Study guide
8.4 Unsteady-State Energy Balances
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
8.4 Unsteady-State Energy Balances
Key Takeaways Explain This Topic AI
Dynamic energy balances must account for the accumulation of internal energy (dU/dt) for closed systems or enthalpy (dH/dt) for open systems.
For a well-mixed liquid batch vessel, the dynamic heat-up or cool-down is modeled by the first-order differential equation m * Cp * dT/dt = UA * (T_j - T), assuming negligible shaft work.
The thermal time constant tau = (m * Cp) / (U * A) represents the characteristic response time of the system, with the temperature reaching 63.2% of its ultimate change in one time constant.
For jacketed reactors, the heat of reaction must be coupled into the energy balance, which can lead to thermal runaway if heat generation exceeds the heat removal capacity.
Continuous unsteady systems (such as a CSTR during startup) must include both flow enthalpy terms and heat exchange terms: V * rho * Cp * dT/dt = F * rho * Cp * (T_in - T) + U * A * (T_j - T).
Last updated: July 2026
Dynamic Energy Balances
Unsteady-state or transient energy balances describe processes where temperature, pressure, or internal energy change with time. These models are crucial for analyzing the heat-up or cool-down of vessels, the startup and shutdown of heat exchangers, and the dynamic behavior of chemical reactors. The general transient energy balance is formulated from the First Law of Thermodynamics. For an open system, it is written as: d U s y s d t = ∑ m ˙ i n H ^ i n − ∑ m ˙ o u t H ^ o u t + Q ˙ − W ˙ s \frac{dU_{sys}}{dt} = \sum \dot{m}_{in} \hat{H}_{in} - \sum \dot{m}_{out} \hat{H}_{out} + \dot{Q} - \dot{W}_s d t d U sys = ∑ m ˙ in H ^ in − ∑ m ˙ o u t H ^ o u t + Q ˙ − W ˙ s
For liquid-phase systems, we assume that the difference between internal energy and enthalpy is negligible ( U ≈ H U \approx H U ≈ H ) and that the liquid is incompressible with a constant heat capacity C p C_p C p . The accumulation term becomes d U s y s d t ≈ d H s y s d t = d ( m s y s H ^ s y s ) d t \frac{dU_{sys}}{dt} \approx \frac{dH_{sys}}{dt} = \frac{d(m_{sys} \hat{H}_{sys})}{dt} d t d U sys ≈ d t d H sys = d t d ( m sys H ^ sys ) . Utilizing the definition of specific enthalpy relative to a reference temperature, we can write the accumulation in terms of temperature: d ( m s y s C p T ) d t = m s y s C p d T d t + C p T d m s y s d t \frac{d(m_{sys} C_p T)}{dt} = m_{sys} C_p \frac{dT}{dt} + C_p T \frac{dm_{sys}}{dt} d t d ( m sys C p T ) = m sys C p d t d T + C p T d t d m sys
For closed systems or systems with constant mass ( m s y s = m m_{sys} = m m sys = m ), the mass derivative is zero, and the transient energy balance simplifies to: m C p d T d t = Q ˙ − W ˙ s m C_p \frac{dT}{dt} = \dot{Q} - \dot{W}_s m C p d t d T = Q ˙ − W ˙ s
Unsteady Heat-Up or Cool-Down of Batch Vessels
Consider a closed, well-mixed batch vessel containing a mass m m m of liquid with heat capacity C p C_p C p . The liquid is heated by a utility fluid (such as steam) circulating through a heating jacket or internal coil. The utility fluid is assumed to remain at a constant temperature T j T_j T j (e.g., condensing steam). The rate of heat transfer Q ˙ \dot{Q} Q ˙ from the jacket to the vessel liquid is given by: Q ˙ = U A ( T j − T ) \dot{Q} = U A (T_j - T) Q ˙ = U A ( T j − T )
where U U U is the overall heat transfer coefficient, A A A is the heat transfer area, and T ( t ) T(t) T ( t ) is the liquid temperature in the vessel. Substituting this rate into the closed-system energy balance (with W ˙ s = 0 \dot{W}_s = 0 W ˙ s = 0 ) yields: m C p d T d t = U A ( T j − T ) m C_p \frac{dT}{dt} = U A (T_j - T) m C p d t d T = U A ( T j − T )
To solve this differential equation, separate the variables T T T and t t t : d T T j − T = U A m C p d t \frac{dT}{T_j - T} = \frac{U A}{m C_p} dt T j − T d T = m C p U A d t
Integrating from the initial liquid temperature T ( 0 ) = T 0 T(0) = T_0 T ( 0 ) = T 0 to the temperature T ( t ) T(t) T ( t ) at time t t t gives: − ln ( T j − T ( t ) T j − T 0 ) = U A m C p t ⟹ T j − T ( t ) T j − T 0 = e − U A m C p t -\ln\left(\frac{T_j - T(t)}{T_j - T_0}\right) = \frac{U A}{m C_p} t \implies \frac{T_j - T(t)}{T_j - T_0} = e^{-\frac{U A}{m C_p} t} − ln ( T j − T 0 T j − T ( t ) ) = m C p U A t ⟹ T j − T 0 T j − T ( t ) = e − m C p U A t
Rearranging this expression gives the liquid temperature as a function of time: T ( t ) = T j + ( T 0 − T j ) e − t / τ T(t) = T_j + (T_0 - T_j) e^{-t/\tau} T ( t ) = T j + ( T 0 − T j ) e − t / τ
where τ = m C p U A \tau = \frac{m C_p}{U A} τ = U A m C p is defined as the thermal time constant of the system. The thermal time constant represents the time required for the temperature to change by 63.2 % 63.2\% 63.2% of the difference between its initial value and the jacket temperature. A smaller time constant (resulting from a larger heat transfer coefficient, larger area, or smaller mass) leads to a faster thermal response.
Unsteady Energy Balances in Jacketed Reacting Systems
In a jacketed reactor, the energy balance must account for the heat of reaction ( Δ H r x n \Delta H_{rxn} Δ H r x n ). The reaction rate r r r ( mol / ( L ⋅ s ) \text{mol}/(\text{L} \cdot \text{s}) mol / ( L ⋅ s ) ) inside a reactor of volume V V V generates or consumes heat. The rate of heat generation is: Q ˙ g e n = ( − Δ H r x n ) r V \dot{Q}_{gen} = (-\Delta H_{rxn}) r V Q ˙ g e n = ( − Δ H r x n ) r V
Note that for an exothermic reaction, Δ H r x n \Delta H_{rxn} Δ H r x n is negative, so − Δ H r x n -\Delta H_{rxn} − Δ H r x n is positive, meaning heat is generated. For an endothermic reaction, heat is consumed. Incorporating heat generation and heat removal via a jacket into a batch reactor energy balance yields: m C p d T d t = U A ( T j − T ) + ( − Δ H r x n ) r V m C_p \frac{dT}{dt} = U A (T_j - T) + (-\Delta H_{rxn}) r V m C p d t d T = U A ( T j − T ) + ( − Δ H r x n ) r V
This equation is coupled to the material balance because the reaction rate r r r depends on the reactant concentrations, which decrease over time. Solving these coupled equations typically requires numerical methods. However, the FE Chemical exam often tests qualitative understandings of thermal runaway. Thermal runaway occurs in exothermic reactors when the rate of heat generation increases exponentially with temperature (following the Arrhenius rate law, k = A e − E a / R T k = A e^{-E_a/RT} k = A e − E a / RT ), while the rate of heat removal via the jacket increases only linearly with temperature ( U A ( T − T j ) UA(T - T_j) U A ( T − T j ) ). If heat generation exceeds the maximum possible heat removal, the reactor temperature escalates rapidly, leading to dangerous overpressurization or equipment failure.
Continuous Transient Systems (CSTR Startup)
For a continuous stirred-tank reactor (CSTR) or a continuous heating tank during startup, fluid enters and leaves the vessel continuously. The transient energy balance must include flow enthalpy streams: V ρ C p d T d t = F ρ C p ( T i n − T ) + U A ( T j − T ) V \rho C_p \frac{dT}{dt} = F \rho C_p (T_{in} - T) + U A (T_j - T) V ρ C p d t d T = Fρ C p ( T in − T ) + U A ( T j − T )
where V V V is the tank volume, F F F is the volumetric flow rate, and T i n T_{in} T in is the inlet stream temperature. Dividing by V ρ C p V \rho C_p V ρ C p and rearranging yields: d T d t + ( F V + U A V ρ C p ) T = F V T i n + U A V ρ C p T j \frac{dT}{dt} + \left(\frac{F}{V} + \frac{U A}{V \rho C_p}\right) T = \frac{F}{V} T_{in} + \frac{U A}{V \rho C_p} T_j d t d T + ( V F + V ρ C p U A ) T = V F T in + V ρ C p U A T j
This is a first-order linear ODE with an effective time constant τ e f f = ( 1 τ f l o w + 1 τ t h e r m a l ) − 1 \tau_{eff} = \left(\frac{1}{\tau_{flow}} + \frac{1}{\tau_{thermal}}\right)^{-1} τ e ff = ( τ f l o w 1 + τ t h er ma l 1 ) − 1 where τ f l o w = V / F \tau_{flow} = V/F τ f l o w = V / F and τ t h e r m a l = V ρ C p U A \tau_{thermal} = \frac{V \rho C_p}{U A} τ t h er ma l = U A V ρ C p .
Worked Example: Steam-Jacketed Batch Heating
A well-insulated batch heating vessel contains 500 kg 500 \text{ kg} 500 kg of a liquid reactant (heat capacity C p = 3.50 kJ/(kg ⋅ ∘ C ) C_p = 3.50 \text{ kJ/(kg}\cdot^\circ C) C p = 3.50 kJ/(kg ⋅ ∘ C ) ) initially at 20 ∘ C 20^\circ C 2 0 ∘ C . The vessel is heated by steam condensing in a jacket at 120 ∘ C 120^\circ C 12 0 ∘ C . The heat transfer area is 2.50 m 2 2.50 \text{ m}^2 2.50 m 2 , and the overall heat transfer coefficient is 400 W/(m 2 ⋅ ∘ C ) 400 \text{ W/(m}^2\cdot^\circ C) 400 W/(m 2 ⋅ ∘ C ) ( 0.400 kW/(m 2 ⋅ ∘ C ) 0.400 \text{ kW/(m}^2\cdot^\circ C) 0.400 kW/(m 2 ⋅ ∘ C ) ). Calculate the time (in minutes) required to heat the liquid from 20 ∘ C 20^\circ C 2 0 ∘ C to 80 ∘ C 80^\circ C 8 0 ∘ C .
Solution:
Identify the process parameters:
- m = 500 kg m = 500 \text{ kg} m = 500 kg
- C p = 3.50 kJ/(kg ⋅ ∘ C ) C_p = 3.50 \text{ kJ/(kg}\cdot^\circ C) C p = 3.50 kJ/(kg ⋅ ∘ C )
- T 0 = 20 ∘ C T_0 = 20^\circ C T 0 = 2 0 ∘ C
- T ( t ) = 80 ∘ C T(t) = 80^\circ C T ( t ) = 8 0 ∘ C
- T j = 120 ∘ C T_j = 120^\circ C T j = 12 0 ∘ C
- U = 0.400 kW/(m 2 ⋅ ∘ C ) U = 0.400 \text{ kW/(m}^2\cdot^\circ C) U = 0.400 kW/(m 2 ⋅ ∘ C )
- A = 2.50 m 2 A = 2.50 \text{ m}^2 A = 2.50 m 2
Calculate the product of U U U and A A A : U A = 0.400 kW/(m 2 ⋅ ∘ C ) × 2.50 m 2 = 1.00 kW/ ∘ C = 1.00 kJ/(s ⋅ ∘ C ) U A = 0.400 \text{ kW/(m}^2\cdot^\circ C) \times 2.50 \text{ m}^2 = 1.00 \text{ kW/}^\circ C = 1.00 \text{ kJ/(s}\cdot^\circ C) U A = 0.400 kW/(m 2 ⋅ ∘ C ) × 2.50 m 2 = 1.00 kW/ ∘ C = 1.00 kJ/(s ⋅ ∘ C )
Calculate the thermal capacity of the liquid batch: m C p = 500 kg × 3.50 kJ/(kg ⋅ ∘ C ) = 1 , 750 kJ/ ∘ C m C_p = 500 \text{ kg} \times 3.50 \text{ kJ/(kg}\cdot^\circ C) = 1,750 \text{ kJ/}^\circ C m C p = 500 kg × 3.50 kJ/(kg ⋅ ∘ C ) = 1 , 750 kJ/ ∘ C
Calculate the thermal time constant τ \tau τ : τ = m C p U A = 1 , 750 kJ/ ∘ C 1.00 kJ/(s ⋅ ∘ C ) = 1 , 750 seconds \tau = \frac{m C_p}{U A} = \frac{1,750 \text{ kJ/}^\circ C}{1.00 \text{ kJ/(s}\cdot^\circ C)} = 1,750 \text{ seconds} τ = U A m C p = 1.00 kJ/(s ⋅ ∘ C ) 1 , 750 kJ/ ∘ C = 1 , 750 seconds
Next, use the analytical solution for temperature over time: T j − T ( t ) T j − T 0 = e − t / τ \frac{T_j - T(t)}{T_j - T_0} = e^{-t/\tau} T j − T 0 T j − T ( t ) = e − t / τ 120 − 80 120 − 20 = e − t / 1750 ⟹ 40 100 = 0.40 = e − t / 1750 \frac{120 - 80}{120 - 20} = e^{-t/1750} \implies \frac{40}{100} = 0.40 = e^{-t/1750} 120 − 20 120 − 80 = e − t /1750 ⟹ 100 40 = 0.40 = e − t /1750
Take the natural logarithm of both sides: ln ( 0.40 ) = − t 1 , 750 ⟹ − 0.9163 = − t 1 , 750 \ln(0.40) = -\frac{t}{1,750} \implies -0.9163 = -\frac{t}{1,750} ln ( 0.40 ) = − 1 , 750 t ⟹ − 0.9163 = − 1 , 750 t
Solve for time t t t in seconds: t = 0.9163 × 1 , 750 = 1 , 603.5 seconds t = 0.9163 \times 1,750 = 1,603.5 \text{ seconds} t = 0.9163 × 1 , 750 = 1 , 603.5 seconds
Convert the time to minutes: t = 1 , 603.5 seconds 60 seconds/minute = 26.7 minutes t = \frac{1,603.5 \text{ seconds}}{60 \text{ seconds/minute}} = 26.7 \text{ minutes} t = 60 seconds/minute 1 , 603.5 seconds = 26.7 minutes
Thus, it takes 26.7 26.7 26.7 minutes to heat the liquid from 20 ∘ C 20^\circ C 2 0 ∘ C to 80 ∘ C 80^\circ C 8 0 ∘ C .