Study guide

6.4 Compressible and Non-Newtonian Flows

NCEES Fundamentals of Engineering FE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Mathematics

1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error

2 Chapter 2: Probability and Statistics

2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control

3 Chapter 3: Engineering Sciences

3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws

4 Chapter 4: Materials Science

4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites

5 Chapter 5: Chemistry and Biology

5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics

6 Chapter 6: Fluid Mechanics and Dynamics

6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows

7 Chapter 7: Thermodynamics

7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing

8 Chapter 8: Material and Energy Balances

8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances

9 Chapter 9: Heat Transfer

9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design

10 Chapter 10: Mass Transfer and Separation

10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations

11 Chapter 11: Solids Handling

11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage

12 Chapter 12: Chemical Reaction Engineering

12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics

13 Chapter 13: Economics

13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even

14 Chapter 14: Process Design

14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design

15 Chapter 15: Process Control

15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware

16 Chapter 16: Safety, Health, and Environment

16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations

17 Chapter 17: Ethics and Professional Practice

17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability

6.4 Compressible and Non-Newtonian Flows

Key Takeaways Explain This Topic AI

Compressible flow analysis is required when the Mach number (Ma) is 0.3 or higher.

Sonic velocity (c) is the speed at which pressure disturbances propagate, calculated as c = sqrt(k R T) for an ideal gas.

Stagnation properties represent fluid states when flow is decelerated isentropically to zero velocity.

Choked flow occurs at a throat when Ma = 1; further reduction in downstream pressure does not increase mass flow rate.

Non-Newtonian fluids exhibit shear-dependent viscosities (power-law model) or threshold yield stresses (Bingham plastics).

Last updated: July 2026

Fundamentals of Compressible Flow

In compressible flow, fluid density ( ρ \rho ρ ) changes significantly in response to pressure changes. While liquids are treated as incompressible, gases exhibit compressible behavior when the flow velocity ( v v v ) is high. The standard threshold for compressible flow analysis is a Mach number ( M a Ma M a ) of 0.3 0.3 0.3 or higher: M a = v c Ma = \frac{v}{c} M a = c v ​

where c c c is the local speed of sound (sonic velocity). For flows where M a < 0.3 Ma < 0.3 M a < 0.3 , density variations are typically less than 5 % 5\% 5% , allowing the use of incompressible equations.

Sonic Velocity: The speed of sound represents the velocity at which small pressure disturbances propagate through a medium. For an ideal gas undergoing an isentropic process, the sonic velocity is: c = k R T = k R u T M c = \sqrt{k R T} = \sqrt{\frac{k R_u T}{M}} c = k RT ​ = M k R u ​ T ​ ​

where:

k = C p / C v k = C_p / C_v k = C p ​ / C v ​ is the ratio of specific heats (isentropic expansion coefficient), which is approximately 1.4 1.4 1.4 for diatomic gases like air and 1.3 1.3 1.3 for triatomic gases like carbon dioxide.

R R R is the specific gas constant ( R = R u / M R = R_u / M R = R u ​ / M , where R u = 8.314 J/(mol ⋅ K) R_u = 8.314\text{ J/(mol}\cdot\text{K)} R u ​ = 8.314 J/(mol ⋅ K) or 1545 ft ⋅ lb f /(slug ⋅ ∘ R) 1545\text{ ft}\cdot\text{lb}_f\text{/(slug}\cdot^\circ\text{R)} 1545 ft ⋅ lb f ​ /(slug ⋅ ∘ R) ).

T T T is the absolute temperature in Kelvin ( K \text{K} K ) or Rankine ( ∘ R ^\circ\text{R} ∘ R ).

M M M is the molecular weight of the gas.

Stagnation Properties: When a high-velocity gas stream is decelerated isentropically to zero velocity, its kinetic energy is converted into enthalpy, raising its temperature and pressure. The resulting states are called stagnation (or total) properties: T 0 T = 1 + k − 1 2 M a 2 \frac{T_0}{T} = 1 + \frac{k-1}{2} Ma^2 T T 0 ​ ​ = 1 + 2 k − 1 ​ M a 2 P 0 P = ( 1 + k − 1 2 M a 2 ) k k − 1 \frac{P_0}{P} = \left( 1 + \frac{k-1}{2} Ma^2 \right)^{\frac{k}{k-1}} P P 0 ​ ​ = ( 1 + 2 k − 1 ​ M a 2 ) k − 1 k ​

where T 0 T_0 T 0 ​ and P 0 P_0 P 0 ​ are the stagnation temperature and pressure, and T T T and P P P are the static temperature and pressure of the moving fluid.

Choked Flow: In a converging-diverging nozzle, if the pressure ratio across the nozzle is sufficiently large, the velocity at the throat (minimum area) reaches the speed of sound ( M a = 1 Ma = 1 M a = 1 ). Once this condition is met, the flow is 'choked,' and the mass flow rate through the nozzle reaches a maximum value that cannot be increased by further lowering the downstream receiver pressure. The critical pressure ratio for choked flow of an ideal gas is: P ∗ P 0 = ( 2 k + 1 ) k k − 1 \frac{P^*}{P_0} = \left( \frac{2}{k+1} \right)^{\frac{k}{k-1}} P 0 ​ P ∗ ​ = ( k + 1 2 ​ ) k − 1 k ​

For air ( k = 1.4 k = 1.4 k = 1.4 ), this ratio is 0.528 0.528 0.528 .

Rheology of Non-Newtonian Fluids

Non-Newtonian fluids do not obey Newton's law of viscosity; their shear stress ( τ \tau τ ) is not linearly proportional to the shear rate ( d v / d y dv/dy d v / d y ). Apparent viscosity depends on the applied shear rate and, in some cases, the duration of shearing.

Time-Independent Non-Newtonian Models:

The Power-Law Model (Ostwald-de Waele): This is the most common model used in the FE exam to describe shear-dependent viscosity: τ = K ( d v d y ) n \tau = K \left( \frac{dv}{dy} \right)^n τ = K ( d y d v ​ ) n

where K K K is the flow consistency index ( Pa ⋅ s n \text{Pa}\cdot\text{s}^n Pa ⋅ s n ) and n n n is the flow behavior index (dimensionless). The apparent viscosity ( η eff \eta_{\text{eff}} η eff ​ ) is: η eff = K ( d v d y ) n − 1 \eta_{\text{eff}} = K \left( \frac{dv}{dy} \right)^{n-1} η eff ​ = K ( d y d v ​ ) n − 1

Newtonian ( n = 1 n = 1 n = 1 ): Viscosity is constant and equal to K K K .

Pseudoplastic / Shear-Thinning ( n < 1 n < 1 n < 1 ): Viscosity decreases as shear rate increases. This behavior occurs because polymer chains or suspended particles align with the flow, reducing resistance. Examples include polymer solutions, ketchup, paper pulp, and paint.

Dilatant / Shear-Thickening ( n > 1 n > 1 n > 1 ): Viscosity increases as shear rate increases. This occurs in highly concentrated suspensions where particles collide and interlock under high shear. Examples include starch-water suspensions (oobleck) and quicksand.

Bingham Plastics: These fluids behave as solid bodies at low shear stress but flow as viscous fluids once the applied stress exceeds a threshold yield stress ( τ y \tau_y τ y ​ ): τ = τ y + μ p d v d y for τ > τ y \tau = \tau_y + \mu_p \frac{dv}{dy} \quad \text{for} \quad \tau > \tau_y τ = τ y ​ + μ p ​ d y d v ​ for τ > τ y ​

where μ p \mu_p μ p ​ is the plastic viscosity. Examples include toothpaste, sewage sludge, drilling muds, and mayonnaise.

Time-Dependent Non-Newtonian Models:

Thixotropic Fluids: Apparent viscosity decreases over time under constant shear stress (e.g., non-drip paints, honey).

Rheopectic Fluids: Apparent viscosity increases over time under constant shear stress (e.g., gypsum pastes).

Summary of Flow Models

  • Fluid Type Governing Stress Equation Viscosity Behavior
  • Newtonian τ = μ ( d v / d y ) \tau = \mu (dv/dy) τ = μ ( d v / d y ) Constant Apparent Viscosity

Power-Law ( n < 1 n < 1 n < 1 ) τ = K ( d v / d y ) n \tau = K (dv/dy)^n τ = K ( d v / d y ) n Shear-Thinning (Apparent Viscosity Decreases)

Power-Law ( n > 1 n > 1 n > 1 ) τ = K ( d v / d y ) n \tau = K (dv/dy)^n τ = K ( d v / d y ) n Shear-Thickening (Apparent Viscosity Increases)

Bingham Plastic τ = τ y + μ p ( d v / d y ) \tau = \tau_y + \mu_p (dv/dy) τ = τ y ​ + μ p ​ ( d v / d y ) Yield Stress Required Before Flow

Worked Example 1: Sonic Velocity and Mach Number

Problem: Carbon dioxide ( M = 44.01 g/mol M = 44.01\text{ g/mol} M = 44.01 g/mol , k = 1.30 k = 1.30 k = 1.30 ) flows through a pipeline at a temperature of 150 ∘ C 150^\circ\text{C} 15 0 ∘ C and a velocity of 180 m/s 180\text{ m/s} 180 m/s . Determine the speed of sound and the Mach number of the gas.

Solution:

First, convert the temperature to Kelvin: T = 150 + 273.15 = 423.15 K T = 150 + 273.15 = 423.15\text{ K} T = 150 + 273.15 = 423.15 K

Calculate the specific gas constant ( R R R ): R = R u M = 8.314 J/(mol ⋅ K) 0.04401 kg/mol ≈ 188.9 J/(kg ⋅ K) R = \frac{R_u}{M} = \frac{8.314\text{ J/(mol}\cdot\text{K)}}{0.04401\text{ kg/mol}} \approx 188.9\text{ J/(kg}\cdot\text{K)} R = M R u ​ ​ = 0.04401 kg/mol 8.314 J/(mol ⋅ K) ​ ≈ 188.9 J/(kg ⋅ K)

Calculate the speed of sound ( c c c ): c = k R T = 1.30 ⋅ 188.9 J/(kg ⋅ K) ⋅ 423.15 K = 103 , 912 m 2 /s 2 ≈ 322.4 m/s c = \sqrt{k R T} = \sqrt{1.30 \cdot 188.9\text{ J/(kg}\cdot\text{K)} \cdot 423.15\text{ K}} = \sqrt{103,912\text{ m}^2\text{/s}^2} \approx 322.4\text{ m/s} c = k RT ​ = 1.30 ⋅ 188.9 J/(kg ⋅ K) ⋅ 423.15 K ​ = 103 , 912 m 2 /s 2 ​ ≈ 322.4 m/s

Calculate the Mach number ( M a Ma M a ): M a = v c = 180 m/s 322.4 m/s ≈ 0.558 Ma = \frac{v}{c} = \frac{180\text{ m/s}}{322.4\text{ m/s}} \approx 0.558 M a = c v ​ = 322.4 m/s 180 m/s ​ ≈ 0.558

Since M a = 0.558 > 0.3 Ma = 0.558 > 0.3 M a = 0.558 > 0.3 , the flow must be modeled as compressible subsonic flow.

Worked Example 2: Effective Viscosity of a Power-Law Fluid

Problem: A polymer solution ( K = 2.5 Pa ⋅ s 0.6 K = 2.5\text{ Pa}\cdot\text{s}^{0.6} K = 2.5 Pa ⋅ s 0.6 , n = 0.6 n = 0.6 n = 0.6 ) is sheared in a rheometer at a shear rate of 150 s − 1 150\text{ s}^{-1} 150 s − 1 . Calculate the shear stress and the effective viscosity of the solution.

Solution:

Using the power-law equation, calculate the shear stress ( τ \tau τ ): τ = K ( d v d y ) n = 2.5 Pa ⋅ s 0.6 ⋅ ( 150 s − 1 ) 0.6 \tau = K \left( \frac{dv}{dy} \right)^n = 2.5\text{ Pa}\cdot\text{s}^{0.6} \cdot (150\text{ s}^{-1})^{0.6} τ = K ( d y d v ​ ) n = 2.5 Pa ⋅ s 0.6 ⋅ ( 150 s − 1 ) 0.6 τ = 2.5 ⋅ 20.31 ≈ 50.8 Pa \tau = 2.5 \cdot 20.31 \approx 50.8\text{ Pa} τ = 2.5 ⋅ 20.31 ≈ 50.8 Pa

Calculate the effective (apparent) viscosity ( η eff \eta_{\text{eff}} η eff ​ ): η eff = τ d v / d y = K ( d v d y ) n − 1 = 2.5 ⋅ ( 150 ) − 0.4 = 2.5 ⋅ 0.1354 ≈ 0.339 Pa ⋅ s \eta_{\text{eff}} = \frac{\tau}{dv/dy} = K \left( \frac{dv}{dy} \right)^{n-1} = 2.5\cdot (150)^{-0.4} = 2.5 \cdot 0.1354 \approx 0.339\text{ Pa}\cdot\text{s} η eff ​ = d v / d y τ ​ = K ( d y d v ​ ) n − 1 = 2.5 ⋅ ( 150 ) − 0.4 = 2.5 ⋅ 0.1354 ≈ 0.339 Pa ⋅ s

Note that the effective viscosity ( 0.339 Pa ⋅ s 0.339\text{ Pa}\cdot\text{s} 0.339 Pa ⋅ s ) is significantly lower than the consistency index K K K ( 2.5 2.5 2.5 ), demonstrating the shear-thinning behavior of the fluid.