Study guide
16.2 Hazard Identification and Risk Analysis
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
16.2 Hazard Identification and Risk Analysis
Key Takeaways Explain This Topic AI
Risk is quantitatively defined as the product of event frequency and consequence severity, distinguishing it from inherent chemical hazards.
HAZOP studies apply guide words (NO, MORE, LESS) to process parameters (flow, pressure, temperature) to qualitatively discover process deviations.
Layer of Protection Analysis (LOPA) is a semi-quantitative tool calculating mitigated event frequency from independent protection layer (IPL) PFDs.
Fault Tree Analysis (FTA) uses AND and OR gates to deductively map root cause probabilities to top events; Event Tree Analysis (ETA) inductively maps end-states.
Gaussian plume modeling predicts the downwind atmospheric dispersion concentration of released gases as a function of wind speed, release rate, and stability class.
Last updated: July 2026
Process safety in chemical engineering involves identifying hazards and evaluating risks to prevent catastrophic incidents such as fires, explosions, and toxic releases. A hazard is an inherent physical or chemical characteristic (such as toxicity, flammability, or high pressure) that has the potential to cause harm. Risk , by contrast, is a measure of both the probability (or frequency) of an event occurring and the severity of its consequences: Risk = Frequency × Severity \text{Risk} = \text{Frequency} \times \text{Severity} Risk = Frequency × Severity
To manage risks, chemical engineers utilize a variety of qualitative, semi-quantitative, and quantitative hazard evaluation techniques.
Hazard and Operability (HAZOP) Studies
A HAZOP study is a systematic, qualitative, team-based technique used to identify potential hazards and operability problems in a process facility. The HAZOP team examines a Process Flow Diagram (PFD) or Piping and Instrumentation Diagram (P&ID) node by node. A node is a specific section of the process with defined design intentions (e.g., a feed line, a reactor vessel).
For each node, the team combines standard guide words with process parameters to identify potential deviations from the design intent: Guide Word + Parameter = Deviation \text{Guide Word} + \text{Parameter} = \text{Deviation} Guide Word + Parameter = Deviation
Common deviations include:
NO FLOW: Caused by pump failure or a closed block valve, potentially leading to reactor starvation or loss of cooling.
MORE PRESSURE: Caused by control valve failure or external heating, potentially causing vessel rupture.
LESS TEMPERATURE: Caused by steam trap failure, potentially leading to incomplete reaction or solidification.
REVERSE FLOW: Caused by check valve failure, potentially resulting in raw materials flowing back into storage containers.
The team analyzes the causes of each deviation, evaluates the consequences, identifies existing safeguards (such as interlocks or relief valves), and recommends additional actions if the risk is unacceptable.
Layer of Protection Analysis (LOPA)
LOPA is a semi-quantitative risk assessment methodology used to evaluate the sufficiency of safeguards protecting against a specific accident scenario. It builds upon qualitative HAZOP findings. LOPA assumes that multiple independent barriers, known as Independent Protection Layers (IPLs) , must fail sequentially for an accident to occur.
To qualify as an IPL, a safeguard must be:
Specific: Designed to prevent the specific consequence.
Independent: Its operation is completely independent of the initiating event and any other IPLs.
Dependable: It can be relied upon to perform as designed.
Auditable: It can be inspected and tested regularly.
The frequency of the mitigated consequence ( f mitigated f_{\text{mitigated}} f mitigated ) is calculated using the initiating event frequency ( f IE f_{\text{IE}} f IE , in events per year) and the Probability of Failure on Demand (PFD) of each IPL: f mitigated = f IE × ∏ j = 1 m P F D j f_{\text{mitigated}} = f_{\text{IE}} \times \prod_{j=1}^m PFD_j f mitigated = f IE × j = 1 ∏ m PF D j
Typical PFD values range from 0.1 0.1 0.1 for operator response to an alarm, to 0.01 0.01 0.01 to 0.001 0.001 0.001 for safety instrumented systems (SIS) with different Safety Integrity Levels (SIL 1 to SIL 3).
Worked Example 1:
An exothermic reactor run has an initiating event of cooling pump failure, which occurs once every 5 years ( f IE = 0.2 / year f_{\text{IE}} = 0.2 / \text{year} f IE = 0.2/ year ). The safeguards in place are an operator intervention based on a high-temperature alarm ( P F D = 0.1 PFD = 0.1 PF D = 0.1 ) and a safety valve ( P F D = 0.01 PFD = 0.01 PF D = 0.01 ). Calculate the mitigated event frequency.
Identify variables: f IE = 0.2 / year f_{\text{IE}} = 0.2 / \text{year} f IE = 0.2/ year P F D 1 = 0.1 PFD_1 = 0.1 PF D 1 = 0.1 P F D 2 = 0.01 PFD_2 = 0.01 PF D 2 = 0.01
Apply LOPA product rule: f mitigated = 0.2 × 0.1 × 0.01 = 0.0002 events/year f_{\text{mitigated}} = 0.2 \times 0.1 \times 0.01 = 0.0002 \text{ events/year} f mitigated = 0.2 × 0.1 × 0.01 = 0.0002 events/year
If the facility's acceptable risk target for this consequence is 10 − 5 10^{-5} 1 0 − 5 events/year, this configuration is insufficient, and an additional IPL (such as an automatic interlock system) must be added.
Fault Tree and Event Tree Analysis
Fault Tree Analysis (FTA): A deductive, top-down quantitative method. It starts with an undesired 'Top Event' (e.g., vessel explosion) and works backward to identify the combinations of basic component failures and human errors that could cause it. FTA uses logic gates:
AND Gate: The top output event occurs only if all input events occur. For independent events, the probability is: P ( Output ) = ∏ i = 1 n P i P(\text{Output}) = \prod_{i=1}^n P_i P ( Output ) = i = 1 ∏ n P i
OR Gate: The output event occurs if any of the input events occur. For independent events: P ( Output ) = 1 − ∏ i = 1 n ( 1 − P i ) ≈ ∑ i = 1 n P i ( if P i ≪ 1 ) P(\text{Output}) = 1 - \prod_{i=1}^n (1 - P_i) \approx \sum_{i=1}^n P_i \quad (\text{if } P_i \ll 1) P ( Output ) = 1 − i = 1 ∏ n ( 1 − P i ) ≈ i = 1 ∑ n P i ( if P i ≪ 1 )
Event Tree Analysis (ETA): An inductive, bottom-up method. It begins with an 'Initiating Event' (e.g., pipe rupture) and traces the sequential success or failure of subsequent safety barriers to determine the various possible end-states and their frequencies.
Atmospheric Dispersion Modeling
When a chemical release occurs, engineers use dispersion modeling to estimate the downwind concentration of the toxic or flammable gas. The standard model is the Gaussian Plume Model , which describes the steady-state dispersion of a continuous gas release from a point source: C ( x , y , z ) = Q 2 π u σ y σ z exp ( − y 2 2 σ y 2 ) [ exp ( − ( z − H ) 2 2 σ z 2 ) + exp ( − ( z + H ) 2 2 σ z 2 ) ] C(x,y,z) = \frac{Q}{2\pi u \sigma_y \sigma_z} \exp\left( -\frac{y^2}{2\sigma_y^2} \right) \left[ \exp\left( -\frac{(z-H)^2}{2\sigma_z^2} \right) + \exp\left( -\frac{(z+H)^2}{2\sigma_z^2} \right) \right] C ( x , y , z ) = 2 π u σ y σ z Q exp ( − 2 σ y 2 y 2 ) [ exp ( − 2 σ z 2 ( z − H ) 2 ) + exp ( − 2 σ z 2 ( z + H ) 2 ) ]
where:
C ( x , y , z ) C(x,y,z) C ( x , y , z ) is the concentration ( g/m 3 \text{g/m}^3 g/m 3 ) at downwind distance x x x , crosswind distance y y y , and vertical height z z z .
Q Q Q is the source release rate ( g/s \text{g/s} g/s ).
u u u is the wind speed at stack height ( m/s \text{m/s} m/s ).
H H H is the effective stack release height ( m \text{m} m ), which is physical stack height ( h h h ) plus plume rise ( Δ h \Delta h Δ h ).
σ y , σ z \sigma_y, \sigma_z σ y , σ z are the dispersion coefficients ( m \text{m} m ), representing the standard deviation of the concentration profile. They grow with downwind distance x x x and depend on the Pasquill-Gifford atmospheric stability classes (Class A: extremely unstable, Class D: neutral, Class F: moderately stable).
At ground level directly downwind ( y = 0 y=0 y = 0 and z = 0 z=0 z = 0 ), the concentration equation simplifies to: C ( x , 0 , 0 ) = Q π u σ y σ z exp ( − H 2 2 σ z 2 ) C(x, 0, 0) = \frac{Q}{\pi u \sigma_y \sigma_z} \exp\left( -\frac{H^2}{2\sigma_z^2} \right) C ( x , 0 , 0 ) = π u σ y σ z Q exp ( − 2 σ z 2 H 2 )
Higher wind speeds ( u u u ) and unstable atmospheres (which increase σ y , σ z \sigma_y, \sigma_z σ y , σ z ) lead to rapid dilution and lower downwind concentrations. Conversely, stable atmospheric conditions (Class F, typical of clear nights with low wind) lead to minimal mixing and high toxic gas concentrations at long downwind distances.