Study guide
6.2 Bernoulli Equation and Mechanical Energy Balances
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
6.2 Bernoulli Equation and Mechanical Energy Balances
Key Takeaways Explain This Topic AI
The ideal Bernoulli equation assumes steady, incompressible, frictionless flow along a streamline.
The engineering Bernoulli equation extends the ideal balance by adding shaft work (pumps/turbines) and frictional head losses.
Frictional head loss in pipes is calculated via the Darcy-Weisbach equation using the Darcy friction factor (f_D).
The Darcy friction factor is four times the Fanning friction factor (f_D = 4 * f_f); using the wrong factor introduces a fourfold error.
The Ergun equation calculates packed bed pressure drops, combining a viscous laminar term and a turbulent inertial term.
Last updated: July 2026
The Ideal Bernoulli Equation
The Bernoulli equation is a simplified form of the mechanical energy balance, representing the conservation of mechanical energy along a streamline. It is derived under four strict assumptions:
Steady flow: Velocity and properties at any point do not change with time.
Incompressible flow: Fluid density ( ρ \rho ρ ) remains constant.
Frictionless (inviscid) flow: Viscous shear stresses are negligible ( μ = 0 \mu = 0 μ = 0 ).
Flow along a streamline: The energy constant is conserved along specific paths of fluid particles.
Mathematically, the Bernoulli equation is expressed as: P 1 ρ + v 1 2 2 + g z 1 = P 2 ρ + v 2 2 2 + g z 2 \frac{P_1}{\rho} + \frac{v_1^2}{2} + g z_1 = \frac{P_2}{\rho} + \frac{v_2^2}{2} + g z_2 ρ P 1 + 2 v 1 2 + g z 1 = ρ P 2 + 2 v 2 2 + g z 2
Dividing each term by the gravitational acceleration ( g g g ) converts the equation into units of 'head' (length, e.g., meters or feet), which represents energy per unit weight of fluid: P 1 ρ g + v 1 2 2 g + z 1 = P 2 ρ g + v 2 2 2 g + z 2 \frac{P_1}{\rho g} + \frac{v_1^2}{2g} + z_1 = \frac{P_2}{\rho g} + \frac{v_2^2}{2g} + z_2 ρ g P 1 + 2 g v 1 2 + z 1 = ρ g P 2 + 2 g v 2 2 + z 2
where P ρ g \frac{P}{\rho g} ρ g P is the pressure head, v 2 2 g \frac{v^2}{2g} 2 g v 2 is the velocity (or dynamic) head, and z z z is the elevation (or potential) head.
The Extended Mechanical Energy Balance
In real chemical engineering systems, friction and work interactions cannot be ignored. The engineering Bernoulli equation, or extended mechanical energy balance, accounts for shaft work ( w s w_s w s , energy per unit mass) added by pumps or extracted by turbines, and frictional losses ( h f h_f h f , head loss): P 1 ρ g + α 1 v 1 2 2 g + z 1 + h p = P 2 ρ g + α 2 v 2 2 2 g + z 2 + h t + h f \frac{P_1}{\rho g} + \alpha_1 \frac{v_1^2}{2g} + z_1 + h_p = \frac{P_2}{\rho g} + \alpha_2 \frac{v_2^2}{2g} + z_2 + h_t + h_f ρ g P 1 + α 1 2 g v 1 2 + z 1 + h p = ρ g P 2 + α 2 2 g v 2 2 + z 2 + h t + h f
where h p h_p h p is the head added by a pump, h t h_t h t is the head extracted by a turbine, and h f h_f h f is the total head loss due to friction. The dimensionless kinetic energy correction factor ( α \alpha α ) accounts for the velocity profile: α = 2.0 \alpha = 2.0 α = 2.0 for fully developed laminar flow, and α ≈ 1.05 − 1.08 \alpha \approx 1.05 - 1.08 α ≈ 1.05 − 1.08 (often approximated as 1.0 1.0 1.0 ) for turbulent flow.
Frictional Losses in Pipes: Major and Minor Losses
Total head loss ( h f h_f h f ) consists of major losses due to skin friction in straight pipes and minor losses due to flow disruptions in valves, fittings, expansions, and contractions: h f = h f , major + h f , minor h_f = h_{f,\text{major}} + h_{f,\text{minor}} h f = h f , major + h f , minor
Major Losses (Darcy-Weisbach Equation): Major losses are calculated using the Darcy-Weisbach equation: h f , major = f D L D v 2 2 g h_{f,\text{major}} = f_D \frac{L}{D} \frac{v^2}{2g} h f , major = f D D L 2 g v 2
where f D f_D f D is the Darcy friction factor.
CRITICAL EXAM WARNING: The NCEES FE Reference Handbook provides both the Darcy friction factor ( f D f_D f D ) and the Fanning friction factor ( f f f_f f f ), which are related by: f D = 4 f f f_D = 4 f_f f D = 4 f f
For laminar flow ( R e < 2100 Re < 2100 R e < 2100 ), the friction factors are analytically determined as: f D = 64 R e and f f = 16 R e f_D = \frac{64}{Re} \quad \text{and} \quad f_f = \frac{16}{Re} f D = R e 64 and f f = R e 16
Using the wrong friction factor will result in a factor-of-4 error. For turbulent flow, f D f_D f D is obtained from the Moody diagram or approximated by the Colebrook equation, depending on the relative roughness ( ϵ / D \epsilon/D ϵ / D ).
Minor Losses: Minor losses are expressed using a loss coefficient ( K L K_L K L ): h f , minor = K L v 2 2 g h_{f,\text{minor}} = K_L \frac{v^2}{2g} h f , minor = K L 2 g v 2
Alternatively, minor losses can be represented using an equivalent length of pipe ( L eq L_{\text{eq}} L eq ) added to the physical pipe length in the Darcy-Weisbach equation.
Flow through Packed Beds: The Ergun Equation
Chemical engineers frequently model pressure drop through packed beds (such as catalytic reactors or absorption columns). The Ergun equation calculates the pressure drop ( Δ P \Delta P Δ P ) over a bed of length L L L packed with spherical particles of diameter D p D_p D p and sphericity ϕ s \phi_s ϕ s , at a void fraction (porosity) ϵ \epsilon ϵ : Δ P L = 150 v o μ ( 1 − ϵ ) 2 D p 2 ϕ s 2 ϵ 3 + 1.75 ρ v o 2 ( 1 − ϵ ) D p ϕ s ϵ 3 \frac{\Delta P}{L} = \frac{150 v_o \mu (1-\epsilon)^2}{D_p^2 \phi_s^2 \epsilon^3} + \frac{1.75 \rho v_o^2 (1-\epsilon)}{D_p \phi_s \epsilon^3} L Δ P = D p 2 ϕ s 2 ϵ 3 150 v o μ ( 1 − ϵ ) 2 + D p ϕ s ϵ 3 1.75 ρ v o 2 ( 1 − ϵ )
where v o v_o v o is the superficial velocity, defined as the volumetric flow rate divided by the empty bed cross-sectional area ( v o = Q / A bed v_o = Q / A_{\text{bed}} v o = Q / A bed ).
The Ergun equation combines two distinct terms:
The Viscous Term (Kozeny-Carman Equation): The first term dominates at low particle Reynolds numbers ( R e p < 10 Re_p < 10 R e p < 10 ), where viscous forces govern the flow. The particle Reynolds number is defined as: R e p = D p v o ρ μ ( 1 − ϵ ) Re_p = \frac{D_p v_o \rho}{\mu (1-\epsilon)} R e p = μ ( 1 − ϵ ) D p v o ρ
The Inertial Term (Burke-Plummer Equation): The second term dominates at high particle Reynolds numbers ( R e p > 1000 Re_p > 1000 R e p > 1000 ), where turbulent inertial losses dominate.
Summary of Friction Factors
Flow Regime Darcy Friction Factor ( f D f_D f D ) Fanning Friction Factor ( f f f_f f f ) Analytical Solution
Laminar ( R e < 2100 Re < 2100 R e < 2100 ) f D = 64 / R e f_D = 64/Re f D = 64/ R e f f = 16 / R e f_f = 16/Re f f = 16/ R e Yes
Turbulent ( R e > 4000 Re > 4000 R e > 4000 ) Moody Chart / Colebrook f f = f D / 4 f_f = f_D / 4 f f = f D /4 Empirical / Implicit
Worked Example 1: Pump Head in a Piping System
Problem: Water ( ρ = 1000 kg/m 3 \rho = 1000\text{ kg/m}^3 ρ = 1000 kg/m 3 , μ = 1.0 cP \mu = 1.0\text{ cP} μ = 1.0 cP ) is pumped from a lower reservoir to an upper reservoir open to the atmosphere. The elevation difference is 15 m 15\text{ m} 15 m . The pipe has a diameter of 0.10 m 0.10\text{ m} 0.10 m , a length of 100 m 100\text{ m} 100 m , and a flow velocity of 2.0 m/s 2.0\text{ m/s} 2.0 m/s . The system includes four 90 ∘ 90^\circ 9 0 ∘ elbows ( K L = 0.75 K_L = 0.75 K L = 0.75 each) and a fully open gate valve ( K L = 0.15 K_L = 0.15 K L = 0.15 ). The Darcy friction factor is f D = 0.02 f_D = 0.02 f D = 0.02 . Calculate the required pump head ( h p h_p h p ) and the pump shaft power if the pump is 75 % 75\% 75% efficient.
Solution:
First, identify states 1 and 2 at the reservoir surfaces: P 1 = P 2 = P atm P_1 = P_2 = P_{\text{atm}} P 1 = P 2 = P atm (so Δ P = 0 \Delta P = 0 Δ P = 0 ) and v 1 ≈ v 2 ≈ 0 v_1 \approx v_2 \approx 0 v 1 ≈ v 2 ≈ 0 .
The extended Bernoulli equation simplifies to: h p = ( z 2 − z 1 ) + h f h_p = (z_2 - z_1) + h_f h p = ( z 2 − z 1 ) + h f
Calculate the major head loss: h f , major = f D L D v 2 2 g = 0.02 ⋅ 100 m 0.10 m ⋅ ( 2.0 m/s ) 2 2 ⋅ 9.807 m/s 2 = 20 ⋅ 0.2039 m ≈ 4.08 m h_{f,\text{major}} = f_D \frac{L}{D} \frac{v^2}{2g} = 0.02 \cdot \frac{100\text{ m}}{0.10\text{ m}} \cdot \frac{(2.0\text{ m/s})^2}{2 \cdot 9.807\text{ m/s}^2} = 20 \cdot 0.2039\text{ m} \approx 4.08\text{ m} h f , major = f D D L 2 g v 2 = 0.02 ⋅ 0.10 m 100 m ⋅ 2 ⋅ 9.807 m/s 2 ( 2.0 m/s ) 2 = 20 ⋅ 0.2039 m ≈ 4.08 m
Calculate total minor loss coefficient: ∑ K L = 4 ⋅ 0.75 + 0.15 = 3.15 \sum K_L = 4 \cdot 0.75 + 0.15 = 3.15 ∑ K L = 4 ⋅ 0.75 + 0.15 = 3.15
Compute minor head loss: h f , minor = ∑ K L v 2 2 g = 3.15 ⋅ ( 2.0 m/s ) 2 2 ⋅ 9.807 m/s 2 ≈ 0.64 m h_{f,\text{minor}} = \sum K_L \frac{v^2}{2g} = 3.15 \cdot \frac{(2.0\text{ m/s})^2}{2 \cdot 9.807\text{ m/s}^2} \approx 0.64\text{ m} h f , minor = ∑ K L 2 g v 2 = 3.15 ⋅ 2 ⋅ 9.807 m/s 2 ( 2.0 m/s ) 2 ≈ 0.64 m
Total head loss: h f = 4.08 m + 0.64 m = 4.72 m h_f = 4.08\text{ m} + 0.64\text{ m} = 4.72\text{ m} h f = 4.08 m + 0.64 m = 4.72 m
Required pump head: h p = 15 m + 4.72 m = 19.72 m h_p = 15\text{ m} + 4.72\text{ m} = 19.72\text{ m} h p = 15 m + 4.72 m = 19.72 m
Calculate the mass flow rate ( m ˙ \dot{m} m ˙ ): m ˙ = ρ A c v = 1000 kg/m 3 ⋅ [ π 4 ( 0.10 m ) 2 ] ⋅ 2.0 m/s ≈ 15.71 kg/s \dot{m} = \rho A_c v = 1000\text{ kg/m}^3 \cdot \left[ \frac{\pi}{4} (0.10\text{ m})^2 \right] \cdot 2.0\text{ m/s} \approx 15.71\text{ kg/s} m ˙ = ρ A c v = 1000 kg/m 3 ⋅ [ 4 π ( 0.10 m ) 2 ] ⋅ 2.0 m/s ≈ 15.71 kg/s
Compute pump shaft power ( W ˙ shaft \dot{W}_{\text{shaft}} W ˙ shaft ): W ˙ shaft = m ˙ g h p η = 15.71 kg/s ⋅ 9.807 m/s 2 ⋅ 19.72 m 0.75 = 3038.5 W 0.75 ≈ 4051 W = 4.05 kW \dot{W}_{\text{shaft}} = \frac{\dot{m} g h_p}{\eta} = \frac{15.71\text{ kg/s} \cdot 9.807\text{ m/s}^2 \cdot 19.72\text{ m}}{0.75} = \frac{3038.5\text{ W}}{0.75} \approx 4051\text{ W} = 4.05\text{ kW} W ˙ shaft = η m ˙ g h p = 0.75 15.71 kg/s ⋅ 9.807 m/s 2 ⋅ 19.72 m = 0.75 3038.5 W ≈ 4051 W = 4.05 kW
Worked Example 2: Packed Bed Pressure Drop
Problem: Air ( ρ = 1.2 kg/m 3 \rho = 1.2\text{ kg/m}^3 ρ = 1.2 kg/m 3 , μ = 1.8 × 10 − 5 Pa ⋅ s \mu = 1.8 \times 10^{-5}\text{ Pa}\cdot\text{s} μ = 1.8 × 1 0 − 5 Pa ⋅ s ) flows through a catalyst bed of length 2.0 m 2.0\text{ m} 2.0 m packed with spherical beads ( D p = 3.0 mm D_p = 3.0\text{ mm} D p = 3.0 mm , ϕ s = 1.0 \phi_s = 1.0 ϕ s = 1.0 ) at a superficial velocity of 0.05 m/s 0.05\text{ m/s} 0.05 m/s . The bed porosity is ϵ = 0.40 \epsilon = 0.40 ϵ = 0.40 . Assuming laminar flow dominates, calculate the pressure drop across the bed.
Solution:
First, check the particle Reynolds number to confirm laminar dominance: R e p = D p v o ρ μ ( 1 − ϵ ) = 0.003 m ⋅ 0.05 m/s ⋅ 1.2 kg/m 3 1.8 × 10 − 5 Pa ⋅ s ⋅ ( 1 − 0.40 ) = 0.00018 1.08 × 10 − 5 = 16.7 Re_p = \frac{D_p v_o \rho}{\mu (1-\epsilon)} = \frac{0.003\text{ m} \cdot 0.05\text{ m/s} \cdot 1.2\text{ kg/m}^3}{1.8 \times 10^{-5}\text{ Pa}\cdot\text{s} \cdot (1 - 0.40)} = \frac{0.00018}{1.08 \times 10^{-5}} = 16.7 R e p = μ ( 1 − ϵ ) D p v o ρ = 1.8 × 1 0 − 5 Pa ⋅ s ⋅ ( 1 − 0.40 ) 0.003 m ⋅ 0.05 m/s ⋅ 1.2 kg/m 3 = 1.08 × 1 0 − 5 0.00018 = 16.7
Since R e p Re_p R e p is relatively low, we use the full Ergun equation but note that the viscous term will be dominant. Let's calculate both terms to be precise: Viscous term: Δ P viscous L = 150 v o μ ( 1 − ϵ ) 2 D p 2 ϕ s 2 ϵ 3 = 150 ⋅ 0.05 ⋅ ( 1.8 × 10 − 5 ) ⋅ ( 1 − 0.40 ) 2 ( 0.003 ) 2 ⋅ ( 1.0 ) 2 ⋅ ( 0.40 ) 3 = 4.86 × 10 − 5 5.76 × 10 − 7 ≈ 84.38 Pa/m \text{Viscous term: } \frac{\Delta P_{\text{viscous}}}{L} = \frac{150 v_o \mu (1-\epsilon)^2}{D_p^2 \phi_s^2 \epsilon^3} = \frac{150 \cdot 0.05 \cdot (1.8 \times 10^{-5}) \cdot (1-0.40)^2}{(0.003)^2 \cdot (1.0)^2 \cdot (0.40)^3} = \frac{4.86 \times 10^{-5}}{5.76 \times 10^{-7}} \approx 84.38\text{ Pa/m} Viscous term: L Δ P viscous = D p 2 ϕ s 2 ϵ 3 150 v o μ ( 1 − ϵ ) 2 = ( 0.003 ) 2 ⋅ ( 1.0 ) 2 ⋅ ( 0.40 ) 3 150 ⋅ 0.05 ⋅ ( 1.8 × 1 0 − 5 ) ⋅ ( 1 − 0.40 ) 2 = 5.76 × 1 0 − 7 4.86 × 1 0 − 5 ≈ 84.38 Pa/m Inertial term: Δ P inertial L = 1.75 ρ v o 2 ( 1 − ϵ ) D p ϕ s ϵ 3 = 1.75 ⋅ 1.2 ⋅ ( 0.05 ) 2 ⋅ ( 1 − 0.40 ) 0.003 ⋅ 1.0 ⋅ ( 0.40 ) 3 = 0.00315 0.000192 ≈ 16.41 Pa/m \text{Inertial term: } \frac{\Delta P_{\text{inertial}}}{L} = \frac{1.75 \rho v_o^2 (1-\epsilon)}{D_p \phi_s \epsilon^3} = \frac{1.75 \cdot 1.2 \cdot (0.05)^2 \cdot (1-0.40)}{0.003 \cdot 1.0 \cdot (0.40)^3} = \frac{0.00315}{0.000192} \approx 16.41\text{ Pa/m} Inertial term: L Δ P inertial = D p ϕ s ϵ 3 1.75 ρ v o 2 ( 1 − ϵ ) = 0.003 ⋅ 1.0 ⋅ ( 0.40 ) 3 1.75 ⋅ 1.2 ⋅ ( 0.05 ) 2 ⋅ ( 1 − 0.40 ) = 0.000192 0.00315 ≈ 16.41 Pa/m
Total pressure drop per unit length: Δ P L = 84.38 + 16.41 = 100.79 Pa/m \frac{\Delta P}{L} = 84.38 + 16.41 = 100.79\text{ Pa/m} L Δ P = 84.38 + 16.41 = 100.79 Pa/m
Total pressure drop over the 2.0 m bed: Δ P = 100.79 Pa/m ⋅ 2.0 m ≈ 202 Pa \Delta P = 100.79\text{ Pa/m} \cdot 2.0\text{ m} \approx 202\text{ Pa} Δ P = 100.79 Pa/m ⋅ 2.0 m ≈ 202 Pa