Study guide
Advanced Treatment: MBR, GAC & RO
FE Environmental Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction, Mathematics & Ethics
Exam Format, NCEES CBT Logistics & Blueprint Map Calculus & Differential Equations Probability, Statistics & Regression Numerical Methods & Engineering Math Mathematics Applications for Environmental FE
2 Ethics, Economics & Materials
NCEES Model Rules & Engineering Ethics Professional Practice, Liability & Public Safety Engineering Economics: Time Value of Money Benefit-Cost, Replacement & Inflation Analysis Materials: Concrete, Corrosion & Polymers
3 Environmental Science & Chemistry
Geosynthetics & Environmental Materials Environmental Chemistry & Stoichiometry Water Chemistry: pH, Alkalinity & Hardness Microbiology, BOD Kinetics & Monod Growth Henry's Law & Phase Equilibrium for Air Quality
4 Risk Assessment & Water Resources
Environmental Science Applications EPA Four-Step Risk Assessment Paradigm Exposure, Dose, Hazard Quotient & Cancer Risk Hydrology & Rainfall-Runoff Analysis Open-Channel Flow & Manning Equation
5 Groundwater & Water Treatment
Groundwater: Darcy, Theis & Cooper-Jacob Streeter-Phelps & Water-Quality Modeling Water Treatment: Sedimentation & Filtration Disinfection, CT Rule & Chlorination Wastewater: Activated Sludge & BOD Removal
6 Advanced Treatment & Air Quality
Advanced Treatment: MBR, GAC & RO Sludge Handling & Water Reuse NAAQS, Criteria Pollutants, HAPs & AQI Gaussian Plume, Pasquill Stability & Effective Stack Height AP-42 Factors & Air Pollution Control Technologies
7 Air Permitting & Solid/Hazardous Waste
PSD, NSR, BACT, LAER, Title V & Offsets RCRA Lists, Characteristics & Generator Categories Subtitle D Landfill Design, Liners & Leachate CERCLA, UST, TCLP & Land Disposal Restrictions MSW Collection, Transfer, Composting, WTE & Recycling
8 Sustainability, EHS & Exam Day
LCA Stages, Carbon Footprint & Scope 1/2/3 Emissions LEED Credits, ISO 14001 EMS & Triple Bottom Line PELs, TLVs, Hierarchy of Controls & Confined Spaces EPCRA Reporting, TRI Form R, DOT Hazmat & RCRA Manifests Exam Format, NCEES CBT Logistics & Blueprint Map
Advanced Treatment: MBR, GAC & RO
Key Takeaways Explain This Topic AI
MBR combines biology with membrane filtration.
GAC adsorbs trace organics.
RO rejects ions under high pressure.
MF/UF remove particles and pathogens.
Brine disposal limits RO recovery.
Last updated: July 2026
Quick Answer: MBR = biology + membranes. GAC = adsorption. RO = desalination/reuse.
Membrane Spectrum
- Process Rejection
- MF/UF Particles, bacteria
- NF Divalent ions
- RO Monovalent ions
- MBR
Eliminates clarifier; higher MLSS; excellent effluent for reuse.
GAC
Freundlich/Langmuir isotherms; replace at breakthrough.
RO
Applied pressure must exceed osmotic pressure; concentrate disposal is key constraint.
Multi-Step Workflow
List givens with units, select the governing relationship, convert to a consistent unit set, solve, and compare to a rough estimate.
Advanced Treatment: MBR, GAC, RO
- Process Mechanism Typical target
- MBR Membrane + activated sludge High-quality effluent, reuse
- GAC Adsorption Organics, taste/odor, some micropollutants
- RO Pressure-driven membrane Desalting, TDS reduction
- Ion exchange Resin exchange Hardness, nitrate, perchlorate
- UV/AOP Photolysis/radicals Disinfection, micropollutants
- Design Cues
MBR replaces secondary clarifier; fouling and transmembrane pressure matter. RO requires pretreatment (antiscalant, cartridge filters) and produces concentrate brine that needs management. GAC breakthrough defines bed life — empty bed contact time (EBCT) appears in conceptual stems.
On the Exam: Match contaminant to process: pathogens → disinfection/UV; TDS → RO; dissolved organics → GAC; nutrients → biological BNR — not RO first for BOD.
Advanced Treatment: MBR, GAC, RO
- Process Mechanism Typical target
- MBR Membrane + activated sludge High-quality effluent, reuse
- GAC Adsorption Organics, taste/odor, some micropollutants
- RO Pressure-driven membrane Desalting, TDS reduction
- Ion exchange Resin exchange Hardness, nitrate, perchlorate
- UV/AOP Photolysis/radicals Disinfection, micropollutants
- Design Cues
MBR replaces secondary clarifier; fouling and transmembrane pressure matter. RO requires pretreatment (antiscalant, cartridge filters) and produces concentrate brine that needs management. GAC breakthrough defines bed life — empty bed contact time (EBCT) appears in conceptual stems.
On the Exam: Match contaminant to process: pathogens → disinfection/UV; TDS → RO; dissolved organics → GAC; nutrients → biological BNR — not RO first for BOD.
Advanced Treatment: MBR, GAC, RO
- Process Mechanism Typical target
- MBR Membrane + activated sludge High-quality effluent, reuse
- GAC Adsorption Organics, taste/odor, some micropollutants
- RO Pressure-driven membrane Desalting, TDS reduction
- Ion exchange Resin exchange Hardness, nitrate, perchlorate
- UV/AOP Photolysis/radicals Disinfection, micropollutants
- Design Cues
MBR replaces secondary clarifier; fouling and transmembrane pressure matter. RO requires pretreatment (antiscalant, cartridge filters) and produces concentrate brine that needs management. GAC breakthrough defines bed life — empty bed contact time (EBCT) appears in conceptual stems.
On the Exam: Match contaminant to process: pathogens → disinfection/UV; TDS → RO; dissolved organics → GAC; nutrients → biological BNR — not RO first for BOD.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
MBR Flux and Fouling
Typical flux 15–25 L/m²·h; membrane cleaning (CIP) restores permeability. MLSS 8–12 g/L vs 3–5 in conventional AS.
GAC Breakthrough
EBCT 10–20 min for taste/odor; virgin vs reactivated carbon. Isotherm lab test sizes dose.
RO Recovery and Brine
50% recovery on seawater → concentrate 2× salinity — scaling limits (CaSO₄, silica). Antiscalant dosing required.
Energy Comparison
RO ~3–6 kWh/m³ seawater; MBR adds 0.5–1 kWh/m³ over conventional AS for air scour and pumping.
Worked Example
Feed TDS 35,000 mg/L, 50% recovery → permeate ~175 mg/L (99.5% rejection illustrative), concentrate ~70,000 mg/L — brine disposal cost drives feasibility.