Study guide

4.1 Material Properties and Compatibilities

NCEES Fundamentals of Engineering FE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Mathematics

1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error

2 Chapter 2: Probability and Statistics

2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control

3 Chapter 3: Engineering Sciences

3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws

4 Chapter 4: Materials Science

4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites

5 Chapter 5: Chemistry and Biology

5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics

6 Chapter 6: Fluid Mechanics and Dynamics

6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows

7 Chapter 7: Thermodynamics

7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing

8 Chapter 8: Material and Energy Balances

8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances

9 Chapter 9: Heat Transfer

9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design

10 Chapter 10: Mass Transfer and Separation

10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations

11 Chapter 11: Solids Handling

11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage

12 Chapter 12: Chemical Reaction Engineering

12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics

13 Chapter 13: Economics

13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even

14 Chapter 14: Process Design

14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design

15 Chapter 15: Process Control

15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware

16 Chapter 16: Safety, Health, and Environment

16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations

17 Chapter 17: Ethics and Professional Practice

17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability

4.1 Material Properties and Compatibilities

Key Takeaways Explain This Topic AI

Engineering stress and strain are defined relative to initial dimensions, while true stress and strain are defined relative to instantaneous dimensions.

Hooke's Law relates stress and strain linearly in the elastic region using Young's Modulus (E) and Shear Modulus (G), linked by Poisson's ratio.

Constraint of thermal expansion or contraction creates significant thermal stress: stress = -E * alpha * delta_T.

Austenitic stainless steels (300 series) have FCC structure, excellent low-temperature ductility, but are prone to sensitization between 500 and 800 degrees C.

Materials with BCC structures, like carbon steels, exhibit a ductile-to-brittle transition temperature (DBTT), while FCC materials remain ductile at cryogenic temperatures.

Last updated: July 2026

  • 4.1 Material Properties and Compatibilities
  • Material Properties in Chemical Process Design

In chemical engineering design, selecting materials of construction (MOC) is a critical decision that influences safety, reliability, and economic viability. Process equipment such as reactors, distillation columns, piping, and heat exchangers are subjected to a combination of mechanical loads, elevated temperatures, high pressures, and corrosive chemical environments. Mechanical or physical failure can lead to catastrophic loss of containment, environmental releases, fires, or explosions. Engineers utilize the NCEES FE Reference Handbook specifications to determine mechanical behavior, calculate stress and strain distributions, assess temperature constraints, and evaluate galvanic and chemical compatibilities of ferrous and nonferrous materials.

Physical and Chemical Properties

Physical properties are intrinsic characteristics of a material that can be measured without altering its chemical identity. Key physical properties in chemical process design include:

Density ( ρ \rho ρ ): Mass per unit volume, which determines equipment weight and structural support requirements.

Thermal Conductivity ( k k k ): The rate at which heat passes through a material. High conductivity is necessary for heat exchanger tubes, while low conductivity is desired for insulation.

Melting Point ( T m T_m T m ​ ): Defines the thermodynamic limit of a material's solid phase.

Coefficient of Thermal Expansion ( α \alpha α ): Quantifies dimensional changes with temperature.

Chemical properties govern how a material reacts with its environment. In chemical plants, chemical compatibility prevents degradation due to contact with acids, bases, organic solvents, and oxidizing agents. Material selection must ensure that the equipment does not react with, contaminate, or catalyze unwanted side reactions in the process stream.

Electrical Properties

Electrical conductivity ( σ e \sigma_e σ e ​ ) and resistivity ( ρ e \rho_e ρ e ​ ) dictate a material’s capacity to conduct electrical charge. Under the NCEES framework, resistivity is defined as the reciprocal of conductivity: ρ e = 1 σ e \rho_e = \frac{1}{\sigma_e} ρ e ​ = σ e ​ 1 ​

For a conductor of uniform cross-sectional area A A A and length L L L , the electrical resistance R R R is calculated as: R = ρ e L A R = \rho_e \frac{L}{A} R = ρ e ​ A L ​

In metals, electrical resistivity increases with temperature because thermal vibrations of the lattice scatter conducting electrons. This temperature dependence is modeled by the linear relation: ρ ( T ) = ρ 0 [ 1 + α T ( T − T 0 ) ] \rho(T) = \rho_0 [1 + \alpha_T (T - T_0)] ρ ( T ) = ρ 0 ​ [ 1 + α T ​ ( T − T 0 ​ )]

where ρ 0 \rho_0 ρ 0 ​ is the resistivity at reference temperature T 0 T_0 T 0 ​ , and α T \alpha_T α T ​ is the temperature coefficient of resistivity.

Important

In chemical processing plants handling flammable hydrocarbons or dusts, grounding and bonding of metallic vessels and piping are essential. Using highly conductive metals allows static charge—generated by fluid friction—to dissipate safely to the ground, preventing electrostatic discharges that could ignite explosive atmospheres.

Mechanical Properties and Stress-Strain Behavior

Mechanical properties describe how a material deforms under applied loads. The stress-strain relationship is key to determining structural limits.

Engineering Stress ( σ \sigma σ ): The applied tensile or compressive load P P P divided by the original cross-sectional area A 0 A_0 A 0 ​ : σ = P A 0 \sigma = \frac{P}{A_0} σ = A 0 ​ P ​

Engineering Strain ( ϵ \epsilon ϵ ): The ratio of the change in length Δ L \Delta L Δ L to the original length L 0 L_0 L 0 ​ : ϵ = Δ L L 0 \epsilon = \frac{\Delta L}{L_0} ϵ = L 0 ​ Δ L ​

Shear Stress ( τ \tau τ ): The force P shear P_{\text{shear}} P shear ​ acting parallel to the plane divided by the area A 0 A_0 A 0 ​ : τ = P shear A 0 \tau = \frac{P_{\text{shear}}}{A_0} τ = A 0 ​ P shear ​ ​

Shear Strain ( γ \gamma γ ): The tangent of the angular deformation under shear stress.

In the elastic region, deformation is fully reversible, and stress is proportional to strain via Hooke's Law : σ = E ϵ \sigma = E \epsilon σ = E ϵ τ = G γ \tau = G \gamma τ = G γ

where E E E is the Modulus of Elasticity (Young's Modulus) and G G G is the Shear Modulus.

Poisson's Ratio ( ν \nu ν ): The ratio of lateral (transverse) strain to axial (longitudinal) strain under uniaxial loading: ν = − ϵ lateral ϵ axial \nu = -\frac{\epsilon_{\text{lateral}}}{\epsilon_{\text{axial}}} ν = − ϵ axial ​ ϵ lateral ​ ​

The three elastic constants ( E E E , G G G , and ν \nu ν ) are related for isotropic materials by: G = E 2 ( 1 + ν ) G = \frac{E}{2(1 + \nu)} G = 2 ( 1 + ν ) E ​

As deformation proceeds past the elastic limit (yield strength), plastic (permanent) deformation occurs. During plastic deformation, the material's cross-sectional area changes significantly. To accurately describe this state, we define:

True Stress ( σ t \sigma_t σ t ​ ): The load divided by the instantaneous cross-sectional area A i A_i A i ​ : σ t = P A i = σ ( 1 + ϵ ) \sigma_t = \frac{P}{A_i} = \sigma (1 + \epsilon) σ t ​ = A i ​ P ​ = σ ( 1 + ϵ )

True Strain ( ϵ t \epsilon_t ϵ t ​ ): The sum of instantaneous strain increments: ϵ t = ln ⁡ ( L i L 0 ) = ln ⁡ ( 1 + ϵ ) \epsilon_t = \ln\left(\frac{L_i}{L_0}\right) = \ln(1 + \epsilon) ϵ t ​ = ln ( L 0 ​ L i ​ ​ ) = ln ( 1 + ϵ )

Note: These relationships between engineering and true stress/strain are valid only up to the onset of necking (the ultimate tensile strength).

  • Property Symbol FE Reference Handbook Units / Description
  • Modulus of Elasticity E E E Pascal ( Pa \text{Pa} Pa , GPa \text{GPa} GPa ); measure of stiffness
  • Shear Modulus G G G Pascal ( Pa \text{Pa} Pa , GPa \text{GPa} GPa ); resistance to shear
  • Poisson's Ratio ν \nu ν Dimensionless; typical metals range from 0.25 0.25 0.25 to 0.35 0.35 0.35
  • Yield Strength σ y \sigma_y σ y ​ Stress at which plastic deformation begins (0.2% offset)
  • Tensile Strength σ u t s \sigma_{uts} σ u t s ​ Maximum stress on the engineering stress-strain curve
  • Temperature and Pressure Effects

Mechanical performance is highly sensitive to operating temperature and pressure.

Thermal Expansion and Stress: A temperature change Δ T \Delta T Δ T causes a thermal strain ϵ T \epsilon_T ϵ T ​ : ϵ T = α Δ T \epsilon_T = \alpha \Delta T ϵ T ​ = α Δ T If a component is constrained at both ends so that it cannot expand or contract, the resulting thermal stress σ T \sigma_T σ T ​ is: σ T = − E α Δ T \sigma_T = -E \alpha \Delta T σ T ​ = − E α Δ T A positive Δ T \Delta T Δ T (heating) produces compressive stress (negative value), while cooling produces tensile stress.

Creep: Time-dependent permanent deformation that occurs under constant stress at high temperatures (typically T > 0.4 T m T > 0.4 T_m T > 0.4 T m ​ , where T m T_m T m ​ is the absolute melting temperature in Kelvin). Creep occurs in three stages: primary (decelerating rate), secondary or steady-state (constant creep rate, which is the design parameter), and tertiary (accelerating rate leading to rupture).

Ductile-to-Brittle Transition: Some metals, specifically those with body-centered cubic (BCC) crystal structures like ferritic carbon steels, exhibit a dramatic reduction in impact energy absorption at low temperatures. Below the Ductile-to-Brittle Transition Temperature (DBTT) , they fail via brittle cleavage rather than ductile shear. Face-centered cubic (FCC) metals (e.g., copper, aluminum, austenitic stainless steel) do not exhibit a DBTT and maintain ductility at cryogenic temperatures.

Material Types and Compatibilities

Materials are divided into ferrous and nonferrous families, each with specific chemical compatibilities:

Ferrous Metals:

Carbon Steels: Economical and strong, but highly susceptible to general rust and acid attack. Standard for non-corrosive hydrocarbons.

Stainless Steels: Contain ≥ 10.5 % \ge 10.5\% ≥ 10.5% Cr, forming a self-healing passive chromia ( C r 2 O 3 Cr_2O_3 C r 2 ​ O 3 ​ ) film.

Austenitic (300 series, e.g., 304, 316): FCC structure, non-magnetic, highly ductile. Prone to sensitization when heated between 500 ∘ C 500^\circ\text{C} 50 0 ∘ C and 800 ∘ C 800^\circ\text{C} 80 0 ∘ C ; chromium carbides precipitate at grain boundaries, depleting chromium in adjacent regions and causing intergranular corrosion.

Ferritic & Martensitic (400 series): BCC structure, magnetic. Ferritic grades offer good stress corrosion cracking resistance.

Cast Irons: High carbon content ( > 2 % >2\% > 2% ). Gray cast iron is brittle but has excellent vibration damping; ductile iron contains nodular graphite, improving toughness.

Nonferrous Metals:

Aluminum Alloys: FCC, lightweight, high thermal/electrical conductivity, passivated by alumina ( A l 2 O 3 Al_2O_3 A l 2 ​ O 3 ​ ). Highly sensitive to strong acids and bases.

Copper Alloys: High conductivity, resistant to biofouling. Brasses (Cu-Zn) and Bronzes (Cu-Sn).

Nickel Alloys (e.g., Inconel, Hastelloy, Monel): Engineered for extreme environments (reducing acids, hot chlorides, high temperatures).

Titanium Alloys: Exceptional strength-to-weight ratio, passivated by titania ( T i O 2 TiO_2 T i O 2 ​ ). Susceptible to crevice corrosion in hot chloride environments ( > 70 ∘ C >70^\circ\text{C} > 7 0 ∘ C ).

  • Worked Examples
  • Worked Example 1: Elastic Shear Calculations

A cylindrical structural support rod with a diameter of 12.5 mm 12.5 \text{ mm} 12.5 mm is subjected to an axial tensile load of 25 kN 25 \text{ kN} 25 kN . The material is an isotropic metal alloy with a Young's Modulus E = 110 GPa E = 110 \text{ GPa} E = 110 GPa and a Poisson's ratio ν = 0.33 \nu = 0.33 ν = 0.33 . Calculate the resulting change in diameter. Solution:

Calculate the original cross-sectional area: A 0 = π d 0 2 4 = π ( 0.0125 m ) 2 4 = 1.227 × 10 − 4 m 2 A_0 = \frac{\pi d_0^2}{4} = \frac{\pi (0.0125 \text{ m})^2}{4} = 1.227 \times 10^{-4} \text{ m}^2 A 0 ​ = 4 π d 0 2 ​ ​ = 4 π ( 0.0125 m ) 2 ​ = 1.227 × 1 0 − 4 m 2

Compute the axial stress: σ = P A 0 = 25 , 000 N 1.227 × 10 − 4 m 2 = 2.037 × 10 8 Pa = 203.7 MPa \sigma = \frac{P}{A_0} = \frac{25,000 \text{ N}}{1.227 \times 10^{-4} \text{ m}^2} = 2.037 \times 10^8 \text{ Pa} = 203.7 \text{ MPa} σ = A 0 ​ P ​ = 1.227 × 1 0 − 4 m 2 25 , 000 N ​ = 2.037 × 1 0 8 Pa = 203.7 MPa

Apply Hooke's Law to find the axial strain: ϵ axial = σ E = 2.037 × 10 8 Pa 110 × 10 9 Pa = 1.852 × 10 − 3 \epsilon_{\text{axial}} = \frac{\sigma}{E} = \frac{2.037 \times 10^8 \text{ Pa}}{110 \times 10^9 \text{ Pa}} = 1.852 \times 10^{-3} ϵ axial ​ = E σ ​ = 110 × 1 0 9 Pa 2.037 × 1 0 8 Pa ​ = 1.852 × 1 0 − 3

Calculate the lateral strain using Poisson's ratio: ϵ lateral = − ν ϵ axial = − ( 0.33 ) ( 1.852 × 10 − 3 ) = − 6.112 × 10 − 4 \epsilon_{\text{lateral}} = -\nu \epsilon_{\text{axial}} = -(0.33)(1.852 \times 10^{-3}) = -6.112 \times 10^{-4} ϵ lateral ​ = − ν ϵ axial ​ = − ( 0.33 ) ( 1.852 × 1 0 − 3 ) = − 6.112 × 1 0 − 4

Calculate the change in diameter: Δ d = d 0 ϵ lateral = ( 12.5 mm ) ( − 6.112 × 10 − 4 ) = − 7.64 × 10 − 3 mm = − 7.64 μ m \Delta d = d_0 \epsilon_{\text{lateral}} = (12.5 \text{ mm})(-6.112 \times 10^{-4}) = -7.64 \times 10^{-3} \text{ mm} = -7.64 \ \ \mu\text{m} Δ d = d 0 ​ ϵ lateral ​ = ( 12.5 mm ) ( − 6.112 × 1 0 − 4 ) = − 7.64 × 1 0 − 3 mm = − 7.64 μ m

The negative sign indicates that the rod's diameter contracts as it is pulled in tension.

Worked Example 2: Constrained Thermal Stress

An austenitic stainless steel process pipe ( E = 193 GPa E = 193 \text{ GPa} E = 193 GPa , α = 17 × 10 − 6 / ∘ C \alpha = 17 \times 10^{-6} \text{ /}^\circ\text{C} α = 17 × 1 0 − 6 / ∘ C ) is installed at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C between two rigid concrete anchor blocks. Hot reaction fluid heats the pipe to 150 ∘ C 150^\circ\text{C} 15 0 ∘ C . Calculate the thermal stress developed within the pipe wall. Solution:

Calculate the change in temperature: Δ T = 150 ∘ C − 20 ∘ C = 130 ∘ C \Delta T = 150^\circ\text{C} - 20^\circ\text{C} = 130^\circ\text{C} Δ T = 15 0 ∘ C − 2 0 ∘ C = 13 0 ∘ C

Calculate the thermal stress under rigid constraint: σ T = − E α Δ T \sigma_T = -E \alpha \Delta T σ T ​ = − E α Δ T σ T = − ( 193 × 10 9 Pa ) ( 17 × 10 − 6 / ∘ C ) ( 130 ∘ C ) \sigma_T = -(193 \times 10^9 \text{ Pa})(17 \times 10^{-6} \text{ /}^\circ\text{C})(130^\circ\text{C}) σ T ​ = − ( 193 × 1 0 9 Pa ) ( 17 × 1 0 − 6 / ∘ C ) ( 13 0 ∘ C ) σ T = − 4.265 × 10 7 Pa = − 426.5 MPa \sigma_T = -4.265 \times 10^7 \text{ Pa} = -426.5 \text{ MPa} σ T ​ = − 4.265 × 1 0 7 Pa = − 426.5 MPa

The negative sign designates a compressive stress. Because the pipe tries to expand upon heating but is constrained by the rigid anchor blocks, it is placed in compression.