Study guide

8.3 Steady-State Energy Balances

NCEES Fundamentals of Engineering FE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Mathematics

1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error

2 Chapter 2: Probability and Statistics

2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control

3 Chapter 3: Engineering Sciences

3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws

4 Chapter 4: Materials Science

4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites

5 Chapter 5: Chemistry and Biology

5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics

6 Chapter 6: Fluid Mechanics and Dynamics

6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows

7 Chapter 7: Thermodynamics

7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing

8 Chapter 8: Material and Energy Balances

8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances

9 Chapter 9: Heat Transfer

9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design

10 Chapter 10: Mass Transfer and Separation

10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations

11 Chapter 11: Solids Handling

11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage

12 Chapter 12: Chemical Reaction Engineering

12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics

13 Chapter 13: Economics

13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even

14 Chapter 14: Process Design

14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design

15 Chapter 15: Process Control

15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware

16 Chapter 16: Safety, Health, and Environment

16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations

17 Chapter 17: Ethics and Professional Practice

17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability

8.3 Steady-State Energy Balances

Key Takeaways Explain This Topic AI

The First Law of Thermodynamics for open systems under steady state simplifies to Q_dot - W_dot_s = Delta(H_dot) when kinetic and potential energy changes are negligible.

Enthalpy changes in non-reactive systems are calculated as Delta H = m * integral(Cp dT) for sensible heat, plus m * Delta H_v or m * Delta H_m for phase transitions.

Heats of reaction at standard reference conditions (298 K, 1 bar) are calculated from standard heats of formation: Delta H_rxn = sum(nu_i * Delta H_f,i).

To find the heat of reaction at temperatures other than standard reference conditions, Kirchhoff's Law is applied: Delta H_rxn(T) = Delta H_rxn(T_ref) + integral(Delta Cp dT).

Combustion calculations require determining the stoichiometric oxygen requirement, percent excess air, and accounting for the standard 79% N2 and 21% O2 composition of air on both a wet and dry basis.

Last updated: July 2026

Thermodynamic Principles and the First Law

Material balances track mass flows, whereas energy balances track the heat, work, and internal energy flows within a system. The thermodynamic foundation of energy balances is the First Law of Thermodynamics, which expresses the conservation of energy. For a closed system (no mass flow crossing the system boundary), the First Law is written as: Δ U + Δ KE + Δ PE = Q − W \Delta U + \Delta \text{KE} + \Delta \text{PE} = Q - W Δ U + Δ KE + Δ PE = Q − W

where Δ U \Delta U Δ U is the change in internal energy, Δ KE \Delta \text{KE} Δ KE is the change in kinetic energy, Δ PE \Delta \text{PE} Δ PE is the change in potential energy, Q Q Q is the heat added to the system, and W W W is the work done by the system. For most chemical process units, changes in kinetic and potential energy are negligible, simplifying the closed system balance to Δ U = Q − W \Delta U = Q - W Δ U = Q − W .

For an open system (control volume) operating at steady state, mass enters and leaves the system continuously. In this case, we must account for the work required to push fluid into and out of the system (flow work). Enthalpy ( H = U + P V H = U + PV H = U + P V ) is defined to combine internal energy and flow work. The steady-state open-system energy balance is: Δ H ˙ + Δ KE ˙ + Δ PE ˙ = Q ˙ − W ˙ s \Delta \dot{H} + \Delta \dot{\text{KE}} + \Delta \dot{\text{PE}} = \dot{Q} - \dot{W}_s Δ H ˙ + Δ KE ˙ + Δ PE ˙ = Q ˙ ​ − W ˙ s ​

where Q ˙ \dot{Q} Q ˙ ​ is the rate of heat input, W ˙ s \dot{W}_s W ˙ s ​ is the shaft work rate (work associated with pumps, turbines, or compressors), and Δ H ˙ \Delta \dot{H} Δ H ˙ is the net rate of enthalpy flow leaving the system minus that entering. Neglecting kinetic and potential energy changes, the balance simplifies to the standard form found in the FE Reference Handbook: Q ˙ − W ˙ s = ∑ m ˙ o u t H ^ o u t − ∑ m ˙ i n H ^ i n \dot{Q} - \dot{W}_s = \sum \dot{m}_{out} \hat{H}_{out} - \sum \dot{m}_{in} \hat{H}_{in} Q ˙ ​ − W ˙ s ​ = ∑ m ˙ o u t ​ H ^ o u t ​ − ∑ m ˙ in ​ H ^ in ​

where H ^ \hat{H} H ^ is the specific enthalpy (energy per unit mass). To evaluate these enthalpies, you must establish a reference state (e.g., liquid water at 0.01 ∘ C 0.01^\circ C 0.0 1 ∘ C and 1 bar 1 \text{ bar} 1 bar ) where specific enthalpy is defined as zero.

Enthalpy Changes in Non-Reactive Systems

For systems without chemical reactions, enthalpy changes occur due to temperature changes (sensible heat) or phase changes (latent heat). The change in specific enthalpy for a substance heated from T 1 T_1 T 1 ​ to T 2 T_2 T 2 ​ without phase change is calculated using its constant-pressure heat capacity ( C p C_p C p ​ ): Δ H ^ = ∫ T 1 T 2 C p ( T ) d T \Delta \hat{H} = \int_{T_1}^{T_2} C_p(T) dT Δ H ^ = ∫ T 1 ​ T 2 ​ ​ C p ​ ( T ) d T

If the heat capacity is constant or an average value C ˉ p \bar{C}_p C ˉ p ​ is used, this simplifies to Δ H ^ = C ˉ p ( T 2 − T 1 ) \Delta \hat{H} = \bar{C}_p(T_2 - T_1) Δ H ^ = C ˉ p ​ ( T 2 ​ − T 1 ​ ) . When a phase change occurs (such as vaporization or melting), you must add the latent heat of vaporization ( Δ H v \Delta H_v Δ H v ​ ) or latent heat of fusion ( Δ H m \Delta H_m Δ H m ​ ) at the transition temperature: Δ H ^ = ∫ T 1 T t r a n s i t i o n C p , p h a s e 1 d T + Δ H p h a s e _ c h a n g e + ∫ T t r a n s i t i o n T 2 C p , p h a s e 2 d T \Delta \hat{H} = \int_{T_1}^{T_{transition}} C_{p,phase1} dT + \Delta H_{phase\_change} + \int_{T_{transition}}^{T_2} C_{p,phase2} dT Δ H ^ = ∫ T 1 ​ T t r an s i t i o n ​ ​ C p , p ha se 1 ​ d T + Δ H p ha se _ c han g e ​ + ∫ T t r an s i t i o n ​ T 2 ​ ​ C p , p ha se 2 ​ d T

Thermochemistry and Heats of Reaction

When chemical reactions occur, chemical bonds are broken and formed, releasing or absorbing energy. The heat of reaction ( Δ H r x n \Delta H_{rxn} Δ H r x n ​ ) is the enthalpy change when stoichiometric quantities of reactants react completely at a specified temperature and pressure. The standard heat of reaction at reference conditions ( T r e f = 298.15 K T_{ref} = 298.15 \text{ K} T re f ​ = 298.15 K , P = 1 bar P = 1 \text{ bar} P = 1 bar ) is calculated using standard heats of formation ( Δ H f , i ∘ \Delta H_{f,i}^\circ Δ H f , i ∘ ​ ): Δ H r x n ∘ = ∑ ν i Δ H f , i ∘ = ∑ ν j Δ H f , j ∘ (products) − ∑ ν k Δ H f , k ∘ (reactants) \Delta H_{rxn}^\circ = \sum \nu_i \Delta H_{f,i}^\circ = \sum \nu_j \Delta H_{f,j}^\circ \text{ (products)} - \sum \nu_k \Delta H_{f,k}^\circ \text{ (reactants)} Δ H r x n ∘ ​ = ∑ ν i ​ Δ H f , i ∘ ​ = ∑ ν j ​ Δ H f , j ∘ ​ (products) − ∑ ν k ​ Δ H f , k ∘ ​ (reactants)

where ν i \nu_i ν i ​ is the stoichiometric coefficient of species i i i (positive for products, negative for reactants). Standard heats of formation for common substances are tabulated in the chemistry and thermodynamics sections of the FE Reference Handbook. Note that the standard heat of formation of any elemental substance in its most stable physical state (e.g., O 2 ( g ) O_2(g) O 2 ​ ( g ) , N 2 ( g ) N_2(g) N 2 ​ ( g ) , C ( s ) C(s) C ( s ) ) is zero.

To find the heat of reaction at a temperature T T T other than the reference temperature, Kirchhoff's Law is applied: Δ H r x n ( T ) = Δ H r x n ∘ ( T r e f ) + ∫ T r e f T Δ C p d T \Delta H_{rxn}(T) = \Delta H_{rxn}^\circ(T_{ref}) + \int_{T_{ref}}^T \Delta C_p dT Δ H r x n ​ ( T ) = Δ H r x n ∘ ​ ( T re f ​ ) + ∫ T re f ​ T ​ Δ C p ​ d T

where Δ C p = ∑ ν i C p , i \Delta C_p = \sum \nu_i C_{p,i} Δ C p ​ = ∑ ν i ​ C p , i ​ . For a reactive system, the energy balance is evaluated by calculating the heat of reaction at a reference temperature and adding the sensible heat changes of the reactants and products relative to that reference temperature.

Combustion Calculations

Combustion is the rapid reaction of a fuel with oxygen to produce carbon dioxide, water, and heat. Combustion calculations are a major focus of the FE Chemical exam and require key definitions:

Theoretical Oxygen (Stoichiometric O 2 O_2 O 2 ​ ): The exact amount of oxygen required for complete combustion of all carbon to C O 2 CO_2 C O 2 ​ , hydrogen to H 2 O H_2 O H 2 ​ O , and sulfur to S O 2 SO_2 S O 2 ​ .

Excess Air: The amount of air fed to the burner in excess of the theoretical requirement. It is calculated as: % Excess Air = ( O 2 ) f e d − ( O 2 ) s t o i c h ( O 2 ) s t o i c h × 100 % \% \text{ Excess Air} = \frac{(O_2)_{fed} - (O_2)_{stoich}}{(O_2)_{stoich}} \times 100\% % Excess Air = ( O 2 ​ ) s t o i c h ​ ( O 2 ​ ) f e d ​ − ( O 2 ​ ) s t o i c h ​ ​ × 100%

Since air is modeled as 21 mol% O 2 21 \text{ mol\% } O_2 21 mol% O 2 ​ and 79 mol% N 2 79 \text{ mol\% } N_2 79 mol% N 2 ​ , the moles of nitrogen entering with air is N 2 = O 2 × ( 79 / 21 ) = 3.76 × O 2 N_2 = O_2 \times (79/21) = 3.76 \times O_2 N 2 ​ = O 2 ​ × ( 79/21 ) = 3.76 × O 2 ​ .

Wet-Basis vs. Dry-Basis: Dry-basis composition lists the mole fractions of the flue gas components excluding water vapor. Wet-basis composition includes all components, including water vapor. Be sure to convert between wet and dry bases as specified in the exam problem.

Worked Example: Combustion Energy Balance

Propane gas ( C 3 H 8 C_3 H_8 C 3 ​ H 8 ​ ) is burned completely with 20.0 % 20.0\% 20.0% excess air. Both the propane and the air enter the burner at 25 ∘ C 25^\circ C 2 5 ∘ C ( 298 K 298 \text{ K} 298 K ). The combustion products leave the chamber at 500 ∘ C 500^\circ C 50 0 ∘ C ( 773 K 773 \text{ K} 773 K ). Calculate the heat removed from the burner ( Q ˙ \dot{Q} Q ˙ ​ , in kJ \text{kJ} kJ ) per mole of propane burned. The standard heat of combustion of propane at 25 ∘ C 25^\circ C 2 5 ∘ C (with water as a gas) is Δ H c ∘ = − 2 , 044 kJ/mol \Delta H_c^\circ = -2,044 \text{ kJ/mol} Δ H c ∘ ​ = − 2 , 044 kJ/mol . The average heat capacities ( C p C_p C p ​ ) between 25 ∘ C 25^\circ C 2 5 ∘ C and 500 ∘ C 500^\circ C 50 0 ∘ C are: C p , C O 2 = 0.045 kJ/(mol ⋅ ∘ C ) C_{p, CO2} = 0.045 \text{ kJ/(mol}\cdot^\circ C) C p , CO 2 ​ = 0.045 kJ/(mol ⋅ ∘ C ) , C p , H 2 O = 0.036 kJ/(mol ⋅ ∘ C ) C_{p, H2O} = 0.036 \text{ kJ/(mol}\cdot^\circ C) C p , H 2 O ​ = 0.036 kJ/(mol ⋅ ∘ C ) , C p , O 2 = 0.032 kJ/(mol ⋅ ∘ C ) C_{p, O2} = 0.032 \text{ kJ/(mol}\cdot^\circ C) C p , O 2 ​ = 0.032 kJ/(mol ⋅ ∘ C ) , and C p , N 2 = 0.030 kJ/(mol ⋅ ∘ C ) C_{p, N2} = 0.030 \text{ kJ/(mol}\cdot^\circ C) C p , N 2 ​ = 0.030 kJ/(mol ⋅ ∘ C ) .

Solution:

First, write the balanced stoichiometric equation for propane combustion: C 3 H 8 ( g ) + 5 O 2 ( g ) → 3 C O 2 ( g ) + 4 H 2 O ( g ) C_3 H_8 (g) + 5 O_2 (g) \to 3 CO_2 (g) + 4 H_2 O (g) C 3 ​ H 8 ​ ( g ) + 5 O 2 ​ ( g ) → 3 C O 2 ​ ( g ) + 4 H 2 ​ O ( g )

Based on 1.0 mole 1.0 \text{ mole} 1.0 mole of propane burned:

Stoichiometric O 2 O_2 O 2 ​ required = 5.0 mol 5.0 \text{ mol} 5.0 mol

Actual O 2 O_2 O 2 ​ fed = 5.0 × 1.20 = 6.0 mol 5.0 \times 1.20 = 6.0 \text{ mol} 5.0 × 1.20 = 6.0 mol (representing 20 % 20\% 20% excess)

Actual N 2 N_2 N 2 ​ fed = 6.0 × ( 79 / 21 ) = 22.57 mol 6.0 \times (79/21) = 22.57 \text{ mol} 6.0 × ( 79/21 ) = 22.57 mol

The product stream composition is:

  • C O 2 = 3.0 mol CO_2 = 3.0 \text{ mol} C O 2 ​ = 3.0 mol
  • H 2 O = 4.0 mol H_2 O = 4.0 \text{ mol} H 2 ​ O = 4.0 mol

O 2 remaining = 6.0 − 5.0 = 1.0 mol O_2 \text{ remaining} = 6.0 - 5.0 = 1.0 \text{ mol} O 2 ​ remaining = 6.0 − 5.0 = 1.0 mol

N 2 remaining = 22.57 mol N_2 \text{ remaining} = 22.57 \text{ mol} N 2 ​ remaining = 22.57 mol

Since the reactants enter at the reference temperature ( 25 ∘ C 25^\circ C 2 5 ∘ C ), their inlet enthalpy is zero. The heat removed Q ˙ \dot{Q} Q ˙ ​ is the sum of the heat of reaction at 25 ∘ C 25^\circ C 2 5 ∘ C and the sensible heat change of the products as they are heated from 25 ∘ C 25^\circ C 2 5 ∘ C to 500 ∘ C 500^\circ C 50 0 ∘ C ( Δ T = 475 ∘ C \Delta T = 475^\circ C Δ T = 47 5 ∘ C ): Q ˙ = Δ H c ∘ + ∑ n i C p , i Δ T \dot{Q} = \Delta H_c^\circ + \sum n_i C_{p,i} \Delta T Q ˙ ​ = Δ H c ∘ ​ + ∑ n i ​ C p , i ​ Δ T

Calculate the sum of n i C p , i n_i C_{p,i} n i ​ C p , i ​ for the products: ∑ n i C p , i = ( 3.0 ) ( 0.045 ) + ( 4.0 ) ( 0.036 ) + ( 1.0 ) ( 0.032 ) + ( 22.57 ) ( 0.030 ) \sum n_i C_{p,i} = (3.0)(0.045) + (4.0)(0.036) + (1.0)(0.032) + (22.57)(0.030) ∑ n i ​ C p , i ​ = ( 3.0 ) ( 0.045 ) + ( 4.0 ) ( 0.036 ) + ( 1.0 ) ( 0.032 ) + ( 22.57 ) ( 0.030 ) ∑ n i C p , i = 0.135 + 0.144 + 0.032 + 0.6771 = 0.9881 kJ/ ∘ C \sum n_i C_{p,i} = 0.135 + 0.144 + 0.032 + 0.6771 = 0.9881 \text{ kJ/}^\circ C ∑ n i ​ C p , i ​ = 0.135 + 0.144 + 0.032 + 0.6771 = 0.9881 kJ/ ∘ C

Now, calculate the sensible heat change: Δ H s e n s i b l e = ( 0.9881 kJ/ ∘ C ) ( 475 ∘ C ) = 469.35 kJ \Delta H_{sensible} = (0.9881 \text{ kJ/}^\circ C)(475^\circ C) = 469.35 \text{ kJ} Δ H se n s ib l e ​ = ( 0.9881 kJ/ ∘ C ) ( 47 5 ∘ C ) = 469.35 kJ

Finally, calculate the heat removed: Q ˙ = − 2 , 044 kJ + 469.35 kJ = − 1 , 574.65 kJ \dot{Q} = -2,044 \text{ kJ} + 469.35 \text{ kJ} = -1,574.65 \text{ kJ} Q ˙ ​ = − 2 , 044 kJ + 469.35 kJ = − 1 , 574.65 kJ

Thus, approximately 1 , 575 kJ 1,575 \text{ kJ} 1 , 575 kJ of heat is released (removed) per mole of propane burned.