Study guide
10.3 Distillation and McCabe-Thiele Method
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
10.3 Distillation and McCabe-Thiele Method
Key Takeaways Explain This Topic AI
Relative volatility α \alpha α measures the ease of distillation, where α = 1.0 \alpha = 1.0 α = 1.0 indicates an azeotrope where no separation is possible.
The McCabe-Thiele method assumes Constant Molar Overflow (CMO), meaning molar latent heats are equal and liquid/vapor rates are constant in each section.
The feed q-line slope is q / ( q − 1 ) q/(q-1) q / ( q − 1 ) , representing thermal states: vertical for saturated liquid ( q = 1 q=1 q = 1 ) and horizontal for saturated vapor ( q = 0 q=0 q = 0 ).
Total reflux ( R = ∞ R = \infty R = ∞ ) yields the minimum number of stages ( N min N_{\min} N m i n ), which can be calculated using the Fenske equation.
Minimum reflux ( R min R_{\min} R m i n ) occurs when operating lines touch the equilibrium curve at a pinch point, requiring an infinite number of stages.
Last updated: July 2026
10.3 Distillation and McCabe-Thiele Method
Distillation is the most common industrial separation process, separating components based on differences in vapor pressure (volatility). Binary distillation involves a feed containing two components. The FE Chemical exam extensively tests the McCabe-Thiele graphical method, including operating lines, feed conditions, reflux ratios, minimum stages (Fenske equation), and efficiency calculations.
Vapor-Liquid Equilibrium (VLE)
The ease of separation by distillation is characterized by the relative volatility α A B \alpha_{AB} α A B , defined as the ratio of the distribution coefficients of the two components: α A B = y A / x A y B / x B = y ( 1 − x ) x ( 1 − y ) \alpha_{AB} = \frac{y_A / x_A}{y_B / x_B} = \frac{y (1 - x)}{x (1 - y)} α A B = y B / x B y A / x A = x ( 1 − y ) y ( 1 − x )
Where y y y and x x x represent the mole fractions of the more volatile component (light key) in the vapor and liquid phases, respectively. Solving for y y y yields the equilibrium curve equation: y = α x 1 + ( α − 1 ) x y = \frac{\alpha x}{1 + (\alpha - 1) x} y = 1 + ( α − 1 ) x αx
A larger relative volatility ( α ≫ 1 \alpha \gg 1 α ≫ 1 ) results in a wider gap between the equilibrium curve and the y = x y = x y = x diagonal line, indicating that fewer stages are required for separation. If α = 1 \alpha = 1 α = 1 , no separation is possible (azeotrope).
The McCabe-Thiele Graphical Method
The McCabe-Thiele method simplifies column design by assuming Constant Molar Overflow (CMO) . Under CMO:
The molar latent heats of vaporization of both components are approximately equal.
Sensible heat changes, heat of mixing, and heat losses (adiabatic column) are negligible.
As a result, the molar flow rate of liquid ( L L L ) and vapor ( V V V ) are constant in the rectifying section, and the liquid ( L ˉ \bar{L} L ˉ ) and vapor ( V ˉ \bar{V} V ˉ ) flow rates are constant in the stripping section. This allows operating lines to be plotted as straight lines on a y - x y\text{-}x y - x diagram.
Rectifying Section Operating Line (ROL)
The rectifying section is the portion of the column above the feed tray. A mass balance around the condenser and a stage in this section gives: y = R R + 1 x + x D R + 1 y = \frac{R}{R+1} x + \frac{x_D}{R+1} y = R + 1 R x + R + 1 x D
Where:
R = L / D R = L/D R = L / D is the reflux ratio (ratio of reflux liquid to distillate product).
x D x_D x D is the distillate mole fraction of the light key.
The slope of the ROL is R R + 1 \frac{R}{R+1} R + 1 R and its y y y -intercept is x D R + 1 \frac{x_D}{R+1} R + 1 x D . The ROL intersects the y = x y = x y = x diagonal line at the point ( x D , x D ) (x_D, x_D) ( x D , x D ) .
Stripping Section Operating Line (SOL)
The stripping section is the portion of the column below the feed tray. A mass balance around the reboiler and a stage in this section gives: y = L ˉ V ˉ x − B V ˉ x B y = \frac{\bar{L}}{\bar{V}} x - \frac{B}{\bar{V}} x_B y = V ˉ L ˉ x − V ˉ B x B
Where:
B B B is the bottoms molar flow rate.
x B x_B x B is the bottoms mole fraction of the light key.
The SOL passes through the point ( x B , x B ) (x_B, x_B) ( x B , x B ) on the y = x y = x y = x diagonal and has a slope of L ˉ V ˉ \frac{\bar{L}}{\bar{V}} V ˉ L ˉ , which is always greater than 1.0.
Feed Line (q-line) and Thermal Conditions
The feed line (or q q q -line) represents the locus of the intersection points of the ROL and SOL. The parameter q q q is defined as the mole fraction of liquid in the feed, or the heat required to vaporize 1 mole of feed divided by the molar latent heat of vaporization: y = q q − 1 x − x F q − 1 y = \frac{q}{q-1} x - \frac{x_F}{q-1} y = q − 1 q x − q − 1 x F
The q q q -line intersects the y = x y = x y = x diagonal at the feed composition point ( x F , x F ) (x_F, x_F) ( x F , x F ) and has a slope of q q − 1 \frac{q}{q-1} q − 1 q . The thermal condition of the feed determines the slope:
Subcooled Liquid ( q > 1 q > 1 q > 1 ): Slope is positive ( > 1 > 1 > 1 ).
Saturated Liquid ( q = 1 q = 1 q = 1 ): Slope is infinite (vertical line).
Liquid-Vapor Mixture ( 0 < q < 1 0 < q < 1 0 < q < 1 ): Slope is negative.
Saturated Vapor ( q = 0 q = 0 q = 0 ): Slope is zero (horizontal line).
Superheated Vapor ( q < 0 q < 0 q < 0 ): Slope is positive ( < 1 < 1 < 1 ).
- Operating Limits: Reflux Ratio
- Minimum Reflux Ratio ( R min R_{\min} R m i n )
Decreasing the reflux ratio R R R decreases the slope of the ROL, moving it closer to the equilibrium curve. At R min R_{\min} R m i n , the intersection of the ROL, SOL, and q q q -line touches the equilibrium curve, creating a pinch point. At this point, the driving force is zero, and an infinite number of stages is required.
For a saturated liquid feed ( q = 1 q=1 q = 1 ), the pinch point occurs at x = x F x = x_F x = x F . The minimum reflux ratio can be calculated using the equilibrium vapor concentration in contact with the feed ( y F ∗ y_F^* y F ∗ ): R min = x D − y F ∗ y F ∗ − x F R_{\min} = \frac{x_D - y_F^*}{y_F^* - x_F} R m i n = y F ∗ − x F x D − y F ∗
Total Reflux ( R = ∞ R = \infty R = ∞ )
At total reflux, all overhead vapor is condensed and returned as reflux ( D = 0 D=0 D = 0 , L = V L=V L = V ). The ROL and SOL lie exactly on the y = x y = x y = x diagonal line. This represents the minimum number of theoretical stages ( N min N_{\min} N m i n ) required for the separation.
The Fenske equation analytically calculates N min N_{\min} N m i n for a system with constant relative volatility: N min = ln [ ( x D 1 − x D ) ( 1 − x B x B ) ] ln α − 1 N_{\min} = \frac{\ln\left[ \left(\frac{x_D}{1-x_D}\right) \left(\frac{1-x_B}{x_B}\right) \right]}{\ln \alpha} - 1 N m i n = ln α ln [ ( 1 − x D x D ) ( x B 1 − x B ) ] − 1
Where the − 1 -1 − 1 term accounts for the partial reboiler (which acts as one equilibrium stage). If a total reboiler is used, the minimum stages inside the column is N min + 1 N_{\min} + 1 N m i n + 1 , or simply N stages = N min + 1 N_{\text{stages}} = N_{\min} + 1 N stages = N m i n + 1 .
Stage and Column Efficiency
The theoretical stage calculation assumes that the vapor and liquid leaving each tray are in perfect thermodynamic equilibrium. In real columns, contact is incomplete, and trays are less than 100 % 100\% 100% efficient.
Murphree Vapor Efficiency ( E M V E_{MV} E M V )
The efficiency of a specific tray n n n is defined by: E M V = y n − y n + 1 y n ∗ − y n + 1 E_{MV} = \frac{y_n - y_{n+1}}{y_n^* - y_{n+1}} E M V = y n ∗ − y n + 1 y n − y n + 1
Where y n y_n y n is the actual vapor composition leaving stage n n n , y n + 1 y_{n+1} y n + 1 is the actual vapor composition entering stage n n n , and y n ∗ y_n^* y n ∗ is the vapor composition in equilibrium with the liquid composition ( x n x_n x n ) leaving stage n n n .
Overall Column Efficiency ( E O E_O E O )
The actual number of trays needed is related to the ideal (theoretical) stages by: E O = N ideal N actual E_O = \frac{N_{\text{ideal}}}{N_{\text{actual}}} E O = N actual N ideal
Where N ideal N_{\text{ideal}} N ideal is the number of equilibrium stages determined from the McCabe-Thiele diagram (excluding the reboiler if it is a partial reboiler).
Worked Example: Fenske and Minimum Reflux
Problem: A binary distillation column is separating benzene and toluene. The feed is a saturated liquid ( q = 1.0 q = 1.0 q = 1.0 ) with x F = 0.45 x_F = 0.45 x F = 0.45 . The distillate must contain 95 mol % 95\text{ mol}\% 95 mol % benzene ( x D = 0.95 x_D = 0.95 x D = 0.95 ) and the bottoms must contain 5 mol % 5\text{ mol}\% 5 mol % benzene ( x B = 0.05 x_B = 0.05 x B = 0.05 ). The average relative volatility is α = 2.4 \alpha = 2.4 α = 2.4 .
Calculate the minimum number of theoretical stages inside the column using the Fenske equation.
Determine the minimum reflux ratio ( R min R_{\min} R m i n ).
Solution:
Apply the Fenske equation: N min = ln [ ( 0.95 1 − 0.95 ) ( 1 − 0.05 0.05 ) ] ln 2.4 − 1 N_{\min} = \frac{\ln\left[ \left(\frac{0.95}{1 - 0.95}\right) \left(\frac{1 - 0.05}{0.05}\right) \right]}{\ln 2.4} - 1 N m i n = ln 2.4 ln [ ( 1 − 0.95 0.95 ) ( 0.05 1 − 0.05 ) ] − 1 N min = ln [ ( 19 ) ( 19 ) ] ln 2.4 − 1 = ln ( 361 ) 0.8755 − 1 = 5.8889 0.8755 − 1 = 6.73 − 1 = 5.73 stages N_{\min} = \frac{\ln\left[ (19) (19) \right]}{\ln 2.4} - 1 = \frac{\ln(361)}{0.8755} - 1 = \frac{5.8889}{0.8755} - 1 = 6.73 - 1 = 5.73\text{ stages} N m i n = ln 2.4 ln [ ( 19 ) ( 19 ) ] − 1 = 0.8755 ln ( 361 ) − 1 = 0.8755 5.8889 − 1 = 6.73 − 1 = 5.73 stages
Thus, the minimum number of theoretical stages inside the column is approximately 5.7 5.7 5.7 stages.
Since the feed is a saturated liquid ( q = 1.0 q = 1.0 q = 1.0 ), the pinch point occurs at x = x F = 0.45 x = x_F = 0.45 x = x F = 0.45 . Find the equilibrium vapor concentration ( y F ∗ y_F^* y F ∗ ): y F ∗ = α x F 1 + ( α − 1 ) x F = 2.4 × 0.45 1 + ( 2.4 − 1 ) × 0.45 = 1.08 1 + 1.4 × 0.45 = 1.08 1.63 = 0.6626 y_F^* = \frac{\alpha x_F}{1 + (\alpha - 1) x_F} = \frac{2.4 \times 0.45}{1 + (2.4 - 1) \times 0.45} = \frac{1.08}{1 + 1.4 \times 0.45} = \frac{1.08}{1.63} = 0.6626 y F ∗ = 1 + ( α − 1 ) x F α x F = 1 + ( 2.4 − 1 ) × 0.45 2.4 × 0.45 = 1 + 1.4 × 0.45 1.08 = 1.63 1.08 = 0.6626
Apply the minimum reflux ratio equation: R min = x D − y F ∗ y F ∗ − x F = 0.95 − 0.6626 0.6626 − 0.45 = 0.2874 0.2126 ≈ 1.35 R_{\min} = \frac{x_D - y_F^*}{y_F^* - x_F} = \frac{0.95 - 0.6626}{0.6626 - 0.45} = \frac{0.2874}{0.2126} \approx 1.35 R m i n = y F ∗ − x F x D − y F ∗ = 0.6626 − 0.45 0.95 − 0.6626 = 0.2126 0.2874 ≈ 1.35
The minimum reflux ratio is 1.35 1.35 1.35 .