Study guide
12.1 Reaction Kinetics and Performance Metrics
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
12.1 Reaction Kinetics and Performance Metrics
Key Takeaways Explain This Topic AI
Homogeneous reaction rates relate to stoichiometry: relative rates of consumption/formation are proportional to stoichiometric coefficients.
Reaction order determines the mathematical dependence of rate on concentration and the physical units of the rate constant k k k .
The Arrhenius equation models temperature dependence; temperature must be in absolute Kelvin units to avoid calculation errors.
Conversion measures the fraction of key reactant consumed in batch or steady-state flow systems.
In multiple reaction systems, selectivity defines the ratio of desired to undesired product rates, and yield measures conversion efficiency.
Last updated: July 2026
Reaction kinetics lies at the heart of chemical reaction engineering, describing the rate at which chemical species are consumed or generated during a reaction. In the FE Chemical exam, mastering these concepts requires a solid grasp of rate laws, stoichiometry, Arrhenius temperature dependence, and key performance indicators like conversion, yield, and selectivity. The FE Reference Handbook v10.6 provides the primary equations in the 'Chemical Engineering' section under 'Chemical Reaction Engineering'.
Homogeneous Reaction Rates and Stoichiometry
A homogeneous reaction occurs in a single phase (typically liquid or gas). The rate of reaction of a species i i i , denoted as r i r_i r i , is defined as the change in moles of i i i per unit time per unit volume of reacting mixture: r i = 1 V d N i d t r_i = \frac{1}{V} \frac{dN_i}{dt} r i = V 1 d t d N i
where V V V is the volume of the reaction mixture, N i N_i N i is the number of moles of species i i i , and t t t is time. The rate of reaction r i r_i r i is negative for reactants (since they are consumed) and positive for products (since they are formed). To define a rate of reaction that is independent of the species chosen, we use the stoichiometry of the reaction. For a general reaction: a A + b B → c C + d D a\text{A} + b\text{B} \rightarrow c\text{C} + d\text{D} a A + b B → c C + d D
where a , b , c , a, b, c, a , b , c , and d d d are stoichiometric coefficients, the relative rates of reaction are related by: − r A a = − r B b = r C c = r D d \frac{-r_{\text{A}}}{a} = \frac{-r_{\text{B}}}{b} = \frac{r_{\text{C}}}{c} = \frac{r_{\text{D}}}{d} a − r A = b − r B = c r C = d r D
Here, − r A -r_{\text{A}} − r A and − r B -r_{\text{B}} − r B represent the rates of disappearance of reactants A and B, respectively, while r C r_{\text{C}} r C and r D r_{\text{D}} r D are the rates of formation of products C and D. A classic FE exam question will provide the rate of disappearance of one reactant and ask for the rate of appearance of a product. In such cases, direct substitution into these ratios is the key.
Rate Laws and Reaction Order
The rate of reaction is generally a function of species concentrations and temperature. Under isothermal conditions, the rate of consumption of reactant A is typically represented by a power-law rate equation: − r A = k C A α C B β -r_{\text{A}} = k C_{\text{A}}^{\alpha} C_{\text{B}}^{\beta} − r A = k C A α C B β
where C A C_{\text{A}} C A and C B C_{\text{B}} C B are the molar concentrations of A and B, respectively. The parameters α \alpha α and β \beta β are the reaction orders with respect to reactants A and B. The sum of these individual orders, n = α + β n = \alpha + \beta n = α + β , is the overall reaction order.
Elementary Reactions: For elementary reactions, the reaction orders match the stoichiometric coefficients (e.g., α = a \alpha = a α = a and β = b \beta = b β = b ).
Non-Elementary Reactions: For non-elementary reactions, there is no direct correspondence, and the orders must be determined experimentally.
The proportionality constant k k k is the reaction rate constant. The units of k k k depend on the overall reaction order n n n and are derived from the rate law: [ k ] = ( volume mole ) n − 1 ⋅ 1 time [k] = \left(\frac{\text{volume}}{\text{mole}}\right)^{n-1} \cdot \frac{1}{\text{time}} [ k ] = ( mole volume ) n − 1 ⋅ time 1
In common SI units:
For a zero-order reaction ( n = 0 n=0 n = 0 ): k k k has units of mol / ( L ⋅ s ) \text{mol}/(\text{L}\cdot\text{s}) mol / ( L ⋅ s ) .
For a first-order reaction ( n = 1 n=1 n = 1 ): k k k has units of s − 1 \text{s}^{-1} s − 1 .
For a second-order reaction ( n = 2 n=2 n = 2 ): k k k has units of L / ( mol ⋅ s ) \text{L}/(\text{mol}\cdot\text{s}) L / ( mol ⋅ s ) .
For a third-order reaction ( n = 3 n=3 n = 3 ): k k k has units of L 2 / ( mol 2 ⋅ s ) \text{L}^2/(\text{mol}^2\cdot\text{s}) L 2 / ( mol 2 ⋅ s ) .
Reaction Order ( n n n ) Rate Law Units of k k k (SI)
0 − r A = k -r_{\text{A}} = k − r A = k mol / ( L ⋅ s ) \text{mol}/(\text{L}\cdot\text{s}) mol / ( L ⋅ s ) or mol / ( m 3 ⋅ s ) \text{mol}/(\text{m}^3\cdot\text{s}) mol / ( m 3 ⋅ s )
1 − r A = k C A -r_{\text{A}} = k C_{\text{A}} − r A = k C A s − 1 \text{s}^{-1} s − 1
2 − r A = k C A 2 -r_{\text{A}} = k C_{\text{A}}^2 − r A = k C A 2 or k C A C B k C_{\text{A}} C_{\text{B}} k C A C B L / ( mol ⋅ s ) \text{L}/(\text{mol}\cdot\text{s}) L / ( mol ⋅ s ) or m 3 / ( mol ⋅ s ) \text{m}^3/(\text{mol}\cdot\text{s}) m 3 / ( mol ⋅ s )
3 − r A = k C A 3 -r_{\text{A}} = k C_{\text{A}}^3 − r A = k C A 3 L 2 / ( mol 2 ⋅ s ) \text{L}^2/(\text{mol}^2\cdot\text{s}) L 2 / ( mol 2 ⋅ s ) or m 6 / ( mol 2 ⋅ s ) \text{m}^6/(\text{mol}^2\cdot\text{s}) m 6 / ( mol 2 ⋅ s )
Temperature Dependence: The Arrhenius Equation
The rate constant k k k is strongly dependent on temperature. This behavior is modeled by the Arrhenius equation: k = A exp ( − E a R T ) k = A \exp\left(-\frac{E_a}{R T}\right) k = A exp ( − RT E a )
where:
A A A is the pre-exponential factor (same units as k k k ), representing the frequency of collisions.
E a E_a E a is the activation energy ( J/mol \text{J/mol} J/mol or cal/mol \text{cal/mol} cal/mol ), representing the minimum energy barrier that must be overcome for a reaction to occur.
R R R is the universal gas constant ( 8.314 J/(mol ⋅ K) 8.314\text{ J/(mol}\cdot\text{K)} 8.314 J/(mol ⋅ K) or 1.987 cal/(mol ⋅ K) 1.987\text{ cal/(mol}\cdot\text{K)} 1.987 cal/(mol ⋅ K) ).
T T T is the absolute temperature in Kelvin ( K \text{K} K ).
To compare rate constants at two different temperatures ( T 1 T_1 T 1 and T 2 T_2 T 2 ), the Arrhenius equation is integrated to yield the two-point form: ln ( k 2 k 1 ) = − E a R ( 1 T 2 − 1 T 1 ) \ln\left(\frac{k_2}{k_1}\right) = \frac{-E_a}{R} \left(\frac{1}{T_2} - \frac{1}{T_1}\right) ln ( k 1 k 2 ) = R − E a ( T 2 1 − T 1 1 )
This can be rewritten as: ln ( k 2 k 1 ) = E a R ( 1 T 1 − 1 T 2 ) \ln\left(\frac{k_2}{k_1}\right) = \frac{E_a}{R} \left(\frac{1}{T_1} - \frac{1}{T_2}\right) ln ( k 1 k 2 ) = R E a ( T 1 1 − T 2 1 )
On the FE Chemical exam, you are frequently asked to find E a E_a E a given rate constants at two temperatures, or to calculate a rate constant at a new temperature. A common error is entering temperatures in Celsius rather than Kelvin, which will lead to incorrect answers that often match distractor options.
Performance Metrics: Conversion, Yield, and Selectivity
To evaluate and design chemical reactors, engineers use quantitative performance metrics.
1. Conversion ( X A X_{\text{A}} X A )
Conversion is defined as the ratio of the moles of key reactant (usually the limiting reactant, designated as A) reacted to the moles of reactant fed to the system.
For a batch reactor (closed system): X A = N A 0 − N A N A 0 X_{\text{A}} = \frac{N_{\text{A}0} - N_{\text{A}}}{N_{\text{A}0}} X A = N A 0 N A 0 − N A where N A 0 N_{\text{A}0} N A 0 is the initial number of moles of A, and N A N_{\text{A}} N A is the moles of A remaining at time t t t .
For a flow reactor (open system at steady state): X A = F A 0 − F A F A 0 X_{\text{A}} = \frac{F_{\text{A}0} - F_{\text{A}}}{F_{\text{A}0}} X A = F A 0 F A 0 − F A where F A 0 F_{\text{A}0} F A 0 is the molar flow rate of A entering the reactor, and F A F_{\text{A}} F A is the molar flow rate of A leaving the reactor.
2. Selectivity ( S S S )
In multiple-reaction systems, the reactant may form both desired ( D D D ) and undesired ( U U U ) products. Selectivity is a measure of the system's ability to favor the desired reaction over the undesired one.
Instantaneous Selectivity ( S D/U S_{\text{D/U}} S D/U ): The ratio of the rate of formation of the desired product to the rate of formation of the undesired product: S D/U = r D r U S_{\text{D/U}} = \frac{r_{\text{D}}}{r_{\text{U}}} S D/U = r U r D
Overall Selectivity ( S ~ D/U \tilde{S}_{\text{D/U}} S ~ D/U ): The ratio of the exit molar flow rates of the desired product to the undesired product (for flow systems): S ~ D/U = F D F U \tilde{S}_{\text{D/U}} = \frac{F_{\text{D}}}{F_{\text{U}}} S ~ D/U = F U F D
3. Yield ( Y Y Y )
Yield measures the efficiency of converting reactant into the desired product. In the literature, yield can be defined in multiple ways, so pay close attention to NCEES wording:
Yield based on reactant consumed (Fractional Yield): Y D = moles of D formed moles of key reactant A consumed = F D − F D 0 F A 0 − F A Y_{\text{D}} = \frac{\text{moles of D formed}}{\text{moles of key reactant A consumed}} = \frac{F_{\text{D}} - F_{\text{D}0}}{F_{\text{A}0} - F_{\text{A}}} Y D = moles of key reactant A consumed moles of D formed = F A 0 − F A F D − F D 0
Yield based on reactant fed: Y D, feed = moles of D formed moles of key reactant A fed = F D − F D 0 F A 0 Y_{\text{D, feed}} = \frac{\text{moles of D formed}}{\text{moles of key reactant A fed}} = \frac{F_{\text{D}} - F_{\text{D}0}}{F_{\text{A}0}} Y D, feed = moles of key reactant A fed moles of D formed = F A 0 F D − F D 0
Note that the overall yield is equal to the overall selectivity multiplied by the conversion of the key reactant: Y D, feed = S ~ D/U ⋅ X A ⋅ ν Y_{\text{D, feed}} = \tilde{S}_{\text{D/U}} \cdot X_{\text{A}} \cdot \nu Y D, feed = S ~ D/U ⋅ X A ⋅ ν (where ν \nu ν is a stoichiometric factor relating A to D).
Worked Example: Activation Energy Calculation
Problem: A first-order gas-phase reaction has a rate constant of 0.015 s − 1 0.015\text{ s}^{-1} 0.015 s − 1 at 300 K 300\text{ K} 300 K . When the temperature is increased to 350 K 350\text{ K} 350 K , the rate constant increases to 0.275 s − 1 0.275\text{ s}^{-1} 0.275 s − 1 . Calculate the activation energy E a E_a E a of this reaction in kJ/mol \text{kJ/mol} kJ/mol .
Solution:
State the given parameters:
- T 1 = 300 K T_1 = 300\text{ K} T 1 = 300 K
- k 1 = 0.015 s − 1 k_1 = 0.015\text{ s}^{-1} k 1 = 0.015 s − 1
- T 2 = 350 K T_2 = 350\text{ K} T 2 = 350 K
- k 2 = 0.275 s − 1 k_2 = 0.275\text{ s}^{-1} k 2 = 0.275 s − 1
- R = 8.314 J/(mol ⋅ K) R = 8.314\text{ J/(mol}\cdot\text{K)} R = 8.314 J/(mol ⋅ K)
Set up the integrated two-point Arrhenius equation: ln ( k 2 k 1 ) = E a R ( 1 T 1 − 1 T 2 ) \ln\left(\frac{k_2}{k_1}\right) = \frac{E_a}{R} \left(\frac{1}{T_1} - \frac{1}{T_2}\right) ln ( k 1 k 2 ) = R E a ( T 1 1 − T 2 1 )
Substitute the values: ln ( 0.275 0.015 ) = E a 8.314 ( 1 300 − 1 350 ) \ln\left(\frac{0.275}{0.015}\right) = \frac{E_a}{8.314} \left(\frac{1}{300} - \frac{1}{350}\right) ln ( 0.015 0.275 ) = 8.314 E a ( 300 1 − 350 1 )
Calculate the left side and the temperature terms: ln ( 18.333 ) ≈ 2.9087 \ln(18.333) \approx 2.9087 ln ( 18.333 ) ≈ 2.9087 ( 1 300 − 1 350 ) = 0.0033333 − 0.0028571 = 0.00047619 K − 1 \left(\frac{1}{300} - \frac{1}{350}\right) = 0.0033333 - 0.0028571 = 0.00047619\text{ K}^{-1} ( 300 1 − 350 1 ) = 0.0033333 − 0.0028571 = 0.00047619 K − 1
Solve for E a E_a E a : 2.9087 = E a 8.314 ⋅ 0.00047619 2.9087 = \frac{E_a}{8.314} \cdot 0.00047619 2.9087 = 8.314 E a ⋅ 0.00047619 E a = 2.9087 ⋅ 8.314 0.00047619 ≈ 50 , 789 J/mol E_a = \frac{2.9087 \cdot 8.314}{0.00047619} \approx 50,789\text{ J/mol} E a = 0.00047619 2.9087 ⋅ 8.314 ≈ 50 , 789 J/mol
Convert to kJ/mol \text{kJ/mol} kJ/mol : E a ≈ 50.8 kJ/mol E_a \approx 50.8\text{ kJ/mol} E a ≈ 50.8 kJ/mol
This step-by-step method ensures accuracy. Pay attention to the temperature unit conversion; if the problem had given the temperatures in Celsius, converting them to Kelvin first is mandatory.