Study guide
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes
Key Takeaways Explain This Topic AI
Density, specific gravity, specific weight, dynamic viscosity, and kinematic viscosity are fundamental point properties of fluids.
Newton's law of viscosity relates shear stress to dynamic viscosity and the velocity gradient perpendicular to the plane of shear.
The Reynolds number (Re) is the ratio of inertial to viscous forces and is the primary criterion for identifying flow regimes in pipes.
The Prandtl (Pr) and Schmidt (Sc) numbers represent ratios of momentum diffusivity to thermal and mass diffusivities, respectively.
Laminar pipe flow occurs at Re < 2100 with a parabolic velocity profile; turbulent pipe flow occurs at Re > 4000 with a flatter velocity profile.
Last updated: July 2026
Fluid Properties and the Continuum Hypothesis
In chemical engineering fluid mechanics, fluids (liquids and gases) are analyzed using the continuum hypothesis, which assumes that fluid properties vary continuously in space. This macromolecular treatment allows for the definition of point properties such as density ( ρ \rho ρ ), specific volume ( v v v ), specific weight ( γ \gamma γ ), and specific gravity ( S G SG SG ).
Density and Specific Volume: Density is defined as mass per unit volume ( ρ = m / V \rho = m/V ρ = m / V ). In SI units, it is expressed in kg/m 3 \text{kg/m}^3 kg/m 3 , and in U.S. Customary System (USCS) units, it is expressed in lb/ft 3 \text{lb/ft}^3 lb/ft 3 or slug/ft 3 \text{slug/ft}^3 slug/ft 3 . Specific volume is the reciprocal of density ( v = 1 / ρ v = 1/\rho v = 1/ ρ ), representing the volume occupied by a unit mass of fluid.
Specific Weight and Specific Gravity: Specific weight ( γ \gamma γ ) is the weight of a fluid per unit volume, related to density by γ = ρ g \gamma = \rho g γ = ρ g , where g g g is the local acceleration due to gravity ( 9.807 m/s 2 9.807\text{ m/s}^2 9.807 m/s 2 or 32.174 ft/s 2 32.174\text{ ft/s}^2 32.174 ft/s 2 ). Specific gravity ( S G SG SG ) is a dimensionless ratio of the fluid's density to the density of a reference fluid, typically pure water at 4 ∘ C 4^\circ\text{C} 4 ∘ C ( ρ ref = 1000 kg/m 3 \rho_{\text{ref}} = 1000\text{ kg/m}^3 ρ ref = 1000 kg/m 3 or 62.43 lb/ft 3 62.43\text{ lb/ft}^3 62.43 lb/ft 3 ) for liquids, and air at standard conditions for gases: S G = ρ ρ ref SG = \frac{\rho}{\rho_{\text{ref}}} SG = ρ ref ρ
Viscosity: Viscosity is a fluid's resistance to gradual deformation by shear stress. According to Newton's law of viscosity, for a Newtonian fluid in laminar, one-dimensional flow, the shear stress ( τ \tau τ ) is directly proportional to the velocity gradient perpendicular to the plane of shear: τ = μ d v d y \tau = \mu \frac{dv}{dy} τ = μ d y d v
where μ \mu μ is the dynamic (or absolute) viscosity, with SI units of Pa ⋅ s \text{Pa}\cdot\text{s} Pa ⋅ s or kg / ( m ⋅ s ) \text{kg}/(\text{m}\cdot\text{s}) kg / ( m ⋅ s ) (commonly reported in centipoise, cP \text{cP} cP , where 1 cP = 10 − 3 Pa ⋅ s 1\text{ cP} = 10^{-3}\text{ Pa}\cdot\text{s} 1 cP = 1 0 − 3 Pa ⋅ s ), and USCS units of lb ⋅ s/ft 2 \text{lb}\cdot\text{s/ft}^2 lb ⋅ s/ft 2 or slug / ( ft ⋅ s ) \text{slug}/(\text{ft}\cdot\text{s}) slug / ( ft ⋅ s ) . Kinematic viscosity ( ν \nu ν ) is the ratio of dynamic viscosity to density: ν = μ ρ \nu = \frac{\mu}{\rho} ν = ρ μ
with SI units of m 2 /s \text{m}^2\text{/s} m 2 /s (commonly reported in centistokes, cSt \text{cSt} cSt , where 1 cSt = 10 − 6 m 2 /s 1\text{ cSt} = 10^{-6}\text{ m}^2\text{/s} 1 cSt = 1 0 − 6 m 2 /s ) and USCS units of ft 2 /s \text{ft}^2\text{/s} ft 2 /s .
Surface Tension and Capillarity: Surface tension ( σ \sigma σ ) is the tensile force per unit length acting at the interface between two immiscible phases. This molecular cohesion leads to capillary action. The height ( h h h ) of capillary rise or depression in a circular tube of diameter d d d is given by: h = 4 σ cos θ ρ g d h = \frac{4\sigma\cos\theta}{\rho g d} h = ρ g d 4 σ cos θ
where θ \theta θ is the contact angle. For water on clean glass, θ ≈ 0 ∘ \theta \approx 0^\circ θ ≈ 0 ∘ (capillary rise), whereas for mercury on glass, θ ≈ 140 ∘ \theta \approx 140^\circ θ ≈ 14 0 ∘ (capillary depression).
Hydrostatic Pressure: Pressure ( P P P ) is the compressive force per unit area. Absolute pressure is measured relative to a perfect vacuum, whereas gauge pressure is measured relative to local atmospheric pressure: P abs = P gauge + P atm P_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}} P abs = P gauge + P atm
For an incompressible fluid at rest, the hydrostatic pressure difference between two elevations is: P 2 − P 1 = − ρ g ( z 2 − z 1 ) = ρ g h P_2 - P_1 = -\rho g (z_2 - z_1) = \rho g h P 2 − P 1 = − ρ g ( z 2 − z 1 ) = ρ g h
where h h h is the depth of the fluid.
Dimensionless Numbers in Transport Phenomena
Dimensionless groups characterize the relative importance of physical transport mechanisms. For the FE Chemical exam, three primary dimensionless numbers must be mastered:
Reynolds Number ( R e Re R e ): Represents the ratio of inertial forces to viscous forces. For flow in a circular pipe of diameter D D D with average velocity v v v : R e = D v ρ μ = D v ν Re = \frac{D v \rho}{\mu} = \frac{D v}{\nu} R e = μ D v ρ = ν D v
For non-circular ducts, the hydraulic diameter ( D H D_H D H ) is substituted for D D D : D H = 4 A c P w D_H = \frac{4 A_c}{P_w} D H = P w 4 A c
where A c A_c A c is the cross-sectional flow area and P w P_w P w is the wetted perimeter.
Prandtl Number ( P r Pr P r ): The ratio of momentum diffusivity (kinematic viscosity) to thermal diffusivity ( α = k / ρ C p \alpha = k / \rho C_p α = k / ρ C p ): P r = C p μ k = ν α Pr = \frac{C_p \mu}{k} = \frac{\nu}{\alpha} P r = k C p μ = α ν
It depends solely on fluid properties and governs the relative thickness of velocity and thermal boundary layers.
Schmidt Number ( S c Sc S c ): The ratio of momentum diffusivity to mass diffusivity ( D A B D_{AB} D A B ): S c = μ ρ D A B = ν D A B Sc = \frac{\mu}{\rho D_{AB}} = \frac{\nu}{D_{AB}} S c = ρ D A B μ = D A B ν
It characterizes the relative thickness of velocity and concentration boundary layers.
Péclet Number ( P e Pe P e ): Characterizes the ratio of advective transport to diffusive transport. For heat transfer, P e = R e ⋅ P r Pe = Re \cdot Pr P e = R e ⋅ P r ; for mass transfer, P e M = R e ⋅ S c Pe_M = Re \cdot Sc P e M = R e ⋅ S c .
Flow Regimes: Laminar vs. Turbulent Flow
The Reynolds number is the primary criterion for determining the flow regime. For internal flow in pipes:
Laminar Flow ( R e < 2100 Re < 2100 R e < 2100 ): Viscous forces dominate. Fluid flows in parallel, concentric streamlines with no macroscopic mixing. The velocity profile is parabolic: v ( r ) = v max [ 1 − ( r R ) 2 ] v(r) = v_{\text{max}} \left[ 1 - \left(\frac{r}{R}\right)^2 \right] v ( r ) = v max [ 1 − ( R r ) 2 ]
where the average velocity is exactly half the maximum velocity ( v avg = 0.5 v max v_{\text{avg}} = 0.5 v_{\text{max}} v avg = 0.5 v max ).
Transition Flow ( 2100 ≤ R e ≤ 4000 2100 \le Re \le 4000 2100 ≤ R e ≤ 4000 ): The flow is unstable and can oscillate between laminar and turbulent regimes.
Turbulent Flow ( R e > 4000 Re > 4000 R e > 4000 ): Inertial forces dominate. The flow is characterized by chaotic, three-dimensional eddy motions that enhance heat, mass, and momentum transfer. The velocity profile is flatter due to turbulent mixing, often modeled by the empirical one-seventh power-law: v ( r ) = v max ( 1 − r R ) 1 / 7 v(r) = v_{\text{max}} \left( 1 - \frac{r}{R} \right)^{1/7} v ( r ) = v max ( 1 − R r ) 1/7
where v avg ≈ 0.817 v max v_{\text{avg}} \approx 0.817 v_{\text{max}} v avg ≈ 0.817 v max .
Summary of Key Fluid Properties
Property Notation SI Units USCS Units Definition/Relation
Density ρ \rho ρ kg/m 3 \text{kg/m}^3 kg/m 3 lb/ft 3 \text{lb/ft}^3 lb/ft 3 or slug/ft 3 \text{slug/ft}^3 slug/ft 3 ρ = m / V \rho = m/V ρ = m / V
Dynamic Viscosity μ \mu μ Pa ⋅ s \text{Pa}\cdot\text{s} Pa ⋅ s lb ⋅ s/ft 2 \text{lb}\cdot\text{s/ft}^2 lb ⋅ s/ft 2 τ = μ ( d v / d y ) \tau = \mu (dv/dy) τ = μ ( d v / d y )
Kinematic Viscosity ν \nu ν m 2 /s \text{m}^2\text{/s} m 2 /s ft 2 /s \text{ft}^2\text{/s} ft 2 /s ν = μ / ρ \nu = \mu/\rho ν = μ / ρ
- Surface Tension σ \sigma σ N/m \text{N/m} N/m lb/ft \text{lb/ft} lb/ft Force per unit length
- Worked Example 1: Reynolds Number and Flow Regime Determination
Problem: A liquid hydrocarbon mixture ( S G = 0.82 SG = 0.82 SG = 0.82 , μ = 1.8 cP \mu = 1.8\text{ cP} μ = 1.8 cP ) flows through a rectangular duct of cross-section 15 cm × 30 cm 15\text{ cm} \times 30\text{ cm} 15 cm × 30 cm at a volumetric flow rate of 0.045 m 3 /s 0.045\text{ m}^3\text{/s} 0.045 m 3 /s . Determine the hydraulic diameter, the average velocity, and the flow regime.
Solution:
First, calculate the fluid density: ρ = S G ⋅ ρ water = 0.82 ⋅ 1000 kg/m 3 = 820 kg/m 3 \rho = SG \cdot \rho_{\text{water}} = 0.82 \cdot 1000\text{ kg/m}^3 = 820\text{ kg/m}^3 ρ = SG ⋅ ρ water = 0.82 ⋅ 1000 kg/m 3 = 820 kg/m 3
Convert viscosity to SI units: μ = 1.8 cP = 1.8 × 10 − 3 Pa ⋅ s = 1.8 × 10 − 3 kg / ( m ⋅ s ) \mu = 1.8\text{ cP} = 1.8 \times 10^{-3}\text{ Pa}\cdot\text{s} = 1.8 \times 10^{-3}\text{ kg}/(\text{m}\cdot\text{s}) μ = 1.8 cP = 1.8 × 1 0 − 3 Pa ⋅ s = 1.8 × 1 0 − 3 kg / ( m ⋅ s )
Calculate the cross-sectional area ( A c A_c A c ) and wetted perimeter ( P w P_w P w ): A c = 0.15 m × 0.30 m = 0.045 m 2 A_c = 0.15\text{ m} \times 0.30\text{ m} = 0.045\text{ m}^2 A c = 0.15 m × 0.30 m = 0.045 m 2 P w = 2 × ( 0.15 m + 0.30 m ) = 0.90 m P_w = 2 \times (0.15\text{ m} + 0.30\text{ m}) = 0.90\text{ m} P w = 2 × ( 0.15 m + 0.30 m ) = 0.90 m
Compute the hydraulic diameter ( D H D_H D H ): D H = 4 A c P w = 4 ⋅ 0.045 m 2 0.90 m = 0.20 m D_H = \frac{4 A_c}{P_w} = \frac{4 \cdot 0.045\text{ m}^2}{0.90\text{ m}} = 0.20\text{ m} D H = P w 4 A c = 0.90 m 4 ⋅ 0.045 m 2 = 0.20 m
Determine the average velocity ( v avg v_{\text{avg}} v avg ): v avg = Q A c = 0.045 m 3 /s 0.045 m 2 = 1.0 m/s v_{\text{avg}} = \frac{Q}{A_c} = \frac{0.045\text{ m}^3\text{/s}}{0.045\text{ m}^2} = 1.0\text{ m/s} v avg = A c Q = 0.045 m 2 0.045 m 3 /s = 1.0 m/s
Compute the Reynolds number ( R e Re R e ): R e = D H v avg ρ μ = 0.20 m ⋅ 1.0 m/s ⋅ 820 kg/m 3 1.8 × 10 − 3 kg / ( m ⋅ s ) = 91 , 111 Re = \frac{D_H v_{\text{avg}} \rho}{\mu} = \frac{0.20\text{ m} \cdot 1.0\text{ m/s} \cdot 820\text{ kg/m}^3}{1.8 \times 10^{-3}\text{ kg}/(\text{m}\cdot\text{s})} = 91,111 R e = μ D H v avg ρ = 1.8 × 1 0 − 3 kg / ( m ⋅ s ) 0.20 m ⋅ 1.0 m/s ⋅ 820 kg/m 3 = 91 , 111
Since R e = 91 , 111 > 4000 Re = 91,111 > 4000 R e = 91 , 111 > 4000 , the flow is highly turbulent.
Worked Example 2: Capillary Rise Calculation
Problem: Estimate the capillary rise of pure water at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C ( σ = 0.0728 N/m \sigma = 0.0728\text{ N/m} σ = 0.0728 N/m , θ ≈ 0 ∘ \theta \approx 0^\circ θ ≈ 0 ∘ ) in a glass tube with an internal diameter of 1.5 mm 1.5\text{ mm} 1.5 mm .
Solution:
Using the capillary rise formula: h = 4 σ cos θ ρ g d h = \frac{4\sigma\cos\theta}{\rho g d} h = ρ g d 4 σ cos θ
Substitute the given values ( ρ = 1000 kg/m 3 \rho = 1000\text{ kg/m}^3 ρ = 1000 kg/m 3 , g = 9.807 m/s 2 g = 9.807\text{ m/s}^2 g = 9.807 m/s 2 , d = 0.0015 m d = 0.0015\text{ m} d = 0.0015 m ): h = 4 ⋅ ( 0.0728 N/m ) ⋅ cos ( 0 ∘ ) ( 1000 kg/m 3 ) ⋅ ( 9.807 m/s 2 ) ⋅ ( 0.0015 m ) = 0.2912 14.71 ≈ 0.0198 m = 19.8 mm h = \frac{4 \cdot (0.0728\text{ N/m}) \cdot \cos(0^\circ)}{(1000\text{ kg/m}^3) \cdot (9.807\text{ m/s}^2) \cdot (0.0015\text{ m})} = \frac{0.2912}{14.71} \approx 0.0198\text{ m} = 19.8\text{ mm} h = ( 1000 kg/m 3 ) ⋅ ( 9.807 m/s 2 ) ⋅ ( 0.0015 m ) 4 ⋅ ( 0.0728 N/m ) ⋅ cos ( 0 ∘ ) = 14.71 0.2912 ≈ 0.0198 m = 19.8 mm