Study guide
7.1 Thermodynamic Properties, Ideal Gas, and State Equations
NCEES Fundamentals of Engineering FE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Mathematics
1.1 Analytic Geometry, Algebra, and Trigonometry 1.2 Calculus and Differential Equations 1.3 Numerical Methods and Measurement Error
2 Chapter 2: Probability and Statistics
2.1 Probability Distributions, Central Tendency, and Regression 2.2 Hypothesis Testing, ANOVA, and Statistical Quality Control
3 Chapter 3: Engineering Sciences
3.1 Mechanics and Dynamics 3.2 Electrical Circuits and Laws
4 Chapter 4: Materials Science
4.1 Material Properties and Compatibilities 4.2 Corrosion, Polymers, Ceramics, and Composites
5 Chapter 5: Chemistry and Biology
5.1 Stoichiometry, Analytical Chemistry, and Chemical Equilibrium 5.2 Organic Chemistry and Nomenclature 5.3 Biological Systems and Kinetics
6 Chapter 6: Fluid Mechanics and Dynamics
6.1 Fluid Properties, Dimensionless Numbers, and Flow Regimes 6.2 Bernoulli Equation and Mechanical Energy Balances 6.3 Flow Measurement and Fluid Machinery 6.4 Compressible and Non-Newtonian Flows
7 Chapter 7: Thermodynamics
7.1 Thermodynamic Properties, Ideal Gas, and State Equations 7.2 Laws of Thermodynamics and Cyclic Processes 7.3 Vapor-Liquid Equilibrium (VLE) and Phase Equilibrium 7.4 Chemical Equilibrium, Heats of Reaction, and Mixing
8 Chapter 8: Material and Energy Balances
8.1 Steady-State Material Balances 8.2 Unsteady-State Mass Balances 8.3 Steady-State Energy Balances 8.4 Unsteady-State Energy Balances
9 Chapter 9: Heat Transfer
9.1 Conduction, Convection, and Radiation Fundamentals 9.2 Heat Transfer Coefficients, Fouling, and Overall U 9.3 Heat Exchanger Design
10 Chapter 10: Mass Transfer and Separation
10.1 Diffusion Fundamentals 10.2 Gas Absorption, Stripping, and Liquid-Liquid Extraction 10.3 Distillation and McCabe-Thiele Method 10.4 Continuous Contact Methods, Membrane Separations, and Evaporative Operations
11 Chapter 11: Solids Handling
11.1 Particle Properties and Solid Processing 11.2 Solids Transportation and Storage
12 Chapter 12: Chemical Reaction Engineering
12.1 Reaction Kinetics and Performance Metrics 12.2 Ideal Reactor Design 12.3 Multiple Reactions, Catalysis, and Heterogeneous Kinetics
13 Chapter 13: Economics
13.1 Time Value of Money and Project Selection 13.2 Profitability Analysis, Depreciation, and Break-Even
14 Chapter 14: Process Design
14.1 Process Flowsheets and Instrumentation 14.2 Equipment Selection, Sizing, and Cost Estimation 14.3 Process Optimization, Sustainability, and Inherently Safer Design
15 Chapter 15: Process Control
15.1 Process Dynamics and Transfer Functions 15.2 Feedback Control Loops, PID Tuning, and Control Hardware
16 Chapter 16: Safety, Health, and Environment
16.1 Flammability, Toxicity, and Industrial Hygiene 16.2 Hazard Identification and Risk Analysis 16.3 Overpressure Relief, Reactivity Hazards, and Waste Regulations
17 Chapter 17: Ethics and Professional Practice
17.1 Professional Codes of Ethics and Public Welfare 17.2 Intellectual Property, Contracts, and Professional Liability
7.1 Thermodynamic Properties, Ideal Gas, and State Equations
Key Takeaways Explain This Topic AI
Thermodynamic state properties are divided into intensive (e.g., pressure, temperature) and extensive (e.g., volume, entropy) variables.
Fundamental relations like dU = TdS - PdV and dG = -SdT + VdP yield the Maxwell relations by exact differential properties.
The compressibility factor Z = Pv/(RT) measures real gas deviations, using reduced pressure Pr and reduced temperature Tr.
Cubic equations of state like van der Waals and Redlich-Kwong use parameters a and b derived from critical properties to model real gases.
Last updated: July 2026
Thermodynamic State and Fundamental Properties
Thermodynamics in chemical engineering deals with the relationship between heat, work, and the properties of matter. For the NCEES FE Chemical exam, a solid grasp of thermodynamic definitions and mathematical relationships is critical. Properties are categorized as either intensive (independent of the amount of substance, such as temperature T T T , pressure P P P , and specific volume v v v ) or extensive (dependent on system mass, such as total volume V V V , internal energy U U U , and entropy S S S ). State functions (such as U U U , H H H , S S S , A A A , and G G G ) depend only on the current state of the system, not on the path taken to reach it. In contrast, heat ( Q Q Q ) and work ( W W W ) are path functions; their values depend on the specific thermodynamic path of the process.
The fundamental thermodynamic relations combine the First and Second Laws. For a closed system of constant composition undergoing a reversible process, the differential change in internal energy is: d U = T d S − P d V dU = TdS - PdV d U = T d S − P d V
From this definition, other key thermodynamic properties are defined mathematically in the NCEES FE Reference Handbook:
Enthalpy ( H H H ): H = U + P V H = U + PV H = U + P V . Differentiating yields the fundamental equation: d H = T d S + V d P dH = TdS + VdP d H = T d S + V d P
Helmholtz Free Energy ( A A A ): A = U − T S A = U - TS A = U − TS . Differentiating yields: d A = − S d T − P d V dA = -SdT - PdV d A = − S d T − P d V
Gibbs Free Energy ( G G G ): G = H − T S G = H - TS G = H − TS . Differentiating yields: d G = − S d T + V d P dG = -SdT + VdP d G = − S d T + V d P
These differential relations lead directly to the Maxwell relations via the mathematical properties of exact differentials. For example, since d G dG d G is an exact differential, the partial derivatives of its coefficients must be equal: ( ∂ V ∂ T ) P = − ( ∂ S ∂ P ) T \left(\frac{\partial V}{\partial T}\right)_P = -\left(\frac{\partial S}{\partial P}\right)_T ( ∂ T ∂ V ) P = − ( ∂ P ∂ S ) T
These relations allow engineers to express unmeasurable properties like entropy changes in terms of measurable properties like temperature, pressure, and volume.
The Ideal Gas Law and Compressibility Factor
At sufficiently low pressures and high temperatures, all gases behave ideally. The Ideal Gas Law is written as: P V = n R T or P v = R T PV = nRT \quad \text{or} \quad Pv = RT P V = n RT or P v = RT
where P P P is absolute pressure, V V V is total volume, n n n is the number of moles, v v v is molar volume ( V / n V/n V / n ), T T T is absolute temperature, and R R R is the universal gas constant. Candidates must be highly proficient in unit conversions using R R R . In SI units, R = 8.314 J/(mol ⋅ K) = 8.314 kPa ⋅ m 3 /(kmol ⋅ K) R = 8.314 \text{ J/(mol}\cdot\text{K)} = 8.314 \text{ kPa}\cdot\text{m}^3\text{/(kmol}\cdot\text{K)} R = 8.314 J/(mol ⋅ K) = 8.314 kPa ⋅ m 3 /(kmol ⋅ K) . In USCS units, R = 10.73 psia ⋅ ft 3 /(lbmol ⋅ R) = 1545 ft ⋅ lbf/(lbmol ⋅ R) R = 10.73 \text{ psia}\cdot\text{ft}^3\text{/(lbmol}\cdot\text{R)} = 1545 \text{ ft}\cdot\text{lbf/(lbmol}\cdot\text{R)} R = 10.73 psia ⋅ ft 3 /(lbmol ⋅ R) = 1545 ft ⋅ lbf/(lbmol ⋅ R) . Always ensure pressure and temperature are in absolute units (e.g., Kelvin or Rankine, not Celsius or Fahrenheit).
For real gases, intermolecular forces and finite molecular volume cause deviations from ideal behavior. The degree of deviation is quantified by the compressibility factor ( Z Z Z ): Z = P v R T Z = \frac{Pv}{RT} Z = RT P v
For an ideal gas, Z = 1 Z = 1 Z = 1 . When Z < 1 Z < 1 Z < 1 , attractive forces dominate, making the gas easier to compress than an ideal gas. When Z > 1 Z > 1 Z > 1 , repulsive forces dominate, making the gas harder to compress.
According to the three-parameter Theorem of Corresponding States , all gases exhibit the same deviation from ideal behavior when compared at the same reduced temperature ( T r T_r T r ) and reduced pressure ( P r P_r P r ): T r = T T c , P r = P P c T_r = \frac{T}{T_c}, \quad P_r = \frac{P}{P_c} T r = T c T , P r = P c P
where T c T_c T c and P c P_c P c are the critical temperature and pressure of the gas. The compressibility factor Z Z Z can be read from generalized compressibility charts in the FE Reference Handbook as a function of T r T_r T r and P r P_r P r . If molar volume is sought, the pseudo-reduced specific volume ( v r ′ v'_r v r ′ ) is used: v r ′ = v R T c / P c v'_r = \frac{v}{R T_c / P_c} v r ′ = R T c / P c v
Real Gas Equations of State
When high precision is required, semi-empirical cubic equations of state (EOS) are utilized. The two most common cubic equations on the FE Chemical exam are the van der Waals and Redlich-Kwong equations of state.
The van der Waals (vdW) equation accounts for intermolecular attraction (via parameter a a a ) and molecular volume (via parameter b b b ): ( P + a v 2 ) ( v − b ) = R T \left(P + \frac{a}{v^2}\right)(v - b) = RT ( P + v 2 a ) ( v − b ) = RT
where v v v is the molar volume. The parameters a a a and b b b are determined from the critical properties by forcing the first and second derivatives of pressure with respect to volume to zero at the critical point: a = 27 R 2 T c 2 64 P c , b = R T c 8 P c a = \frac{27 R^2 T_c^2}{64 P_c}, \quad b = \frac{R T_c}{8 P_c} a = 64 P c 27 R 2 T c 2 , b = 8 P c R T c
The Redlich-Kwong (RK) equation improves upon the vdW equation by introducing a temperature dependence in the attractive term: P = R T v − b − a T 0.5 v ( v + b ) P = \frac{RT}{v - b} - \frac{a}{T^{0.5} v (v + b)} P = v − b RT − T 0.5 v ( v + b ) a
The parameters a a a and b b b for the RK equation are defined in the FE Reference Handbook as: a = 0.42748 R 2 T c 2.5 P c , b = 0.08664 R T c P c a = 0.42748 \frac{R^2 T_c^{2.5}}{P_c}, \quad b = 0.08664 \frac{R T_c}{P_c} a = 0.42748 P c R 2 T c 2.5 , b = 0.08664 P c R T c
- Equation of State Pressure Formula Parameter a a a Parameter b b b
- Ideal Gas P = R T v P = \frac{RT}{v} P = v RT 0 0 0 0 0 0
van der Waals P = R T v − b − a v 2 P = \frac{RT}{v - b} - \frac{a}{v^2} P = v − b RT − v 2 a 27 R 2 T c 2 64 P c \frac{27 R^2 T_c^2}{64 P_c} 64 P c 27 R 2 T c 2 R T c 8 P c \frac{R T_c}{8 P_c} 8 P c R T c
Redlich-Kwong P = R T v − b − a T 0.5 v ( v + b ) P = \frac{RT}{v - b} - \frac{a}{T^{0.5} v (v + b)} P = v − b RT − T 0.5 v ( v + b ) a 0.42748 R 2 T c 2.5 P c 0.42748 \frac{R^2 T_c^{2.5}}{P_c} 0.42748 P c R 2 T c 2.5 0.08664 R T c P c 0.08664 \frac{R T_c}{P_c} 0.08664 P c R T c
Worked Example: Real Gas Pressure Calculation
Determine the pressure exerted by 1.0 kmol 1.0 \text{ kmol} 1.0 kmol of methane ( C H 4 CH_4 C H 4 ) confined to a volume of 0.15 m 3 0.15 \text{ m}^3 0.15 m 3 at 200 K 200 \text{ K} 200 K using the van der Waals equation of state. Methane critical properties are T c = 190.6 K T_c = 190.6 \text{ K} T c = 190.6 K and P c = 46.0 bar = 4600 kPa P_c = 46.0 \text{ bar} = 4600 \text{ kPa} P c = 46.0 bar = 4600 kPa . The universal gas constant is R = 8.314 kPa ⋅ m 3 /(kmol ⋅ K) R = 8.314 \text{ kPa}\cdot\text{m}^3\text{/(kmol}\cdot\text{K)} R = 8.314 kPa ⋅ m 3 /(kmol ⋅ K) .
Step 1: Calculate parameters a a a and b b b . a = 27 ( 8.314 ) 2 ( 190.6 ) 2 64 ( 4600 ) = 27 ( 69.12 ) ( 36328.36 ) 294400 = 67784347 294400 ≈ 230.2 kPa ⋅ ( m 3 / kmol ) 2 a = \frac{27 (8.314)^2 (190.6)^2}{64 (4600)} = \frac{27 (69.12) (36328.36)}{294400} = \frac{67784347}{294400} \approx 230.2 \text{ kPa}\cdot(\text{m}^3/\text{kmol})^2 a = 64 ( 4600 ) 27 ( 8.314 ) 2 ( 190.6 ) 2 = 294400 27 ( 69.12 ) ( 36328.36 ) = 294400 67784347 ≈ 230.2 kPa ⋅ ( m 3 / kmol ) 2 b = ( 8.314 ) ( 190.6 ) 8 ( 4600 ) = 1584.6 36800 ≈ 0.0431 m 3 / kmol b = \frac{(8.314) (190.6)}{8 (4600)} = \frac{1584.6}{36800} \approx 0.0431 \text{ m}^3/\text{kmol} b = 8 ( 4600 ) ( 8.314 ) ( 190.6 ) = 36800 1584.6 ≈ 0.0431 m 3 / kmol
Step 2: Calculate the molar volume v v v . v = V n = 0.15 m 3 1.0 kmol = 0.15 m 3 / kmol v = \frac{V}{n} = \frac{0.15 \text{ m}^3}{1.0 \text{ kmol}} = 0.15 \text{ m}^3/\text{kmol} v = n V = 1.0 kmol 0.15 m 3 = 0.15 m 3 / kmol
Step 3: Solve for pressure P P P . P = R T v − b − a v 2 P = \frac{RT}{v - b} - \frac{a}{v^2} P = v − b RT − v 2 a P = ( 8.314 ) ( 200 ) 0.15 − 0.0431 − 230.2 ( 0.15 ) 2 P = \frac{(8.314) (200)}{0.15 - 0.0431} - \frac{230.2}{(0.15)^2} P = 0.15 − 0.0431 ( 8.314 ) ( 200 ) − ( 0.15 ) 2 230.2 P = 1662.8 0.1069 − 230.2 0.0225 P = \frac{1662.8}{0.1069} - \frac{230.2}{0.0225} P = 0.1069 1662.8 − 0.0225 230.2 P = 15555 kPa − 10231 kPa = 5324 kPa = 53.2 bar P = 15555 \text{ kPa} - 10231 \text{ kPa} = 5324 \text{ kPa} = 53.2 \text{ bar} P = 15555 kPa − 10231 kPa = 5324 kPa = 53.2 bar
Comparing this to the ideal gas law ( P = R T / v = ( 8.314 × 200 ) / 0.15 = 11085 kPa P = RT/v = (8.314 \times 200)/0.15 = 11085 \text{ kPa} P = RT / v = ( 8.314 × 200 ) /0.15 = 11085 kPa ), the real gas pressure is significantly lower due to the strong attractive forces represented by parameter a a a , which is expected since T = 200 K T = 200 \text{ K} T = 200 K is very close to the critical temperature ( 190.6 K 190.6 \text{ K} 190.6 K ).