Study guide
11.1 Particle Properties and Solid Processing
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
11.1 Particle Properties and Solid Processing
Key Takeaways Explain This Topic AI
Sphericity measures how closely a particle shape resembles a sphere and is a critical adjustment factor for particle size in packed bed pressure drop calculations.
Sieve analysis maps particle size distribution using screen mesh numbers, where larger mesh numbers designate smaller aperture widths.
The Sauter mean diameter (volume-surface mean) represents the average particle size preserving the specific surface area, vital for transport process modeling.
Comminution energy requirement is predicted by Kick's Law for coarse crushing, Rittinger's Law for fine grinding, and Bond's Law for industrial milling.
Crystallization yield for hydrate and anhydrous crystals is calculated from solubility differences at different temperatures using solvent-based mass balances.
Last updated: July 2026
- 11.1 Particle Properties and Solid Processing
- 1. Particle Shape and Sphericity
Solid particles are widely processed in chemical engineering, including pharmaceuticals, catalysts, and minerals. Unlike fluids, solid materials are discrete and heterogeneous. Sphericity, denoted by ϕ s \phi_s ϕ s , is a dimensionless parameter characterizing particle shape, defined as the ratio of the surface area of a sphere of equal volume ( V p V_p V p ) to the actual surface area of the particle ( S p S_p S p ): ϕ s = π 1 / 3 ( 6 V p ) 2 / 3 S p = 6 V p D p S p \phi_s = \frac{\pi^{1/3} (6 V_p)^{2/3}}{S_p} = \frac{6 V_p}{D_p S_p} ϕ s = S p π 1/3 ( 6 V p ) 2/3 = D p S p 6 V p
where D p D_p D p is the equivalent volume-based diameter. Sphericity ( ϕ s \phi_s ϕ s ) ranges from 0 to 1, with a perfect sphere having ϕ s = 1.0 \phi_s = 1.0 ϕ s = 1.0 . Sphericity is critical in packed bed pressure drop calculations (e.g., Ergun equation), where the effective particle size is taken as ϕ s D p \phi_s D_p ϕ s D p to account for the increased drag of non-spherical shapes.
- Particle Shape Sphericity ( ϕ s \phi_s ϕ s )
- Sphere 1.00
- Cube 0.81
- Cylinder ( L = D L = D L = D ) 0.87
- Crushed Coal 0.70
- Sand Particles 0.60 – 0.80
- 2. Sieve Analysis and Size Distributions
Sieve analysis determines particle size distributions by vibrating a solid sample through a stack of screens of decreasing aperture size (mesh numbers). A higher mesh number indicates more openings per linear inch, hence a smaller opening size. Sieve analysis data are typically represented as:
Differential Analysis: Shows the mass fraction ( x i x_i x i ) retained in each size interval. The mean size ( d p i d_{pi} d p i ) is typically the arithmetic average of the screen openings of the two bounding sieves.
Cumulative Analysis: Tracks the cumulative mass fraction of particles smaller than (or larger than) a given size. The D p , 80 D_{p,80} D p , 80 size represents the sieve opening through which 80% of the material passes, which is a key metric in size reduction.
3. Bulk Mean Diameters
When analyzing mixtures of particles of varying sizes, several statistical mean diameters are defined. The two most common are:
Arithmetic Mean Diameter ( d N d_N d N ): Simple number-average diameter: d N = ∑ N i d p i ∑ N i d_N = \frac{\sum N_i d_{pi}}{\sum N_i} d N = ∑ N i ∑ N i d p i
where N i N_i N i is the particle count in size interval i i i of mean diameter d p i d_{pi} d p i .
Volume-Surface (Sauter) Mean Diameter ( d v s d_{vs} d v s ): Preserves the specific surface-area-to-volume ratio of the bulk mixture: d v s = 1 ∑ i = 1 n x i d p i d_{vs} = \frac{1}{\sum_{i=1}^n \frac{x_i}{d_{pi}}} d v s = ∑ i = 1 n d p i x i 1
where x i x_i x i is the mass fraction of particles in size interval i i i . This is widely used in packed-bed pressure drop and fluidization calculations since fluid drag is a surface phenomenon.
4. Particle Forces and Angle of Repose
Solid particles are influenced by gravitational forces (dominant for particles > 100 μ m >100\ \mu\text{m} > 100 μ m ), fluid drag, buoyancy, electrostatic forces, and cohesive van der Waals forces. For fine particles ( D p < 10 μ m D_p < 10\ \mu\text{m} D p < 10 μ m ), cohesive forces dominate, causing agglomeration.
The angle of repose ( θ \theta θ ) is the steepest angle relative to the horizontal to which bulk solids can be piled without slumping: tan ( θ ) = H R \tan(\theta) = \frac{H}{R} tan ( θ ) = R H
where H H H is the conical pile height and R R R is the base radius. Free-flowing materials have low angles ( 20 ∘ − 30 ∘ 20^\circ - 30^\circ 2 0 ∘ − 3 0 ∘ ), whereas cohesive materials have high angles ( > 45 ∘ >45^\circ > 4 5 ∘ ).
5. Size Reduction (Comminution)
Comminution is the mechanical process of reducing particle size through crushing or grinding. Three empirical laws relate specific energy ( E E E , kWh/short ton \text{kWh/short ton} kWh/short ton ) to feed size ( D 1 D_1 D 1 ) and product size ( D 2 D_2 D 2 ):
Kick's Law: Assumes energy is proportional to the log reduction ratio. Used for coarse crushing ( D > 50 mm D > 50\text{ mm} D > 50 mm ): E = K K ln ( D 1 D 2 ) E = K_K \ln\left(\frac{D_1}{D_2}\right) E = K K ln ( D 2 D 1 )
Rittinger's Law: Assumes energy is proportional to the new surface area created. Used for fine grinding ( D < 0.1 mm D < 0.1\text{ mm} D < 0.1 mm ): E = K R ( 1 D 2 − 1 D 1 ) E = K_R \left(\frac{1}{D_2} - \frac{1}{D_1}\right) E = K R ( D 2 1 − D 1 1 )
Bond's Law: Assumes energy is proportional to crack length. Widely used for industrial mill sizing: E = 10 W i ( 1 D 2 − 1 D 1 ) E = 10 W_i \left( \frac{1}{\sqrt{D_2}} - \frac{1}{\sqrt{D_1}} \right) E = 10 W i ( D 2 1 − D 1 1 )
where W i W_i W i is the Bond Work Index, representing the energy required to reduce the material from infinite size to 80% passing 100 μ m 100\ \mu\text{m} 100 μ m . Crucially, in Bond's equation, D 1 D_1 D 1 and D 2 D_2 D 2 must be in micrometers ( μ m \mu\text{m} μ m ).
6. Crystallization
Crystallization is a separation process that produces high-purity solids from a liquid solution. The driving force is supersaturation, defined as: Δ C = C − C ∗ \Delta C = C - C^* Δ C = C − C ∗
Crystallization proceeds via nucleation and crystal growth. For a cooling crystallizer without solvent evaporation, the yield of hydrated crystals ( C y C_y C y ) is calculated by a mass balance: C y = R ⋅ M s ( x 1 − x 2 ) 1 − x 2 ( R − 1 ) C_y = R \cdot \frac{M_s (x_1 - x_2)}{1 - x_2(R-1)} C y = R ⋅ 1 − x 2 ( R − 1 ) M s ( x 1 − x 2 )
where M s M_s M s is the mass of solvent, x 1 x_1 x 1 and x 2 x_2 x 2 are the initial and final solubilities (kg anhydrous solute/kg solvent), and R R R is the hydrate-to-anhydrous molecular weight ratio: R = M hydrate M anhydrous R = \frac{M_{\text{hydrate}}}{M_{\text{anhydrous}}} R = M anhydrous M hydrate
If the product is anhydrous, R = 1 R = 1 R = 1 and the equation simplifies to C y = M s ( x 1 − x 2 ) C_y = M_s (x_1 - x_2) C y = M s ( x 1 − x 2 ) .
7. Worked Examples
Example 1: Sauter Mean Diameter Calculation A mixture of catalyst particles is analyzed by sieving, yielding the following size fractions:
- 30 % 30\% 30% by weight has a mean size of 1.5 mm 1.5\text{ mm} 1.5 mm
- 50 % 50\% 50% by weight has a mean size of 1.0 mm 1.0\text{ mm} 1.0 mm
20 % 20\% 20% by weight has a mean size of 0.5 mm 0.5\text{ mm} 0.5 mm Calculate the Sauter mean diameter ( d v s d_{vs} d v s ) of the mixture in mm. Solution: ∑ i = 1 3 x i d p i = 0.30 1.5 mm + 0.50 1.0 mm + 0.20 0.5 mm = 1.10 mm − 1 \sum_{i=1}^3 \frac{x_i}{d_{pi}} = \frac{0.30}{1.5\text{ mm}} + \frac{0.50}{1.0\text{ mm}} + \frac{0.20}{0.5\text{ mm}} = 1.10\text{ mm}^{-1} i = 1 ∑ 3 d p i x i = 1.5 mm 0.30 + 1.0 mm 0.50 + 0.5 mm 0.20 = 1.10 mm − 1 d v s = 1 1.10 mm − 1 ≈ 0.909 mm d_{vs} = \frac{1}{1.10\text{ mm}^{-1}} \approx 0.909\text{ mm} d v s = 1.10 mm − 1 1 ≈ 0.909 mm
Example 2: Size Reduction Energy Requirement A mineral ore has a Bond Work Index ( W i W_i W i ) of 14.2 kWh/short ton 14.2\text{ kWh/short ton} 14.2 kWh/short ton . Calculate the power in kW required to crush 80 short tons/hour 80\text{ short tons/hour} 80 short tons/hour of this ore from an 80% passing feed size of 16 mm 16\text{ mm} 16 mm ( 16 , 000 μ m 16,000\ \mu\text{m} 16 , 000 μ m ) to an 80% passing product size of 2.5 mm 2.5\text{ mm} 2.5 mm ( 2 , 500 μ m 2,500\ \mu\text{m} 2 , 500 μ m ). Solution: Calculate the specific energy required per short ton: E = 10 ⋅ 14.2 ⋅ ( 1 2 , 500 − 1 16 , 000 ) E = 10 \cdot 14.2 \cdot \left( \frac{1}{\sqrt{2,500}} - \frac{1}{\sqrt{16,000}} \right) E = 10 ⋅ 14.2 ⋅ ( 2 , 500 1 − 16 , 000 1 ) E = 142 ⋅ ( 1 50 − 1 126.49 ) = 1.718 kWh/short ton E = 142 \cdot \left( \frac{1}{50} - \frac{1}{126.49} \right) = 1.718\text{ kWh/short ton} E = 142 ⋅ ( 50 1 − 126.49 1 ) = 1.718 kWh/short ton
Calculate the total power required: P = 1.718 kWh/short ton ⋅ 80 short tons/hour = 137.4 kW P = 1.718\text{ kWh/short ton} \cdot 80\text{ short tons/hour} = 137.4\text{ kW} P = 1.718 kWh/short ton ⋅ 80 short tons/hour = 137.4 kW