Study guide
7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
Key Takeaways Explain This Topic AI
The equilibrium constant Keq is calculated from standard Gibbs free energy of reaction: delta G_rxn_dec = -R * T * ln(Keq).
The van 't Hoff equation describes temperature effects on Keq; increasing temperature shifts endothermic reactions forward and exothermic reactions backward.
Kirchhoff's Law corrects the standard enthalpy of reaction for temperature deviations using delta Cp values.
Ideal mixtures have zero enthalpy of mixing and volume change, whereas non-ideal solutions have non-zero excess properties.
Partial molar properties represent the molar contribution of a species to a mixture, related through the Gibbs-Duhem equation.
Last updated: July 2026
Chemical Reaction Equilibrium
Chemical reaction equilibrium calculations determine the maximum possible conversion (thermodynamic limit) of a chemical reaction at given operating conditions. The fundamental criterion for chemical equilibrium is that the total Gibbs free energy of the system is minimized at constant temperature and pressure. For a general reaction ∑ ν i A i = 0 \sum \nu_i A_i = 0 ∑ ν i A i = 0 (where stoichiometric coefficients ν i \nu_i ν i are positive for products and negative for reactants), the standard Gibbs free energy change of reaction ( Δ G r x n ∘ \Delta G_{rxn}^\circ Δ G r x n ∘ ) is calculated from the standard Gibbs free energies of formation ( Δ G f , i ∘ \Delta G_{f,i}^\circ Δ G f , i ∘ ) found in reference tables: Δ G r x n ∘ = ∑ ν i Δ G f , i ∘ \Delta G_{rxn}^\circ = \sum \nu_i \Delta G_{f,i}^\circ Δ G r x n ∘ = ∑ ν i Δ G f , i ∘
The equilibrium constant ( K e q K_{eq} K e q ) is directly related to the standard Gibbs free energy change by: Δ G r x n ∘ = − R T ln K e q ⟹ K e q = exp ( − Δ G r x n ∘ R T ) \Delta G_{rxn}^\circ = -RT \ln K_{eq} \implies K_{eq} = \exp\left(-\frac{\Delta G_{rxn}^\circ}{RT}\right) Δ G r x n ∘ = − RT ln K e q ⟹ K e q = exp ( − RT Δ G r x n ∘ )
where R R R is the universal gas constant and T T T is the absolute temperature. The equilibrium constant is defined in terms of the activities ( a i a_i a i ) of the reacting species: K e q = ∏ ( a i ) ν i K_{eq} = \prod (a_i)^{\nu_i} K e q = ∏ ( a i ) ν i
For an ideal gas mixture, the activity of species i i i is a i = y i P / P ∘ a_i = y_i P / P^\circ a i = y i P / P ∘ , where P ∘ P^\circ P ∘ is the standard-state pressure ( 1 bar 1 \text{ bar} 1 bar or 100 kPa 100 \text{ kPa} 100 kPa ). This gives: K e q = ( P P ∘ ) ∑ ν i ∏ ( y i ) ν i = ( P P ∘ ) Δ ν K y K_{eq} = \left(\frac{P}{P^\circ}\right)^{\sum \nu_i} \prod (y_i)^{\nu_i} = \left(\frac{P}{P^\circ}\right)^{\Delta \nu} K_y K e q = ( P ∘ P ) ∑ ν i ∏ ( y i ) ν i = ( P ∘ P ) Δ ν K y
where Δ ν = ∑ ν i \Delta \nu = \sum \nu_i Δ ν = ∑ ν i is the change in the total number of moles of gas. Note that if Δ ν > 0 \Delta \nu > 0 Δ ν > 0 , increasing the system pressure P P P will decrease the equilibrium mole fraction constant K y K_y K y , thereby decreasing the equilibrium conversion (Le Chatelier's Principle).
Temperature Effects: The van 't Hoff Equation
The standard Gibbs free energy change, and therefore K e q K_{eq} K e q , is a function of temperature. The effect of temperature on the equilibrium constant is quantitatively described by the van 't Hoff equation : d ( ln K e q ) d T = Δ H r x n ∘ R T 2 \frac{d(\ln K_{eq})}{dT} = \frac{\Delta H_{rxn}^\circ}{R T^2} d T d ( ln K e q ) = R T 2 Δ H r x n ∘
where Δ H r x n ∘ \Delta H_{rxn}^\circ Δ H r x n ∘ is the standard enthalpy of reaction. Assuming Δ H r x n ∘ \Delta H_{rxn}^\circ Δ H r x n ∘ is approximately constant over a moderate temperature range, integrating the van 't Hoff equation from T 1 T_1 T 1 to T 2 T_2 T 2 yields: ln ( K e q ( T 2 ) K e q ( T 1 ) ) = − Δ H r x n ∘ R ( 1 T 2 − 1 T 1 ) \ln\left(\frac{K_{eq}(T_2)}{K_{eq}(T_1)}\right) = -\frac{\Delta H_{rxn}^\circ}{R} \left(\frac{1}{T_2} - \frac{1}{T_1}\right) ln ( K e q ( T 1 ) K e q ( T 2 ) ) = − R Δ H r x n ∘ ( T 2 1 − T 1 1 )
This relationship reveals that:
For endothermic reactions ( Δ H r x n ∘ > 0 \Delta H_{rxn}^\circ > 0 Δ H r x n ∘ > 0 ), K e q K_{eq} K e q increases as temperature increases, shifting the equilibrium toward the products.
For exothermic reactions ( Δ H r x n ∘ < 0 \Delta H_{rxn}^\circ < 0 Δ H r x n ∘ < 0 ), K e q K_{eq} K e q decreases as temperature increases, shifting the equilibrium toward the reactants.
Heats of Reaction and Temperature Dependence
The standard heat of reaction ( Δ H r x n ∘ \Delta H_{rxn}^\circ Δ H r x n ∘ ) is calculated from standard heats of formation ( Δ H f , i ∘ \Delta H_{f,i}^\circ Δ H f , i ∘ ): Δ H r x n ∘ = ∑ ν i Δ H f , i ∘ \Delta H_{rxn}^\circ = \sum \nu_i \Delta H_{f,i}^\circ Δ H r x n ∘ = ∑ ν i Δ H f , i ∘
To determine the heat of reaction at a temperature other than the standard state temperature ( T ∘ = 298.15 K T^\circ = 298.15 \text{ K} T ∘ = 298.15 K ), we apply Kirchhoff's Law : Δ H r x n ∘ ( T ) = Δ H r x n ∘ ( T ∘ ) + ∫ T ∘ T Δ C p d T \Delta H_{rxn}^\circ(T) = \Delta H_{rxn}^\circ(T^\circ) + \int_{T^\circ}^T \Delta C_p dT Δ H r x n ∘ ( T ) = Δ H r x n ∘ ( T ∘ ) + ∫ T ∘ T Δ C p d T
where Δ C p = ∑ ν i C p , i ( T ) \Delta C_p = \sum \nu_i C_{p,i}(T) Δ C p = ∑ ν i C p , i ( T ) is the change in heat capacity upon reaction. If the heat capacities are functions of temperature (typically expressed as polynomials C p , i = a i + b i T + c i T 2 + d i T 3 C_{p,i} = a_i + b_i T + c_i T^2 + d_i T^3 C p , i = a i + b i T + c i T 2 + d i T 3 ), Δ C p \Delta C_p Δ C p must be integrated accordingly.
Thermodynamics of Mixing
When pure substances are mixed to form a solution, the thermodynamic properties change. For an ideal solution , the molecules of different species are similar in size and chemical nature, resulting in zero heat of mixing ( Δ H m i x = 0 \Delta H_{mix} = 0 Δ H mi x = 0 ) and zero volume change on mixing ( Δ V m i x = 0 \Delta V_{mix} = 0 Δ V mi x = 0 ). The entropy and Gibbs free energy of mixing for an ideal solution are: Δ S m i x ideal = − R ∑ x i ln x i > 0 \Delta S_{mix}^{\text{ideal}} = -R \sum x_i \ln x_i > 0 Δ S mi x ideal = − R ∑ x i ln x i > 0 Δ G m i x ideal = R T ∑ x i ln x i < 0 \Delta G_{mix}^{\text{ideal}} = RT \sum x_i \ln x_i < 0 Δ G mi x ideal = RT ∑ x i ln x i < 0
For non-ideal solutions, we define excess properties ( M E M^E M E ) as the difference between the actual solution property ( M M M ) and that of an ideal solution ( M ideal M^{\text{ideal}} M ideal ) at the same temperature, pressure, and composition. The heat of mixing is equal to the excess enthalpy of the solution: Δ H m i x = H E = H − ∑ x i H i \Delta H_{mix} = H^E = H - \sum x_i H_i Δ H mi x = H E = H − ∑ x i H i
Partial Molar Properties
In a mixture, the contribution of a single mole of component i i i to the total property M M M (such as volume, enthalpy, or Gibbs free energy) is described by its partial molar property ( M ˉ i \bar{M}_i M ˉ i ) : M ˉ i = ( ∂ ( n M ) ∂ n i ) T , P , n j ≠ i \bar{M}_i = \left(\frac{\partial (n M)}{\partial n_i}\right)_{T, P, n_{j \ne i}} M ˉ i = ( ∂ n i ∂ ( n M ) ) T , P , n j = i
The chemical potential μ i \mu_i μ i is simply the partial molar Gibbs free energy ( G ˉ i \bar{G}_i G ˉ i ).
The total property of a solution is calculated from the partial molar properties via the summability relation : n M = ∑ n i M ˉ i ⟹ M = ∑ x i M ˉ i nM = \sum n_i \bar{M}_i \implies M = \sum x_i \bar{M}_i n M = ∑ n i M ˉ i ⟹ M = ∑ x i M ˉ i
The changes in partial molar properties are constrained by the Gibbs-Duhem equation . At constant temperature and pressure, the Gibbs-Duhem relation is: ∑ x i d M ˉ i = 0 \sum x_i d\bar{M}_i = 0 ∑ x i d M ˉ i = 0
For a binary mixture, this simplifies to: x 1 d M ˉ 1 + x 2 d M ˉ 2 = 0 ⟹ x 1 d M ˉ 1 d x 1 + x 2 d M ˉ 2 d x 1 = 0 x_1 d\bar{M}_1 + x_2 d\bar{M}_2 = 0 \implies x_1 \frac{d\bar{M}_1}{dx_1} + x_2 \frac{d\bar{M}_2}{dx_1} = 0 x 1 d M ˉ 1 + x 2 d M ˉ 2 = 0 ⟹ x 1 d x 1 d M ˉ 1 + x 2 d x 1 d M ˉ 2 = 0
This relationship shows that the partial molar properties of components in a mixture cannot change independently; if one increases, the other must decrease.
Worked Example: van 't Hoff Temperature Correction
For the water-gas shift reaction ( C O + H 2 O ⇌ C O 2 + H 2 CO + H_2O \rightleftharpoons CO_2 + H_2 CO + H 2 O ⇌ C O 2 + H 2 ), the equilibrium constant is K e q = 22.4 K_{eq} = 22.4 K e q = 22.4 at 600 K 600\text{ K} 600 K . The standard enthalpy of reaction is constant over the temperature range at Δ H r x n ∘ = − 41.2 kJ/mol = − 41200 J/mol \Delta H_{rxn}^\circ = -41.2\text{ kJ/mol} = -41200\text{ J/mol} Δ H r x n ∘ = − 41.2 kJ/mol = − 41200 J/mol . Calculate the equilibrium constant at 800 K 800\text{ K} 800 K . The universal gas constant is R = 8.314 J/(mol ⋅ K) R = 8.314\text{ J/(mol}\cdot\text{K)} R = 8.314 J/(mol ⋅ K) .
Step 1: Write down the integrated van 't Hoff equation. ln ( K e q ( T 2 ) K e q ( T 1 ) ) = − Δ H r x n ∘ R ( 1 T 2 − 1 T 1 ) \ln\left(\frac{K_{eq}(T_2)}{K_{eq}(T_1)}\right) = -\frac{\Delta H_{rxn}^\circ}{R} \left(\frac{1}{T_2} - \frac{1}{T_1}\right) ln ( K e q ( T 1 ) K e q ( T 2 ) ) = − R Δ H r x n ∘ ( T 2 1 − T 1 1 )
Step 2: Substitute the known values. T 1 = 600 K , K e q ( T 1 ) = 22.4 T_1 = 600 \text{ K}, \quad K_{eq}(T_1) = 22.4 T 1 = 600 K , K e q ( T 1 ) = 22.4 T 2 = 800 K T_2 = 800 \text{ K} T 2 = 800 K ln ( K e q ( 800 K ) 22.4 ) = − − 41200 J/mol 8.314 J/(mol ⋅ K) ( 1 800 K − 1 600 K ) \ln\left(\frac{K_{eq}(800\text{ K})}{22.4}\right) = -\frac{-41200 \text{ J/mol}}{8.314 \text{ J/(mol}\cdot\text{K)}} \left(\frac{1}{800 \text{ K}} - \frac{1}{600 \text{ K}}\right) ln ( 22.4 K e q ( 800 K ) ) = − 8.314 J/(mol ⋅ K) − 41200 J/mol ( 800 K 1 − 600 K 1 )
Step 3: Solve the arithmetic. 1 800 − 1 600 = 0.00125 − 0.001667 = − 0.0004167 K − 1 \frac{1}{800} - \frac{1}{600} = 0.00125 - 0.001667 = -0.0004167 \text{ K}^{-1} 800 1 − 600 1 = 0.00125 − 0.001667 = − 0.0004167 K − 1 ln ( K e q ( 800 K ) 22.4 ) = 4955.5 × ( − 0.0004167 ) ≈ − 2.065 \ln\left(\frac{K_{eq}(800\text{ K})}{22.4}\right) = 4955.5 \times (-0.0004167) \approx -2.065 ln ( 22.4 K e q ( 800 K ) ) = 4955.5 × ( − 0.0004167 ) ≈ − 2.065
Step 4: Exponentiate to find K e q ( 800 K ) K_{eq}(800\text{ K}) K e q ( 800 K ) . K e q ( 800 K ) 22.4 = exp ( − 2.065 ) ≈ 0.1268 \frac{K_{eq}(800\text{ K})}{22.4} = \exp(-2.065) \approx 0.1268 22.4 K e q ( 800 K ) = exp ( − 2.065 ) ≈ 0.1268 K e q ( 800 K ) = 22.4 × 0.1268 ≈ 2.84 K_{eq}(800\text{ K}) = 22.4 \times 0.1268 \approx 2.84 K e q ( 800 K ) = 22.4 × 0.1268 ≈ 2.84
As expected for an exothermic reaction, raising the temperature from 600 K 600\text{ K} 600 K to 800 K 800\text{ K} 800 K significantly reduces the equilibrium constant from 22.4 22.4 22.4 to 2.84 2.84 2.84 , meaning that the equilibrium composition shifts toward the reactants, reducing the maximum conversion of carbon monoxide.