Study guide

1.1 FE Civil Exam Facts (2026)

FE Civil Fundamentals of Engineering — Civil

Track your progress as you read

Finished sections get a check mark.

1 Introduction & FE Civil Exam Strategy

1.1 FE Civil Exam Facts (2026) 1.2 Mastering the NCEES FE Reference Handbook 1.3 Computational Tools & Numerical Methods 1.4 Study Plan, Pacing & Exam-Day Logistics

2 Mathematics, Probability, Statistics & General Topics

2.1 Mathematics (Algebra, Trigonometry, Geometry & Calculus) 2.2 Probability & Statistics 2.3 Engineering Sciences 2.4 Ethics & Professional Practice 2.5 Engineering Economics

3 Statics, Dynamics & Mechanics of Materials

3.1 Statics I: Resultants, Equilibrium & Trusses 3.2 Statics II: Friction, Centroids & Moment of Inertia 3.3 Dynamics (Kinematics & Kinetics) 3.4 Mechanics of Materials I: Stress, Strain & Axial Loading 3.5 Mechanics of Materials II: Beams, Torsion, Bending & Columns 3.6 Civil Engineering Materials

4 Fluid Mechanics, Hydraulics & Water Resources

4.1 Fluid Properties & Fluid Statics 4.2 Fluid Dynamics: Continuity, Bernoulli & Momentum 4.3 Hydraulics: Pipe Flow, Open Channel & Pumps 4.4 Hydrologic Systems 4.5 Environmental Engineering (Water & Wastewater)

5 Geotechnical & Structural Engineering

5.1 Soil Classification & Index Properties 5.2 Soil Mechanics: Effective Stress, Consolidation & Shear Strength 5.3 Foundations, Retaining Walls & Slope Stability 5.4 Structural Analysis 5.5 Structural Design (Steel & Reinforced Concrete) 5.6 Loads, Load Combinations & Design Codes

6 Transportation, Construction & Surveying

6.1 Transportation: Geometric Design 6.2 Transportation: Traffic Engineering & Pavement 6.3 Construction: Scheduling, Earthwork & Estimating 6.4 Construction: Means, Methods & Safety 6.5 Surveying

1.1 FE Civil Exam Facts (2026)

Key Takeaways Explain This Topic AI

The FE Civil exam has 110 questions in a 6-hour appointment (~5h20m to answer, 8-min tutorial, 25-min optional break).

It is delivered as a computer-based test (CBT) at Pearson VUE, open ONLY to the searchable electronic NCEES FE Reference Handbook.

Pass/fail is set by a psychometric cut score — there is no fixed percentage, and first-time pass rates run roughly 58–60%.

Passing the Fundamentals of Engineering (FE) exam is the first step to Professional Engineer (PE) licensure and earns Engineer-in-Training (EIT/EI) status.

Content spans 17 knowledge areas, weighted heavily toward Geotechnical, Hydraulics/Hydrology, Structural, Transportation, and Construction.

Last updated: June 2026

What the FE Civil Exam Is

The Fundamentals of Engineering (FE) Civil exam is the first of two exams the National Council of Examiners for Engineering and Surveying ( NCEES ) administers on the path to becoming a licensed Professional Engineer (PE) . It is typically taken near graduation from an ABET-accredited program. Passing it grants Engineer-in-Training (EIT) or Engineer Intern (EI) status — a credential you hold while accumulating the supervised experience (usually four years) required before sitting for the PE exam.

The FE Civil is one of seven discipline-specific FE exams. It is widely regarded as broad — it samples nearly the entire civil curriculum — so the challenge is coverage and speed, not narrow depth. You do not need to ace any single topic; you need competent, fast recall across all 17 knowledge areas.

Exam Logistics at a Glance

  • Fact Detail (2026)
  • Questions 110 (multiple-choice + alternative item types)
  • Total appointment 6 hours
  • Answering time ~ 5 hours 20 minutes
  • Tutorial ~ 8 minutes (does not count against answering time)
  • Scheduled break ~ 25 minutes (optional; clock stops)
  • Delivery Computer-based test ( CBT ) at Pearson VUE centers
  • Reference Searchable electronic NCEES FE Reference Handbook ONLY
  • Calculator NCEES-approved models only (no others permitted)
  • Scheduling Year-round , by appointment
  • Scoring Pass/fail via psychometric cut score (no fixed %)
  • First-time pass rate ≈ 58–60%
  • Result Pass earns EIT/EI ; step 1 toward PE

You cannot bring notes, books, or your own calculator beyond the approved list. The Handbook is provided on-screen as a searchable PDF — there is no paper copy. Pearson VUE supplies a basic on-screen calculator, but most examinees use their own approved physical calculator.

The 17 Knowledge Areas

NCEES publishes a content specification listing the approximate number of questions per area. The counts below are typical ranges — the heaviest areas (Geotechnical, Hydraulics/Hydrology, Structural, Transportation, Construction) deserve the most study time because they collectively make up nearly half the exam.

  • # Knowledge Area Approx. Questions
  • 1 Mathematics 7–11
  • 2 Probability & Statistics 4–6
  • 3 Computational Tools 4–6
  • 4 Ethics & Professional Practice 4–6
  • 5 Engineering Economics 4–6
  • 6 Statics 7–11
  • 7 Dynamics 4–6
  • 8 Mechanics of Materials 7–11
  • 9 Materials 4–6
  • 10 Fluid Mechanics 7–11
  • 11 Hydraulics & Hydrologic Systems 8–12
  • 12 Environmental Engineering 6–9
  • 13 Structural Engineering 8–12
  • 14 Geotechnical Engineering 9–14
  • 15 Transportation Engineering 8–12
  • 16 Construction Engineering 8–12
  • 17 Surveying 6–9

Note the asymmetry: Geotechnical can be the single largest block (up to 14 questions), while several foundational topics (Probability, Dynamics, Materials, Economics) are only 4–6 each. Plan study hours proportionally — a wasted week perfecting Dynamics yields at most 6 questions, whereas the same week on Geotechnical or Structural can move 12+.

Why the Format Shapes Strategy

Because scoring is a cut score rather than a fixed percentage, you never know your exact target — NCEES equates each form so a given scaled score means the same competence regardless of which question set you saw. Practically, aim to answer every question (there is no penalty for guessing) and to bank correct answers across many areas rather than chasing perfection in one.

The year-round, on-demand scheduling means you control your timeline: book when you are ready, and rebook quickly if needed (NCEES limits attempts to three per 12-month period). The open-Handbook format is the single biggest strategic lever — it converts the exam from a memorization test into a retrieval-and-application test. Sections 1.2–1.4 build the Handbook fluency, computational discipline, and pacing plan that turn this format to your advantage.

Eligibility, Registration, and Results

Most states allow you to sit for the FE as a senior in an ABET-accredited engineering program — you do not need a degree in hand or any work experience. You register directly through your MyNCEES account, pay the exam fee (currently $175), and then schedule a seat at a Pearson VUE center. After registering you immediately gain access to download the exact FE Reference Handbook PDF you'll use on test day; start studying from that file the same week.

Results are typically posted to your MyNCEES account within 7–10 days as a simple pass/fail — NCEES does not release a numeric score to passers. If you do not pass, the report breaks performance down by knowledge area so you can target the retake. You may attempt the FE up to three times in a 12-month period , with a mandatory wait between attempts, and there is no lifetime cap on total attempts.

Keep three deadlines in view: register early enough to get your preferred date (popular centers fill up), confirm your government photo ID is unexpired and name-matched, and build your study calendar backward from your scheduled date so the heavy civil areas get the most weeks.