Study guide
7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium
Key Takeaways Explain This Topic AI
Vapor-liquid equilibrium is characterized by the equality of temperature, pressure, and chemical potentials (fugacities) for each component.
Raoult's Law (y_i * P = x_i * P_i_sat) holds for ideal solutions; non-ideal systems require activity coefficients (gamma_i) in Modified Raoult's Law.
Antoine Equation parameters must be carefully handled with respect to units of pressure and temperature from handbook tables.
Activity coefficients can be calculated from excess Gibbs free energy models like Margules or van Laar equations.
Azeotropes represent points where liquid and vapor compositions are identical (y_i = x_i), preventing separation by simple distillation.
Last updated: July 2026
Thermodynamics of Phase Equilibrium
Phase equilibrium is of paramount importance in chemical engineering separation processes such as distillation, absorption, and extraction. For a system containing multiple species in multiple phases at equilibrium, the temperature and pressure must be uniform throughout all phases, and the chemical potential ( μ i \mu_i μ i ) of each species i i i must be equal in every phase. Because chemical potential approaches negative infinity as concentration approaches zero, Gilbert Lewis introduced fugacity ( f i f_i f i ) , which acts as a 'corrected pressure' and has units of pressure. The criterion for phase equilibrium in a vapor-liquid system is: f ^ i v = f ^ i l \hat{f}_i^v = \hat{f}_i^l f ^ i v = f ^ i l
where f ^ i v \hat{f}_i^v f ^ i v and f ^ i l \hat{f}_i^l f ^ i l are the fugacities of species i i i in the vapor and liquid mixtures, respectively.
The vapor-phase fugacity of species i i i is related to its mole fraction y i y_i y i and the system pressure P P P by: f ^ i v = y i ϕ ^ i P \hat{f}_i^v = y_i \hat{\phi}_i P f ^ i v = y i ϕ ^ i P
where ϕ ^ i \hat{\phi}_i ϕ ^ i is the mixture fugacity coefficient, which accounts for vapor-phase non-idealities. For an ideal gas, ϕ ^ i = 1 \hat{\phi}_i = 1 ϕ ^ i = 1 , and f ^ i v = y i P \hat{f}_i^v = y_i P f ^ i v = y i P (the partial pressure).
The liquid-phase fugacity of species i i i is related to its liquid mole fraction x i x_i x i and its pure liquid fugacity by: f ^ i l = x i γ i f i sat exp [ V i l ( P − P i sat ) R T ] \hat{f}_i^l = x_i \gamma_i f_i^{\text{sat}} \exp\left[\frac{V_i^l(P - P_i^{\text{sat}})}{RT}\right] f ^ i l = x i γ i f i sat exp [ RT V i l ( P − P i sat ) ]
where γ i \gamma_i γ i is the activity coefficient (which accounts for liquid-phase non-idealities due to intermolecular interactions), f i sat f_i^{\text{sat}} f i sat is the fugacity of pure species i i i at its vapor pressure P i sat P_i^{\text{sat}} P i sat , and the exponential term is the Poynting correction (accounting for pressure effects on liquid volume V i l V_i^l V i l ). At low to moderate pressures, the Poynting correction is very close to 1.0 1.0 1.0 , and the pure saturated fugacity is approximately equal to P i sat P_i^{\text{sat}} P i sat . This simplifies the liquid fugacity to: f ^ i l = x i γ i P i sat \hat{f}_i^l = x_i \gamma_i P_i^{\text{sat}} f ^ i l = x i γ i P i sat
Equating vapor and liquid fugacities under these conditions yields Modified Raoult's Law : y i P = x i γ i P i sat y_i P = x_i \gamma_i P_i^{\text{sat}} y i P = x i γ i P i sat
Ideal Systems: Raoult's Law and Henry's Law
For an ideal liquid solution, the activity coefficients are γ i = 1.0 \gamma_i = 1.0 γ i = 1.0 for all components. Modified Raoult's Law simplifies to Raoult's Law : y i P = x i P i sat y_i P = x_i P_i^{\text{sat}} y i P = x i P i sat
Raoult's Law is applicable when the components are chemically similar (e.g., benzene and toluene). The vapor pressure P i sat P_i^{\text{sat}} P i sat is typically calculated using the Antoine Equation : ln P i sat = A i − B i T + C i \ln P_i^{\text{sat}} = A_i - \frac{B_i}{T + C_i} ln P i sat = A i − T + C i B i
where A i , B i , C i A_i, B_i, C_i A i , B i , C i are species-specific constants. Candidates must check the units of P P P and T T T specified in the handbook tables for these constants.
For highly dilute solutions (as x i → 0 x_i \to 0 x i → 0 for a solute), the solute molecules are surrounded entirely by solvent molecules, leading to behavior that deviates from Raoult's Law. In this region, Henry's Law is applied: y i P = x i H i y_i P = x_i \mathcal{H}_i y i P = x i H i
where H i \mathcal{H}_i H i is the Henry's law constant for solute i i i in the solvent.
Activity Coefficient Models
In non-ideal liquid mixtures, activity coefficients describe how the mixture behaves relative to an ideal solution. They are mathematically related to the excess Gibbs free energy ( G E G^E G E ) of the mixture: ln γ i = [ ∂ ( n G E / R T ) ∂ n i ] T , P , n j ≠ i \ln \gamma_i = \left[\frac{\partial (n G^E / RT)}{\partial n_i}\right]_{T,P,n_{j \ne i}} ln γ i = [ ∂ n i ∂ ( n G E / RT ) ] T , P , n j = i
Several semi-empirical equations are used to model G E G^E G E and predict activity coefficients as a function of liquid composition:
Margules Equation (Symmetric, Binary): Assuming a symmetric behavior: ln γ 1 = A x 2 2 , ln γ 2 = A x 1 2 \ln \gamma_1 = A x_2^2, \quad \ln \gamma_2 = A x_1^2 ln γ 1 = A x 2 2 , ln γ 2 = A x 1 2 where A A A is a parameter related to the molecular interactions. For asymmetric systems, the two-parameter Margules equations are: ln γ 1 = x 2 2 [ A 12 + 2 ( A 21 − A 12 ) x 1 ] \ln \gamma_1 = x_2^2 [A_{12} + 2(A_{21} - A_{12})x_1] ln γ 1 = x 2 2 [ A 12 + 2 ( A 21 − A 12 ) x 1 ] ln γ 2 = x 1 2 [ A 21 + 2 ( A 12 − A 21 ) x 2 ] \ln \gamma_2 = x_1^2 [A_{21} + 2(A_{12} - A_{21})x_2] ln γ 2 = x 1 2 [ A 21 + 2 ( A 12 − A 21 ) x 2 ]
van Laar Equation (Binary): ln γ 1 = A 12 ( 1 + A 12 x 1 A 21 x 2 ) 2 , ln γ 2 = A 21 ( 1 + A 21 x 2 A 12 x 1 ) 2 \ln \gamma_1 = \frac{A_{12}}{\left(1 + \frac{A_{12} x_1}{A_{21} x_2}\right)^2}, \quad \ln \gamma_2 = \frac{A_{21}}{\left(1 + \frac{A_{21} x_2}{A_{12} x_1}\right)^2} ln γ 1 = ( 1 + A 21 x 2 A 12 x 1 ) 2 A 12 , ln γ 2 = ( 1 + A 12 x 1 A 21 x 2 ) 2 A 21
Bubble and Dew Point Calculations
VLE calculations generally fall into bubble point or dew point categories. The equilibrium ratio is defined as K i = y i / x i K_i = y_i / x_i K i = y i / x i . Under Raoult's Law, K i = P i sat / P K_i = P_i^{\text{sat}}/P K i = P i sat / P .
Bubble Point Pressure: Given liquid compositions x i x_i x i and temperature T T T (so P i sat P_i^{\text{sat}} P i sat are known). Since ∑ y i = 1 \sum y_i = 1 ∑ y i = 1 , we have: P = ∑ x i γ i P i sat P = \sum x_i \gamma_i P_i^{\text{sat}} P = ∑ x i γ i P i sat
Dew Point Pressure: Given vapor compositions y i y_i y i and temperature T T T . Since ∑ x i = 1 \sum x_i = 1 ∑ x i = 1 , we have: P = 1 ∑ ( y i γ i P i sat ) P = \frac{1}{\sum \left(\frac{y_i}{\gamma_i P_i^{\text{sat}}}\right)} P = ∑ ( γ i P i sat y i ) 1
Bubble/Dew Point Temperature: Require iterative solutions because P i sat P_i^{\text{sat}} P i sat is a non-linear function of T T T via the Antoine equation. We solve ∑ x i K i = 1 \sum x_i K_i = 1 ∑ x i K i = 1 for bubble T T T , or ∑ ( y i / K i ) = 1 \sum (y_i/K_i) = 1 ∑ ( y i / K i ) = 1 for dew T T T .
VLE Diagrams and Azeotropes
Vapour-liquid equilibrium behavior is visualized using phase diagrams:
T − x − y T-x-y T − x − y Diagram (Constant P P P ): Temperature is plotted on the y-axis, and mole fraction is on the x-axis. The lower curve is the bubble-point line (saturated liquid) and the upper curve is the dew-point line (saturated vapor).
P − x − y P-x-y P − x − y Diagram (Constant T T T ): Pressure is plotted on the y-axis. The upper curve is the bubble-point line and the lower curve is the dew-point line.
x − y x-y x − y Diagram: Vapor fraction y 1 y_1 y 1 is plotted against liquid fraction x 1 x_1 x 1 .
An azeotrope is a mixture that boils at a constant temperature and has the same composition in both the liquid and vapor phases ( y i = x i y_i = x_i y i = x i ). At an azeotropic point: γ i P i sat = P \gamma_i P_i^{\text{sat}} = P γ i P i sat = P
Azeotropes cannot be separated by simple distillation because the vapor has the same composition as the liquid.
Worked Example: Binary Bubble Point Pressure
A liquid mixture contains 40 mol% benzene (1) and 60 mol% toluene (2). At 80 ∘ C 80^\circ\text{C} 8 0 ∘ C , the vapor pressures of pure benzene and toluene are P 1 sat = 101.3 kPa P_1^{\text{sat}} = 101.3\text{ kPa} P 1 sat = 101.3 kPa and P 2 sat = 39.9 kPa P_2^{\text{sat}} = 39.9\text{ kPa} P 2 sat = 39.9 kPa , respectively. Assuming the mixture forms an ideal solution, calculate the bubble point pressure of the mixture and the composition of the vapor phase in equilibrium with the liquid.
Step 1: Identify the given data. x 1 = 0.40 , x 2 = 0.60 x_1 = 0.40, \quad x_2 = 0.60 x 1 = 0.40 , x 2 = 0.60 P 1 sat = 101.3 kPa , P 2 sat = 39.9 kPa P_1^{\text{sat}} = 101.3 \text{ kPa}, \quad P_2^{\text{sat}} = 39.9 \text{ kPa} P 1 sat = 101.3 kPa , P 2 sat = 39.9 kPa
Since the solution is ideal, γ 1 = γ 2 = 1.0 \gamma_1 = \gamma_2 = 1.0 γ 1 = γ 2 = 1.0 .
Step 2: Calculate the bubble point pressure ( P P P ). P = x 1 P 1 sat + x 2 P 2 sat P = x_1 P_1^{\text{sat}} + x_2 P_2^{\text{sat}} P = x 1 P 1 sat + x 2 P 2 sat P = ( 0.40 × 101.3 kPa ) + ( 0.60 × 39.9 kPa ) P = (0.40 \times 101.3 \text{ kPa}) + (0.60 \times 39.9 \text{ kPa}) P = ( 0.40 × 101.3 kPa ) + ( 0.60 × 39.9 kPa ) P = 40.52 kPa + 23.94 kPa = 64.46 kPa P = 40.52 \text{ kPa} + 23.94 \text{ kPa} = 64.46 \text{ kPa} P = 40.52 kPa + 23.94 kPa = 64.46 kPa
The bubble point pressure is 64.46 kPa 64.46\text{ kPa} 64.46 kPa .
Step 3: Calculate the equilibrium vapor composition ( y 1 y_1 y 1 and y 2 y_2 y 2 ). Using Raoult's Law ( y i = x i P i sat / P y_i = x_i P_i^{\text{sat}}/P y i = x i P i sat / P ): y 1 = x 1 P 1 sat P = 40.52 kPa 64.46 kPa ≈ 0.629 y_1 = \frac{x_1 P_1^{\text{sat}}}{P} = \frac{40.52 \text{ kPa}}{64.46 \text{ kPa}} \approx 0.629 y 1 = P x 1 P 1 sat = 64.46 kPa 40.52 kPa ≈ 0.629 y 2 = 1 − y 1 = 1 − 0.629 = 0.371 y_2 = 1 - y_1 = 1 - 0.629 = 0.371 y 2 = 1 − y 1 = 1 − 0.629 = 0.371
The vapor phase is enriched in benzene ( 62.9 mol % 62.9\text{ mol}\% 62.9 mol % ), which is the more volatile component (having a higher vapor pressure). This concentration difference is the basis for separation in distillation columns.