Study guide
5.3 Biological Systems and Kinetics
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
5.3 Biological Systems and Kinetics
Key Takeaways Explain This Topic AI
Prokaryotic cells lack a nucleus and membrane-bound organelles, unlike eukaryotes which possess mitochondria, nuclei, and internal membranes.
Cell growth kinetics are modeled by the Monod equation, which relates specific growth rate μ \mu μ to the concentration of a limiting substrate.
In a steady-state chemostat with sterile feed, the specific growth rate μ \mu μ is constrained to equal the dilution rate plus the cell decay coefficient.
Enzyme catalysis kinetics are described by the Michaelis-Menten equation and are linearized using Lineweaver-Burk plots to determine V max V_{\text{max}} V max and K m K_m K m .
Reversible enzyme inhibitors are classified as competitive, non-competitive, or uncompetitive based on how they alter apparent K m K_m K m and V max V_{\text{max}} V max .
Last updated: July 2026
Biological processes are central to many chemical engineering applications, particularly in wastewater treatment, food processing, pharmaceuticals, and industrial biotechnology. The FE Chemical exam covers cell structure, cellular growth kinetics, and enzyme kinetics.
Cell Classification and Structure
Organisms are classified into two primary categories based on cellular complexity: prokaryotes and eukaryotes.
Prokaryotes (e.g., bacteria and archaea) are single-celled organisms that lack a membrane-bound nucleus and membrane-bound organelles. Their genetic material is located in a nucleoid region as a single, circular double-stranded DNA molecule. Most bacteria possess a rigid cell wall composed of peptidoglycan, which provides structural integrity and protects the cell from osmotic lysis.
Eukaryotes (e.g., yeast, fungi, algae, and protozoa, as well as plant and animal cells) possess a membrane-bound nucleus housing linear chromosomes. They contain specialized membrane-bound organelles that partition biochemical functions.
Key cellular structures and their functions include:
Cell Membrane : A phospholipid bilayer with embedded proteins that acts as a selectively permeable barrier, controlling the transport of nutrients and wastes via active and passive transport mechanisms.
Mitochondria : The 'powerhouses' of eukaryotic cells, where aerobic cellular respiration occurs, generating adenosine triphosphate (ATP) via the electron transport chain.
Ribosomes : Complexes of RNA and protein responsible for translating messenger RNA (mRNA) into polypeptide chains during protein synthesis.
Cell Wall : A rigid outer layer found in plants (cellulose), fungi (chitin), and bacteria (peptidoglycan) that maintains cell shape and prevents osmotic rupture.
Cell Growth and Decay Kinetics
Bacterial reproduction typically occurs via binary fission, leading to exponential growth under ideal conditions. The rate of cell growth is modeled using the Monod equation, which relates the specific growth rate μ \mu μ ( T − 1 T^{-1} T − 1 ) to the concentration of a limiting substrate S S S ( M / L 3 M/L^3 M / L 3 ): μ = μ max S K s + S \mu = \frac{\mu_{\text{max}} S}{K_s + S} μ = K s + S μ max S
where μ max \mu_{\text{max}} μ max is the maximum specific growth rate and K s K_s K s is the half-velocity constant (the substrate concentration at which μ = 0.5 μ max \mu = 0.5 \mu_{\text{max}} μ = 0.5 μ max ).
At high substrate concentrations ( S ≫ K s S \gg K_s S ≫ K s ), the specific growth rate approaches its maximum value ( μ ≈ μ max \mu \approx \mu_{\text{max}} μ ≈ μ max ), resulting in zero-order dependence on substrate and first-order exponential growth of biomass (Malthusian phase).
At low substrate concentrations ( S ≪ K s S \ll K_s S ≪ K s ), the specific growth rate is approximately linear with substrate concentration ( μ ≈ μ max K s S \mu \approx \frac{\mu_{\text{max}}}{K_s} S μ ≈ K s μ max S ), reflecting a first-order dependence on substrate.
The rate of biomass growth r g r_g r g is: r g = μ X r_g = \mu X r g = μ X
where X X X is the biomass concentration ( M / L 3 M/L^3 M / L 3 ). In real systems, cells also undergo endogenous decay due to maintenance energy requirements and cell death. The net biomass growth rate r g ′ r_g' r g ′ accounts for this decay: r g ′ = ( μ − d ) X = ( μ max S K s + S − d ) X r_g' = (\mu - d) X = \left(\frac{\mu_{\text{max}} S}{K_s + S} - d\right) X r g ′ = ( μ − d ) X = ( K s + S μ max S − d ) X
where d d d is the endogenous decay coefficient ( T − 1 T^{-1} T − 1 ). The rate of substrate consumption r s r_s r s is related to biomass growth via the yield coefficient Y X / S Y_{X/S} Y X / S (mass of cells formed per mass of substrate consumed): r s = − r g Y X / S = − μ X Y X / S r_s = -\frac{r_g}{Y_{X/S}} = -\frac{\mu X}{Y_{X/S}} r s = − Y X / S r g = − Y X / S μ X
The doubling time t d t_d t d of a cell population during the exponential phase (where decay is negligible) is: t d = ln 2 μ max t_d = \frac{\ln 2}{\mu_{\text{max}}} t d = μ max ln 2
Chemostat (CSTR) Mass Balance
A chemostat is a continuous stirred-tank reactor (CSTR) used for cell culture. Assuming sterile feed ( X 0 = 0 X_0 = 0 X 0 = 0 ), a steady-state mass balance on cells yields: Accumulation = In − Out + Generation \text{Accumulation} = \text{In} - \text{Out} + \text{Generation} Accumulation = In − Out + Generation 0 = 0 − F X + V ( μ − d ) X 0 = 0 - F X + V (\mu - d) X 0 = 0 − FX + V ( μ − d ) X
Dividing by V X V X V X gives: μ = F V + d = D + d \mu = \frac{F}{V} + d = D + d μ = V F + d = D + d
where D = F / V D = F/V D = F / V is the dilution rate ( T − 1 T^{-1} T − 1 ), which is the reciprocal of the space time ( τ \tau τ ). This fundamental equation demonstrates that under steady-state conditions, the cell growth rate is locked to the dilution rate and the decay coefficient. If the dilution rate exceeds the maximum specific growth rate ( μ max \mu_{\text{max}} μ max ), cells are washed out of the reactor faster than they can reproduce ( X → 0 X \rightarrow 0 X → 0 ), a condition known as washout.
Enzyme Kinetics and Biocatalysis
Enzymes are specialized protein catalysts that accelerate biochemical reactions by lowering the activation energy barrier. They do not alter the equilibrium of the reaction. The kinetics of single-substrate enzyme-catalyzed reactions are described by the Michaelis-Menten model: v = V max [ S ] K m + [ S ] v = \frac{V_{\text{max}} [S]}{K_m + [S]} v = K m + [ S ] V max [ S ]
where v v v is the reaction rate, V max V_{\text{max}} V max is the maximum reaction rate (which equals k cat [ E ] 0 k_{\text{cat}} [E]_0 k cat [ E ] 0 , where k cat k_{\text{cat}} k cat is the turnover number and [ E ] 0 [E]_0 [ E ] 0 is the total enzyme concentration), and K m K_m K m is the Michaelis constant, which reflects the affinity of the enzyme for the substrate (a lower K m K_m K m indicates higher affinity). To determine the kinetic parameters V max V_{\text{max}} V max and K m K_m K m from experimental data, the Michaelis-Menten equation is linearized into the Lineweaver-Burk (double-reciprocal) plot: 1 v = K m V max 1 [ S ] + 1 V max \frac{1}{v} = \frac{K_m}{V_{\text{max}}} \frac{1}{[S]} + \frac{1}{V_{\text{max}}} v 1 = V max K m [ S ] 1 + V max 1
Plotting 1 / v 1/v 1/ v against 1 / [ S ] 1/[S] 1/ [ S ] yields a straight line where the y-intercept is 1 / V max 1/V_{\text{max}} 1/ V max , the x-intercept is − 1 / K m -1/K_m − 1/ K m , and the slope is K m / V max K_m / V_{\text{max}} K m / V max .
Enzyme Inhibition
Inhibitors are molecules that reduce enzyme activity. The three primary types of reversible inhibition are:
Competitive Inhibition : The inhibitor competes with the substrate for the active site. Adding more substrate can overcome this inhibition. Thus, V max V_{\text{max}} V max remains unchanged, but the apparent Michaelis constant increases: K m , app = K m ( 1 + [ I ] / K i ) K_{m,\text{app}} = K_m (1 + [I]/K_i) K m , app = K m ( 1 + [ I ] / K i ) , where [ I ] [I] [ I ] is the inhibitor concentration and K i K_i K i is the dissociation constant of the enzyme-inhibitor complex.
Non-competitive Inhibition : The inhibitor binds to an allosteric site on the enzyme, regardless of whether substrate is bound. This decreases the concentration of active enzyme. The substrate affinity is unaffected, so K m K_m K m remains unchanged, but V max V_{\text{max}} V max decreases: V max,app = V max / ( 1 + [ I ] / K i ) V_{\text{max,app}} = V_{\text{max}} / (1 + [I]/K_i) V max,app = V max / ( 1 + [ I ] / K i ) .
Uncompetitive Inhibition : The inhibitor binds only to the enzyme-substrate ( E S ES ES ) complex. Both V max V_{\text{max}} V max and K m K_m K m decrease by the same factor α = 1 + [ I ] / K i \alpha = 1 + [I]/K_i α = 1 + [ I ] / K i , resulting in a parallel shift on the Lineweaver-Burk plot.