Study guide

3.3 Dynamics (Kinematics & Kinetics)

FE Civil Fundamentals of Engineering — Civil

Track your progress as you read

Finished sections get a check mark.

1 Introduction & FE Civil Exam Strategy

1.1 FE Civil Exam Facts (2026) 1.2 Mastering the NCEES FE Reference Handbook 1.3 Computational Tools & Numerical Methods 1.4 Study Plan, Pacing & Exam-Day Logistics

2 Mathematics, Probability, Statistics & General Topics

2.1 Mathematics (Algebra, Trigonometry, Geometry & Calculus) 2.2 Probability & Statistics 2.3 Engineering Sciences 2.4 Ethics & Professional Practice 2.5 Engineering Economics

3 Statics, Dynamics & Mechanics of Materials

3.1 Statics I: Resultants, Equilibrium & Trusses 3.2 Statics II: Friction, Centroids & Moment of Inertia 3.3 Dynamics (Kinematics & Kinetics) 3.4 Mechanics of Materials I: Stress, Strain & Axial Loading 3.5 Mechanics of Materials II: Beams, Torsion, Bending & Columns 3.6 Civil Engineering Materials

4 Fluid Mechanics, Hydraulics & Water Resources

4.1 Fluid Properties & Fluid Statics 4.2 Fluid Dynamics: Continuity, Bernoulli & Momentum 4.3 Hydraulics: Pipe Flow, Open Channel & Pumps 4.4 Hydrologic Systems 4.5 Environmental Engineering (Water & Wastewater)

5 Geotechnical & Structural Engineering

5.1 Soil Classification & Index Properties 5.2 Soil Mechanics: Effective Stress, Consolidation & Shear Strength 5.3 Foundations, Retaining Walls & Slope Stability 5.4 Structural Analysis 5.5 Structural Design (Steel & Reinforced Concrete) 5.6 Loads, Load Combinations & Design Codes

6 Transportation, Construction & Surveying

6.1 Transportation: Geometric Design 6.2 Transportation: Traffic Engineering & Pavement 6.3 Construction: Scheduling, Earthwork & Estimating 6.4 Construction: Means, Methods & Safety 6.5 Surveying

3.3 Dynamics (Kinematics & Kinetics)

Key Takeaways Explain This Topic AI

Constant-acceleration kinematics: v = v₀ + at, s = s₀ + v₀t + ½at², and v² = v₀² + 2a(s − s₀).

Projectile motion superposes constant horizontal velocity with vertical free-fall at g = 32.2 ft/s² (9.81 m/s²).

Newton's second law ΣF = ma governs kinetics; for circular motion the net inward force is m·v²/r.

The work-energy principle states net work equals the change in kinetic energy: W = ½m(v₂² − v₁²).

Impulse equals change in momentum: F·Δt = m·Δv; conserved when no external impulse acts.

Last updated: June 2026

Kinematics — Describing Motion

Kinematics describes motion (position, velocity, acceleration) without regard to forces. For constant acceleration a , the NCEES FE Reference Handbook lists three equations every FE Civil candidate must apply fluently:

  • v = v₀ + a·t
  • s = s₀ + v₀·t + ½·a·t²
  • v² = v₀² + 2·a·(s − s₀)

Here v is velocity (ft/s or m/s), a is acceleration (ft/s² or m/s²), s is position, and t is time. Pick the equation that omits the variable you don't have. Velocity is the time derivative of position, v = ds/dt, and acceleration is a = dv/dt; when acceleration is not constant you must integrate or differentiate rather than use the three formulas above.

Projectile motion

A projectile combines constant horizontal velocity (no horizontal force, neglecting air resistance) with vertical free fall at the gravitational acceleration g = 32.2 ft/s² (9.81 m/s²) :

  • Horizontal: x = v₀·cos θ · t
  • Vertical: y = v₀·sin θ · t − ½·g·t²

The two motions share only time t. At the peak, vertical velocity is zero. A classic trap is forgetting that horizontal velocity stays constant throughout the flight.

The time of flight, range, and maximum height all follow from these two equations. For a projectile launched and landing at the same elevation, the maximum height is H = (v₀ sin θ)²/(2g) and the horizontal range is R = v₀² sin(2θ)/g, which is maximized at a launch angle of 45°. On the FE Civil exam these surface in transportation (vehicle dynamics) and water-jet contexts, so recognizing the underlying projectile model is as important as the algebra.

Kinetics — Newton's Second Law

Kinetics relates forces to motion through Newton's second law :

ΣF = m·a

where m is mass (slugs in US Customary units, kg in SI) and a is acceleration. A pervasive units trap: weight W = m·g , so mass in slugs = W / 32.2 when weight is in pounds. Never plug a weight in pounds directly in for mass.

Friction during motion

Once a body slides, kinetic friction F = μk·N acts opposite the velocity. On an incline of angle θ, a block sliding down has net force m·a = W·sin θ − μk·W·cos θ, giving a = g(sin θ − μk·cos θ) .

Circular & rotational motion

For a body moving in a circle of radius r, the inward (centripetal) acceleration is a_n = v²/r , requiring a net inward force F = m·v²/r . Rotational kinematics mirror the linear forms with angular quantities: ω = ω₀ + α·t and θ = ω₀·t + ½·α·t², where ω is angular velocity (rad/s) and α is angular acceleration (rad/s²). Tangential speed relates to angular speed by v = r·ω , and tangential acceleration by a_t = r·α. The total acceleration of a point on a rotating body combines the tangential component (a_t, changing speed) and the normal/centripetal component (a_n = v²/r = r·ω², changing direction) at right angles, so its magnitude is √(a_t² + a_n²).

  • Linear Rotational analog
  • Force F Torque τ = I·α
  • Mass m Mass moment of inertia I
  • v = v₀ + at ω = ω₀ + αt
  • KE = ½mv² KE = ½Iω²

Energy & Momentum Methods

Two powerful shortcuts avoid solving for acceleration and time.

Work-energy principle

The net work done on a body equals its change in kinetic energy :

W_net = ΔKE = ½·m·v₂² − ½·m·v₁²

Work by a constant force is W = F·d·cos θ. Gravitational potential energy is PE = m·g·h ; a spring stores ½·k·x². When only conservative forces act, mechanical energy is conserved : KE₁ + PE₁ = KE₂ + PE₂.

Impulse-momentum

Linear momentum is p = m·v. The impulse-momentum theorem:

F·Δt = m·v₂ − m·v₁

If no net external impulse acts, momentum is conserved — the basis for collision problems: m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'. The coefficient of restitution e (0 ≤ e ≤ 1) characterizes the collision: e = 1 is perfectly elastic (kinetic energy conserved) and e = 0 is perfectly plastic (the bodies stick together and move with a common velocity). It is defined as the ratio of relative separation velocity to relative approach velocity, e = (v₂' − v₁')/(v₁ − v₂). Momentum is always conserved in a collision, but kinetic energy is conserved only when e = 1.

Worked Example — Stopping Distance

A car travels at v₀ = 60 ft/s and decelerates at a = −10 ft/s². How far does it travel before stopping (v = 0)?

Use v² = v₀² + 2a·s with v = 0:

0 = (60)² + 2(−10)·s → 0 = 3600 − 20·s → s = 3600/20 = 180 ft

Alternatively by work-energy: the friction work ½·m·v₀² is dissipated; the mass cancels, confirming the result depends only on speed and deceleration — a useful check.

A second worked check by impulse-momentum: if the deceleration came from a constant braking force F over time Δt, then F·Δt = m·Δv, and the time to stop is Δt = v₀/|a| = 60/10 = 6 s. Choosing the right method — kinematics for distance, work-energy when forces and distances are known, impulse-momentum when forces and times are known — is the real skill the exam tests, not any single formula.