counters, Prescalers, BCD & Data Converters

12 Element 3: Receivers

12.1 Receiver Theory & Superheterodyne Architecture 12.2 RF Amplifiers & Front-End Design 12.3 Filters & Detectors 12.4 Audio, Squelch & Receiver Performance Specs 12.5 Receiver Oscillators: Colpitts, Hartley & Pierce 12.6 Mixing, Image Frequencies & Spurious Products 12.7 IF Selectivity & Filter Bandwidth

13 Element 3: Transmitters

13.1 RF Amplifier Classes & Efficiency 13.2 Oscillators, Modulators & Tuning Networks 13.3 SSB Transmitters & Modern Transmitter Technology

14 Element 3: Signals, Emissions & Modulation

14.1 Amplitude & Frequency Modulation 14.2 Single-Sideband Modulation 14.3 Pulse Modulation & Emission Types

15 Element 3: Power Sources

15.1 Batteries & Energy Storage 15.2 Motors, Generators & Power Supplies

16 Element 3: Antennas & Feed Lines

16.1 Antenna Theory, Types & Patterns 16.2 Voltage, Current & Impedance on Antennas 16.3 Transmission Lines, Velocity Factor & SWR 16.4 Effective Radiated Power & Antenna Bandwidth

17 Element 3 Background: Propagation & Radio Practice

17.1 Radio Wave Propagation Modes 17.2 Multipath, Fading & Doppler Effects 17.3 Radio Practice, Interference & Good Engineering

18 Element 3: Aircraft Radio Navigation Systems

18.1 DME & VOR 18.2 ILS, ADF & ATC Transponders 18.3 Aircraft Antennas, Frequencies & Equipment Functions

19 Element 3: Installation, Maintenance & Repair

19.1 Indicating Meters & Meter Movements 19.2 Oscilloscopes & Waveform Measurement 19.3 Measurement Procedures 19.4 Installation Codes & Bonding Procedures 19.5 Frequency Standards, SINAD Meters & EMI Hunting 19.6 Spectrum Analyzers, TDRs & Service Monitors 19.7 Bench Repair Practices, ESD & Rework Tools 19.8 Systematic Troubleshooting & Field Fault Diagnosis

20 Element 3: Communications Technology & Marine Systems

20.1 Transmission Types, Coding & Multiplexing 20.2 Signal Processing, Software & Codes 20.3 Marine VHF, MF/HF & SSB-SITOR 20.4 Survival Craft Electronics, FAX & NAVTEX 20.5 NMEA 0183 & NMEA 2000 Data Networks

21 Element 3: RADAR & Satellite Systems

21.1 RADAR Theory & Pulse Fundamentals 21.2 Range, Pulse Width & PRF 21.3 Radar Antennas & Waveguides 21.4 INMARSAT Satellite Communications 21.5 RADAR Components: Magnetron, Duplexer, ATR & Synchro 21.6 RADAR Equipment, ARPA & Radiation Safety 21.7 Low Earth Orbit Systems: Iridium & COSPAS-SARSAT 21.8 GPS Satellite Navigation & DGPS

22 Element 3: RF & Electrical Safety

22.1 RF Radiation Exposure Limits 22.2 Electrical Safety Practices for Radio Technicians

23 Study Strategy & Exam Day

23.1 Study Strategy, Practice Plan & Exam Day

21.4 INMARSAT Satellite Communications

Key Takeaways Explain This Topic AI

LEO systems (e.g., Iridium ~485 mi altitude, ~85 min period, 1616–1626 MHz) provide near-global handheld voice/data; COSPAS-SARSAT monitors 406 MHz EPIRBs and locates many beacons via Doppler

INMARSAT maritime satellites are geostationary at about 22,177 miles with ocean-region footprints (AOR-E/W, POR, IOR) covering nearly all navigable waters

INMARSAT-C is a store-and-forward messaging system with a small omnidirectional SES antenna; INMARSAT-B uses larger directional antennas and supports voice/fax/high-speed data

GPS uses about 24 satellites in six planes inclined ~55°, transmits on 1575.4 MHz (L1) and 1227.6 MHz (L2), and needs four satellites for full 3-D position and time

DGPS supplies additional correction factors to improve position accuracy; GMDSS satellite distress paths include INMARSAT SES distress alerts and COSPAS-SARSAT 406 MHz beacons

Last updated: August 2026

21.4 Satellite Communications, INMARSAT & GPS

Quick Answer: LEO (Iridium ~485 mi , ~85 min orbits, 1616–1626 MHz ) = moving birds, handheld global voice/data. COSPAS-SARSAT listens on 406 MHz and often fixes position by Doppler . INMARSAT = GEO ~22,177 mi maritime satcom (ocean regions AOR-E/W, POR, IOR ). GPS = ~24 MEO sats, L1 1575.4 / L2 1227.6 MHz , 4 sats for full position + time; DGPS adds corrections.

Topic 3-P (Satellite) closes the Element 3 systems block with the space segment GROL techs meet on ships, aircraft, and distress beacons. Keep LEO vs GEO vs GPS MEO altitudes straight—the pool loves swapping the mile numbers.

Orbit classes you must separate

Class Altitude (pool figures) Motion relative to Earth Element 3 examples

LEO Hundreds of miles (Iridium 485 mi ) Moves quickly; needs constellation handoff Iridium; many COSPAS-SARSAT packages historically LEO

  • MEO GPS ~12,554 mi Moves; designed visibility windows GPS navigation constellation
  • GEO / geosynchronous equatorial INMARSAT ~22,177 mi Appears fixed over equator INMARSAT maritime satellites

GEO sits near 35,786 km / ~22,300 mi so orbital period matches Earth’s rotation—one satellite hangs over a fixed longitude. LEO periods are about 90 minutes (Iridium pool: approximately 85 minutes ). GPS is neither GEO nor low-handheld LEO—it is a medium-altitude navigation constellation.

  • Low Earth Orbit systems (3-P-095)
  • Iridium (pool facts)
  • Item Element 3 value
  • Orbiting altitude 485 miles
  • Telephone/messaging band 1616–1626 MHz
  • Services Digital voice and data at 2.4 kbps
  • Orbital period Approximately 85 minutes

Iridium-class LEO systems trade tiny handheld antennas and true polar coverage against the need for many satellites and frequent handoffs. Spot-beam footprints are small compared with a GEO ocean region—that is why the constellation is large.

COSPAS-SARSAT — satellite distress detection

The main function of the COSPAS-SARSAT satellite system is to monitor 406 MHz for distress calls from EPIRBs (and related 406 MHz beacons such as ELTs/PLBs). Do not put COSPAS-SARSAT on INMARSAT L-band voice channels or claim it primarily monitors 121.5 MHz voice (legacy 121.5 satellite processing has been phased down; Element 3 still centers 406 MHz ).

How position is determined (pool): by measuring the Doppler shift of the 406 MHz signal taken at several different points in the satellite’s orbit. A LEO bird hears a rising then falling frequency as it passes the beacon; the Doppler curve encodes the beacon’s location for Local User Terminals and the SAR distribution network. (Many modern beacons also encode GNSS position in the message—but the classic Element 3 answer emphasizes Doppler .)

  • Beacon path System Role
  • 406 MHz EPIRB/ELT/PLB COSPAS-SARSAT Global distress alerting & locating
  • INMARSAT SES distress INMARSAT land earth stations Ship terminal distress via GEO satcom
  • SART Ship X-band radar (not satellite) Local radar homing only
  • INMARSAT communications (3-P-096 & 097)
  • Geostationary maritime backbone

Orbital altitude of INMARSAT satellites: about 22,177 miles (pool figure). They are geostationary over the equator and provide coverage to vessels in nearly all of the world’s navigable waters —not polar-orbit “true global” in the LEO sense, and high latitudes near the poles can be marginal because elevation angles go to zero.

Ocean region description (pool):

  • AOR-E at 15.5° W
  • AOR-W at 54° W
  • POR at 178° E
  • IOR at 64.5° E

What can make INMARSAT-B communications impossible?

Pool answer: all of these —

A mast or obstruction blocking the path when the ship steers a certain course.

A satellite signal at low elevation / below the horizon .

Travel beyond the effective radius of that satellite’s coverage.

Directional SES antennas must stay pointed; shading and geometry are operational failure modes, not just “radio broken.”

INMARSAT-C vs -B antennas and services

System Antenna (pool) Service character

INMARSAT-C Small, omnidirectional SES antenna Store-and-forward system for routine and distress messaging (not real-time voice)

  • INMARSAT-B Larger, directional (stabilized) antenna Real-time voice (CODECs digitize voice), fax, data
  • INMARSAT-M Spot-beam era mobile Voice 6.2 kbps , data 2.4 kbps , fax 2.4 kbps , e-mail
  • mini-M Spot beams for small craft Compact mobile satcom using spot beams
  • High-speed data 64/54 kbps — Offered on B, M4, and Fleet (not C alone)

INMARSAT-C is the GMDSS workhorse for ships that need distress and safety messaging without a large stabilized dish: the omnidirectional antenna is simpler to install and keep working in heavy weather. Messages are stored and forwarded through the network—think enhanced telex/email-style delivery, not a phone call.

INMARSAT-B (legacy digital GEO mobile) used CODECs to digitize the voice signal for satellite voice. Compare antennas correctly on exam day: C = small omni; B = larger directional —never reverse them.

INMARSAT-B services (pool): voice at 16 kbps , fax at 14.4 kbps , and high-speed data at 64/54 kbps-class rates.

  • GPS — Global Positioning System (3-P-098)
  • Constellation
  • Parameter Element 3 fact
  • Orbit altitude 12,554 miles
  • Number normally in operation 24
  • Orbital geometry Six orbital planes, equally spaced, inclined about 55° to the equator
  • Transmit frequencies 1575.4 MHz (L1) and 1227.6 MHz (L2)
  • Sats needed for complete position and time 4
  • Trilateration and the fourth satellite

Each GPS satellite broadcasts precise time and ephemeris (orbital data). A receiver measures pseudorange to each satellite from signal travel time (speed of light × delay, with clock and propagation errors).

Three perfect ranges would fix a 3-D position if the receiver clock were perfect.

Real receiver clocks are imperfect, so a fourth satellite is required to solve for three position coordinates + clock bias —“complete position and time.”

That is trilateration (ranges), not compass bearings. L1 (1575.4 MHz) is the primary civil frequency you will see on every chartplotter and phone GNSS front-end; L2 (1227.6 MHz) supports dual-frequency ionospheric correction and authorized services.

DGPS

DGPS (Differential GPS) is a system that provides additional correction factors to improve position accuracy . A reference station at a known location measures GPS errors and broadcasts corrections to nearby users (historically MF marine beacons, also satellite-based augmentation in broader GNSS practice). It is not merely “digital ground position system” wordplay and not an altitude-only aircraft product in the Element 3 definition.

GMDSS satellite distress path overview

For the GROL tech supporting compulsory vessels, satellite distress is a layered system:

Alert: Ship INMARSAT SES distress function and/or 406 MHz EPIRB via COSPAS-SARSAT .

Locate: COSPAS-SARSAT Doppler (and/or GNSS-coded position); INMARSAT path delivers identity/position through land earth stations to RCC.

Local home: Rescuers use SART on X-band radar and VHF Ch-16 / portable survival radios near the scene.

Navigate: Bridge GPS/DGPS feeds DSC, ECDIS, and INMARSAT terminals with position.

If the GEO satellite is shadowed or the ship is outside an ocean region, LEO beacon detection and terrestrial/MF-HF GMDSS paths remain critical—another reason Element 3 tests both INMARSAT GEO facts and COSPAS-SARSAT LEO Doppler facts.

Service notes for GROL maintainers

INMARSAT directional antennas: verify clear sky view, stabilization, and cable/waveguide integrity; mast shadow on certain headings is a real “RF works on some courses only” complaint.

INMARSAT-C omni: check antenna height/clearance and GNSS input used for distress position injection.

GPS antennas: need sky view; multipath off superstructure degrades accuracy—mount away from radar scanners and INMARSAT dishes when possible.

EPIRB registration and 406 MHz coding: wrong MMSI/hex ID wastes the satellite path you just studied.

Do not confuse GPS L1 with Iridium 1616–1626 MHz or INMARSAT L-band service frequencies.

Exam-day checklist (3-P 095–098)

Iridium: 485 mi , 1616–1626 MHz , digital voice/data 2.4 kbps , period ~85 min .

COSPAS-SARSAT: monitor 406 MHz EPIRBs; position via Doppler of the 406 MHz signal.

INMARSAT altitude ~22,177 mi ; regions AOR-E 15.5°W, AOR-W 54°W, POR 178°E, IOR 64.5°E ; coverage of nearly all navigable waters.

C = store-and-forward, omni antenna; B = directional, CODEC voice, higher-rate services; HSD 64/54 on B, M4, Fleet .

GPS: 12,554 mi , 24 sats, six planes ~55° , 1575.4 & 1227.6 MHz , need 4 sats; DGPS = correction factors for accuracy.

GMDSS uses INMARSAT + COSPAS-SARSAT + local SART/VHF —know which segment each device belongs to.

Master LEO vs GEO mileages and the C omni / B dish antenna contrast and Topic 3-P becomes high-percentage points on Element 3. Safety Topic 3-Q (RF exposure and electrical safety) is the final technical cluster after this chapter.