Study guide

10.1 Diffusion Fundamentals

NCEES Fundamentals of Engineering FE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Mathematics

1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error

2 Chapter 2: Probability and Statistics

2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control

3 Chapter 3: Engineering Sciences

3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws

4 Chapter 4: Materials Science

4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites

5 Chapter 5: Chemistry and Biology

5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics

6 Chapter 6: Fluid Mechanics and Dynamics

6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows

7 Chapter 7: Thermodynamics

7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing

8 Chapter 8: Material and Energy Balances

8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances

9 Chapter 9: Heat Transfer

9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design

10 Chapter 10: Mass Transfer and Separation

10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations

11 Chapter 11: Solids Handling

11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage

12 Chapter 12: Chemical Reaction Engineering

12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics

13 Chapter 13: Economics

13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even

14 Chapter 14: Process Design

14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design

15 Chapter 15: Process Control

15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware

16 Chapter 16: Safety, Health, and Environment

16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations

17 Chapter 17: Ethics and Professional Practice

17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability

10.1 Diffusion Fundamentals

Key Takeaways Explain This Topic AI

Fick's first law relates diffusion flux to concentration gradient, where molar flux relative to stationary coordinates is N A = J A + x A ( N A + N B ) N_A = J_A + x_A(N_A + N_B) N A ​ = J A ​ + x A ​ ( N A ​ + N B ​ ) .

Equimolar counterdiffusion (EMD) occurs when N A = − N B N_A = -N_B N A ​ = − N B ​ , whereas unimolar diffusion (UMD) occurs through a stagnant phase ( N B = 0 N_B = 0 N B ​ = 0 ).

Diffusivity in gases is estimated by the Fuller-Schettler-Giddings equation ( D A B ∝ T 1.75 P − 1 D_{AB} \propto T^{1.75} P^{-1} D A B ​ ∝ T 1.75 P − 1 ), and in liquids by the Wilke-Chang correlation ( D A B ∝ T η B − 1 D_{AB} \propto T \eta_B^{-1} D A B ​ ∝ T η B − 1 ​ ).

Film theory assumes mass transfer resistance lies in a thin stagnant film, predicting the mass transfer coefficient is directly proportional to diffusivity ( k c ∝ D A B k_c \propto D_{AB} k c ​ ∝ D A B ​ ).

The Schmidt number ( S c = μ / ( ρ D A B ) Sc = \mu / (\rho D_{AB}) S c = μ / ( ρ D A B ​ ) ) and Sherwood number ( S h = k c L / D A B Sh = k_c L / D_{AB} S h = k c ​ L / D A B ​ ) are key dimensionless groups used to correlate mass transfer data.

Last updated: July 2026

10.1 Diffusion Fundamentals

In chemical engineering, mass transfer describes the transport of species from a region of high concentration to a region of low concentration, driven by a chemical potential gradient. The FE Reference Handbook presents mass transfer in two primary regimes: molecular diffusion (governed by Fick's laws) and convective mass transfer (characterized by mass transfer coefficients). Understanding these fundamentals is crucial for solving column sizing, reaction kinetics, and separation process problems on the FE Chemical exam.

Fick's First Law of Molecular Diffusion

Molar diffusion is the thermal motion of molecules in a fluid. For a binary system of components A A A and B B B , Fick's first law relates the molar diffusion flux of species A A A to its concentration gradient. The molar flux relative to the molar average velocity of the mixture, denoted as J A ∗ J_A^* J A ∗ ​ (in kmol / ( m 2 ⋅ s ) \text{kmol}/(\text{m}^2\cdot\text{s}) kmol / ( m 2 ⋅ s ) or mol / ( m 2 ⋅ s ) \text{mol}/(\text{m}^2\cdot\text{s}) mol / ( m 2 ⋅ s ) ), is given by: J A ∗ = − C D A B ∇ x A J_{A}^* = -C D_{AB} \nabla x_A J A ∗ ​ = − C D A B ​ ∇ x A ​

In one dimension ( z z z -direction), for a constant total molar concentration C C C (in mol / m 3 \text{mol}/\text{m}^3 mol / m 3 ), this simplifies to: J A z = − D A B d C A d z J_{Az} = -D_{AB} \frac{dC_A}{dz} J A z ​ = − D A B ​ d z d C A ​ ​

Where:

J A z J_{Az} J A z ​ is the molar flux of A A A in the z z z -direction relative to the average velocity ( mol / ( m 2 ⋅ s ) \text{mol}/(\text{m}^2\cdot\text{s}) mol / ( m 2 ⋅ s ) ).

D A B D_{AB} D A B ​ is the molecular diffusivity of A A A in B B B ( m 2 / s \text{m}^2/\text{s} m 2 / s ).

C A C_A C A ​ is the molar concentration of species A A A ( mol / m 3 \text{mol}/\text{m}^3 mol / m 3 ).

z z z is the diffusion distance ( m \text{m} m ).

General Mass Transfer Equation

In practical engineering systems, bulk fluid motion also contributes to mass transfer. The absolute molar flux of A A A relative to a stationary coordinate system ( N A N_A N A ​ ) is the sum of diffusion flux ( J A J_A J A ​ ) and convective flux resulting from bulk fluid flow: N A = J A + x A ( N A + N B ) = − C D A B d x A d z + x A ( N A + N B ) N_A = J_A + x_A (N_A + N_B) = -C D_{AB} \frac{dx_A}{dz} + x_A (N_A + N_B) N A ​ = J A ​ + x A ​ ( N A ​ + N B ​ ) = − C D A B ​ d z d x A ​ ​ + x A ​ ( N A ​ + N B ​ )

Where:

N A N_A N A ​ is the total molar flux of A A A relative to a fixed coordinate ( mol / ( m 2 ⋅ s ) \text{mol}/(\text{m}^2\cdot\text{s}) mol / ( m 2 ⋅ s ) ).

N B N_B N B ​ is the total molar flux of B B B relative to a fixed coordinate ( mol / ( m 2 ⋅ s ) \text{mol}/(\text{m}^2\cdot\text{s}) mol / ( m 2 ⋅ s ) ).

x A x_A x A ​ is the mole fraction of component A A A ( C A / C C_A/C C A ​ / C ).

Two limiting cases frequently appear on the FE Chemical exam:

1. Equimolar Counterdiffusion (EMD)

In EMD, components A A A and B B B diffuse in opposite directions at equal molar rates, typically seen in binary distillation of components with equal latent heats. Under these conditions, N A = − N B N_A = -N_B N A ​ = − N B ​ . Consequently, the convective term vanishes: N A = J A = − D A B d C A d z N_A = J_A = -D_{AB} \frac{dC_A}{dz} N A ​ = J A ​ = − D A B ​ d z d C A ​ ​

For gas phases obeying the ideal gas law ( C = P / ( R T ) C = P/(RT) C = P / ( RT ) ), integrating over a distance z = z 2 − z 1 z = z_2 - z_1 z = z 2 ​ − z 1 ​ yields: N A = D A B R T z ( p A 1 − p A 2 ) N_A = \frac{D_{AB}}{R T z} (p_{A1} - p_{A2}) N A ​ = RT z D A B ​ ​ ( p A 1 ​ − p A 2 ​ )

Where p A 1 p_{A1} p A 1 ​ and p A 2 p_{A2} p A 2 ​ are the partial pressures of A A A at positions 1 and 2, R R R is the universal gas constant, and T T T is absolute temperature.

2. Unimolar Diffusion (UMD) / Diffusion of A through Stagnant B

Here, component A A A diffuses while component B B B remains stationary relative to the boundary ( N B = 0 N_B = 0 N B ​ = 0 ). An example is the evaporation of a liquid solvent into a stagnant gas stream. Setting N B = 0 N_B = 0 N B ​ = 0 in the general flux equation yields: N A = − C D A B d x A d z + x A N A ⟹ N A ( 1 − x A ) = − C D A B d x A d z N_A = -C D_{AB} \frac{dx_A}{dz} + x_A N_A \implies N_A (1 - x_A) = -C D_{AB} \frac{dx_A}{dz} N A ​ = − C D A B ​ d z d x A ​ ​ + x A ​ N A ​ ⟹ N A ​ ( 1 − x A ​ ) = − C D A B ​ d z d x A ​ ​

Integrating from z 1 z_1 z 1 ​ to z 2 z_2 z 2 ​ yields: N A = D A B C z ln ⁡ ( 1 − x A 2 1 − x A 1 ) N_A = \frac{D_{AB} C}{z} \ln \left( \frac{1 - x_{A2}}{1 - x_{A1}} \right) N A ​ = z D A B ​ C ​ ln ( 1 − x A 1 ​ 1 − x A 2 ​ ​ )

For gas phase diffusion, this is expressed using partial pressures and the log-mean partial pressure of stagnant component B B B ( p B M p_{BM} p BM ​ ): N A = D A B P R T z p B M ( p A 1 − p A 2 ) N_A = \frac{D_{AB} P}{R T z p_{BM}} (p_{A1} - p_{A2}) N A ​ = RT z p BM ​ D A B ​ P ​ ( p A 1 ​ − p A 2 ​ )

Where the log-mean partial pressure of B B B is defined as: p B M = p B 2 − p B 1 ln ⁡ ( p B 2 / p B 1 ) p_{BM} = \frac{p_{B2} - p_{B1}}{\ln(p_{B2}/p_{B1})} p BM ​ = ln ( p B 2 ​ / p B 1 ​ ) p B 2 ​ − p B 1 ​ ​

Fick's Second Law of Diffusion

Fick's second law describes unsteady-state (transient) diffusion where concentration changes over time. In one dimension, it is represented as: ∂ C A ∂ t = D A B ∂ 2 C A ∂ z 2 \frac{\partial C_A}{\partial t} = D_{AB} \frac{\partial^2 C_A}{\partial z^2} ∂ t ∂ C A ​ ​ = D A B ​ ∂ z 2 ∂ 2 C A ​ ​

For diffusion into a semi-infinite medium ( z ≥ 0 z \ge 0 z ≥ 0 ) with a constant surface concentration C A s C_{As} C A s ​ and an initial uniform concentration C A 0 C_{A0} C A 0 ​ , the analytical solution is: C A ( z , t ) − C A 0 C A s − C A 0 = 1 − erf ( z 2 D A B t ) \frac{C_A(z,t) - C_{A0}}{C_{As} - C_{A0}} = 1 - \text{erf}\left(\frac{z}{2\sqrt{D_{AB} t}}\right) C A s ​ − C A 0 ​ C A ​ ( z , t ) − C A 0 ​ ​ = 1 − erf ( 2 D A B ​ t ​ z ​ )

Where erf ( x ) \text{erf}(x) erf ( x ) is the error function, which is tabulated in the Mathematics section of the FE Reference Handbook.

Diffusivity Estimation in Gases and Liquids

Molecular diffusivity is a transport property that depends on temperature, pressure, molecular structure, and solvent characteristics.

Gas Diffusivity ( D A B D_{AB} D A B ​ )

The FE Handbook details the Fuller-Schettler-Giddings (FSG) correlation for binary gas systems at low pressures: D A B = 0.00143 T 1.75 P M A B 1 / 2 [ ( Σ v ) A 1 / 3 + ( Σ v ) B 1 / 3 ] 2 D_{AB} = \frac{0.00143 T^{1.75}}{P M_{AB}^{1/2} [(\Sigma v)_A^{1/3} + (\Sigma v)_B^{1/3}]^2} D A B ​ = P M A B 1/2 ​ [( Σ v ) A 1/3 ​ + ( Σ v ) B 1/3 ​ ] 2 0.00143 T 1.75 ​

Where:

D A B D_{AB} D A B ​ is in cm 2 / s \text{cm}^2/\text{s} cm 2 / s .

T T T is in Kelvin ( K \text{K} K ).

P P P is pressure in bar.

M A B = 2 1 / M A + 1 / M B M_{AB} = \frac{2}{1/M_A + 1/M_B} M A B ​ = 1/ M A ​ + 1/ M B ​ 2 ​ is the effective molecular weight.

Σ v \Sigma v Σ v is the diffusion volume of each component (sum of atomic volumes, found in reference tables).

Exam Tip: Note the proportionalities: D A B ∝ T 1.75 D_{AB} \propto T^{1.75} D A B ​ ∝ T 1.75 and D A B ∝ P − 1 D_{AB} \propto P^{-1} D A B ​ ∝ P − 1 . If a gas diffusivity is given at one temperature and pressure, you can quickly estimate it at another using: D A B , 2 = D A B , 1 ( T 2 T 1 ) 1.75 ( P 1 P 2 ) D_{AB,2} = D_{AB,1} \left(\frac{T_2}{T_1}\right)^{1.75} \left(\frac{P_1}{P_2}\right) D A B , 2 ​ = D A B , 1 ​ ( T 1 ​ T 2 ​ ​ ) 1.75 ( P 2 ​ P 1 ​ ​ )

Liquid Diffusivity ( D A B D_{AB} D A B ​ )

For dilute solutes in liquids, the Wilke-Chang correlation is widely used: D A B = 7.4 × 10 − 8 ( Φ M B ) 1 / 2 T η B V A 0.6 D_{AB} = \frac{7.4 \times 10^{-8} (\Phi M_B)^{1/2} T}{\eta_B V_A^{0.6}} D A B ​ = η B ​ V A 0.6 ​ 7.4 × 1 0 − 8 ( Φ M B ​ ) 1/2 T ​

Where:

D A B D_{AB} D A B ​ is diffusivity ( cm 2 / s \text{cm}^2/\text{s} cm 2 / s ).

Φ \Phi Φ is the association parameter of the solvent B B B (water = 2.6, methanol = 1.9, ethanol = 1.5, unassociated = 1.0).

M B M_B M B ​ is the molecular weight of solvent B B B .

T T T is absolute temperature ( K \text{K} K ).

η B \eta_B η B ​ is the viscosity of solvent B B B in centipoise ( cP \text{cP} cP or mPa ⋅ s \text{mPa}\cdot\text{s} mPa ⋅ s ).

V A V_A V A ​ is the molar volume of solute A A A at its normal boiling point ( cm 3 / mol \text{cm}^3/\text{mol} cm 3 / mol ).

Exam Tip: In liquids, D A B ∝ T / η B D_{AB} \propto T/\eta_B D A B ​ ∝ T / η B ​ . Since viscosity decreases exponentially with temperature, liquid diffusivity increases much more rapidly with temperature than gas diffusivity.

Convective Mass Transfer & Film Theory

When fluid flows past a surface, mass transfer occurs via convective transport. The molar flux is written using a convective mass transfer coefficient, k c k_c k c ​ (in m / s \text{m}/\text{s} m / s ): N A = k c ( C A s − C A b ) N_A = k_c (C_{As} - C_{Ab}) N A ​ = k c ​ ( C A s ​ − C A b ​ )

Where C A s C_{As} C A s ​ is the concentration at the interface (surface) and C A b C_{Ab} C A b ​ is the bulk concentration.

Film Theory

Whitman's Film Theory assumes a thin, stagnant laminar film of thickness δ \delta δ adjacent to the phase boundary. All resistance to mass transfer is assumed to lie within this film, where transport is purely by molecular diffusion. Thus, comparing Fick's law and the convective flux equation: k c = D A B δ k_c = \frac{D_{AB}}{\delta} k c ​ = δ D A B ​ ​

Under this theory, k c k_c k c ​ is directly proportional to the molecular diffusivity ( k c ∝ D A B 1 k_c \propto D_{AB}^1 k c ​ ∝ D A B 1 ​ ). Other theories (such as Boundary Layer Theory, where k c ∝ D A B 2 / 3 k_c \propto D_{AB}^{2/3} k c ​ ∝ D A B 2/3 ​ , or Penetration/Surface Renewal Theory, where k c ∝ D A B 0.5 k_c \propto D_{AB}^{0.5} k c ​ ∝ D A B 0.5 ​ ) predict different relationships, which is a frequent concept-based exam question.

Interphase Mass Transfer (Two-Film Theory)

For transport across gas-liquid interfaces, resistances in both phases must be summed. Assuming local equilibrium at the interface ( y i = m x i y_i = m x_i y i ​ = m x i ​ ), the overall mass transfer coefficients K y K_y K y ​ and K x K_x K x ​ relate to individual film coefficients k y k_y k y ​ and k x k_x k x ​ by: 1 K y = 1 k y + m k x \frac{1}{K_y} = \frac{1}{k_y} + \frac{m}{k_x} K y ​ 1 ​ = k y ​ 1 ​ + k x ​ m ​ 1 K x = 1 k x + 1 m k y \frac{1}{K_x} = \frac{1}{k_x} + \frac{1}{m k_y} K x ​ 1 ​ = k x ​ 1 ​ + m k y ​ 1 ​

Where m m m is the slope of the equilibrium curve ( y ∗ = m x y^* = m x y ∗ = m x ). If m ≫ 1 m \gg 1 m ≫ 1 (highly insoluble gas), the liquid film resistance dominates ( 1 K x ≈ 1 k x \frac{1}{K_x} \approx \frac{1}{k_x} K x ​ 1 ​ ≈ k x ​ 1 ​ ). If m ≪ 1 m \ll 1 m ≪ 1 (highly soluble gas), the gas film resistance dominates ( 1 K y ≈ 1 k y \frac{1}{K_y} \approx \frac{1}{k_y} K y ​ 1 ​ ≈ k y ​ 1 ​ ).

Dimensionless Groups in Mass Transfer

Dimensionless groups correlate mass transfer data and establish analogies to heat and momentum transport.

Dimensionless Group Definition Physical Interpretation Heat/Momentum Analogy

Schmidt Number ( S c Sc S c ) S c = μ ρ D A B = ν D A B Sc = \frac{\mu}{\rho D_{AB}} = \frac{\nu}{D_{AB}} S c = ρ D A B ​ μ ​ = D A B ​ ν ​ Momentum diffusivity / Mass diffusivity Prandtl Number ( P r = ν α Pr = \frac{\nu}{\alpha} P r = α ν ​ )

Sherwood Number ( S h Sh S h ) S h = k c L D A B Sh = \frac{k_c L}{D_{AB}} S h = D A B ​ k c ​ L ​ Total mass transfer / Molecular diffusion Nusselt Number ( N u = h L k Nu = \frac{h L}{k} N u = k h L ​ )

Lewis Number ( L e Le L e ) L e = α D A B = S c P r Le = \frac{\alpha}{D_{AB}} = \frac{Sc}{Pr} L e = D A B ​ α ​ = P r S c ​ Thermal diffusivity / Mass diffusivity Ratio of thermal to concentration boundary layer thickness

Peclet Number ( P e M Pe_M P e M ​ ) P e M = R e ⋅ S c = v L D A B Pe_M = Re \cdot Sc = \frac{v L}{D_{AB}} P e M ​ = R e ⋅ S c = D A B ​ vL ​ Bulk convective transport / Molecular diffusion Thermal Peclet Number ( P e H = R e ⋅ P r Pe_H = Re \cdot Pr P e H ​ = R e ⋅ P r )

Worked Example: Diffusion of Water Vapor (UMD)

Problem: Water at 298 K 298\text{ K} 298 K is evaporating from the bottom of a 10 cm 10\text{ cm} 10 cm deep vertical tube into dry air ( y A 2 = 0 y_{A2} = 0 y A 2 ​ = 0 ) flowing across the top. The total pressure is 1.0 bar 1.0\text{ bar} 1.0 bar . The vapor pressure of water at 298 K 298\text{ K} 298 K is 0.0317 bar 0.0317\text{ bar} 0.0317 bar . The molecular diffusivity of water in air is D A B = 0.26 × 10 − 4 m 2 / s D_{AB} = 0.26 \times 10^{-4}\text{ m}^2/\text{s} D A B ​ = 0.26 × 1 0 − 4 m 2 / s . Compute the steady-state molar flux of water vapor in mol / ( m 2 ⋅ s ) \text{mol}/(\text{m}^2\cdot\text{s}) mol / ( m 2 ⋅ s ) .

Solution: This is a classic case of Unimolar Diffusion (UMD) because air (component B B B ) is stagnant inside the tube ( N B = 0 N_B = 0 N B ​ = 0 ).

Let A A A represent water and B B B represent air.

At the liquid surface (position 1): p A 1 = p v a p = 0.0317 bar p_{A1} = p_{vap} = 0.0317\text{ bar} p A 1 ​ = p v a p ​ = 0.0317 bar p B 1 = P − p A 1 = 1.0 − 0.0317 = 0.9683 bar p_{B1} = P - p_{A1} = 1.0 - 0.0317 = 0.9683\text{ bar} p B 1 ​ = P − p A 1 ​ = 1.0 − 0.0317 = 0.9683 bar

At the top of the tube (position 2): p A 2 = 0 bar p_{A2} = 0\text{ bar} p A 2 ​ = 0 bar p B 2 = P − p A 2 = 1.0 − 0 = 1.0 bar p_{B2} = P - p_{A2} = 1.0 - 0 = 1.0\text{ bar} p B 2 ​ = P − p A 2 ​ = 1.0 − 0 = 1.0 bar

Calculate the log-mean partial pressure of stagnant air ( p B M p_{BM} p BM ​ ): p B M = p B 2 − p B 1 ln ⁡ ( p B 2 / p B 1 ) = 1.0 − 0.9683 ln ⁡ ( 1.0 / 0.9683 ) = 0.0317 ln ⁡ ( 1.03273 ) = 0.0317 0.0322 = 0.9841 bar p_{BM} = \frac{p_{B2} - p_{B1}}{\ln(p_{B2}/p_{B1})} = \frac{1.0 - 0.9683}{\ln(1.0/0.9683)} = \frac{0.0317}{\ln(1.03273)} = \frac{0.0317}{0.0322} = 0.9841\text{ bar} p BM ​ = ln ( p B 2 ​ / p B 1 ​ ) p B 2 ​ − p B 1 ​ ​ = ln ( 1.0/0.9683 ) 1.0 − 0.9683 ​ = ln ( 1.03273 ) 0.0317 ​ = 0.0322 0.0317 ​ = 0.9841 bar

Now, apply the UMD flux equation: N A = D A B P R T z p B M ( p A 1 − p A 2 ) N_A = \frac{D_{AB} P}{R T z p_{BM}} (p_{A1} - p_{A2}) N A ​ = RT z p BM ​ D A B ​ P ​ ( p A 1 ​ − p A 2 ​ )

Substitute the known parameters in SI units:

D A B = 0.26 × 10 − 4 m 2 / s D_{AB} = 0.26 \times 10^{-4}\text{ m}^2/\text{s} D A B ​ = 0.26 × 1 0 − 4 m 2 / s

P = 1.0 × 10 5 Pa P = 1.0 \times 10^5\text{ Pa} P = 1.0 × 1 0 5 Pa

p A 1 − p A 2 = 0.0317 × 10 5 Pa p_{A1} - p_{A2} = 0.0317 \times 10^5\text{ Pa} p A 1 ​ − p A 2 ​ = 0.0317 × 1 0 5 Pa

  • p B M = 0.9841 × 10 5 Pa p_{BM} = 0.9841 \times 10^5\text{ Pa} p BM ​ = 0.9841 × 1 0 5 Pa
  • R = 8.314 J / ( mol ⋅ K ) R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) R = 8.314 J / ( mol ⋅ K )
  • T = 298 K T = 298\text{ K} T = 298 K

z = 0.10 m z = 0.10\text{ m} z = 0.10 m N A = ( 0.26 × 10 − 4 m 2 / s ) ( 1.0 × 10 5 Pa ) ( 8.314 J / ( mol ⋅ K ) ) ( 298 K ) ( 0.10 m ) ( 0.9841 × 10 5 Pa ) ⋅ ( 0.0317 × 10 5 Pa ) N_A = \frac{(0.26 \times 10^{-4}\text{ m}^2/\text{s}) (1.0 \times 10^5\text{ Pa})}{(8.314\text{ J}/(\text{mol}\cdot\text{K})) (298\text{ K}) (0.10\text{ m}) (0.9841 \times 10^5\text{ Pa})} \cdot (0.0317 \times 10^5\text{ Pa}) N A ​ = ( 8.314 J / ( mol ⋅ K )) ( 298 K ) ( 0.10 m ) ( 0.9841 × 1 0 5 Pa ) ( 0.26 × 1 0 − 4 m 2 / s ) ( 1.0 × 1 0 5 Pa ) ​ ⋅ ( 0.0317 × 1 0 5 Pa )

Notice that the pressure terms cancel out: N A = ( 0.26 × 10 − 4 ) ( 1.0 ) ( 8.314 ) ( 298 ) ( 0.10 ) ( 0.9841 ) ⋅ ( 3170 ) = 0.08242 243.83 ≈ 3.38 × 10 − 4 mol / ( m 2 ⋅ s ) N_A = \frac{(0.26 \times 10^{-4}) (1.0)}{(8.314) (298) (0.10) (0.9841)} \cdot (3170) = \frac{0.08242}{243.83} \approx 3.38 \times 10^{-4}\text{ mol}/(\text{m}^2\cdot\text{s}) N A ​ = ( 8.314 ) ( 298 ) ( 0.10 ) ( 0.9841 ) ( 0.26 × 1 0 − 4 ) ( 1.0 ) ​ ⋅ ( 3170 ) = 243.83 0.08242 ​ ≈ 3.38 × 1 0 − 4 mol / ( m 2 ⋅ s )

Thus, the evaporation rate of water is 3.38 × 10 − 4 mol / ( m 2 ⋅ s ) 3.38 \times 10^{-4}\text{ mol}/(\text{m}^2\cdot\text{s}) 3.38 × 1 0 − 4 mol / ( m 2 ⋅ s ) .