Study guide

Environmental Chemistry & Stoichiometry

FE Environmental Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction, Mathematics & Ethics

Exam Format, NCEES CBT Logistics & Blueprint Map Calculus & Differential Equations Probability, Statistics & Regression Numerical Methods & Engineering Math Mathematics Applications for Environmental FE

2 Ethics, Economics & Materials

NCEES Model Rules & Engineering Ethics Professional Practice, Liability & Public Safety Engineering Economics: Time Value of Money Benefit-Cost, Replacement & Inflation Analysis Materials: Concrete, Corrosion & Polymers

3 Environmental Science & Chemistry

Geosynthetics & Environmental Materials Environmental Chemistry & Stoichiometry Water Chemistry: pH, Alkalinity & Hardness Microbiology, BOD Kinetics & Monod Growth Henry's Law & Phase Equilibrium for Air Quality

4 Risk Assessment & Water Resources

Environmental Science Applications EPA Four-Step Risk Assessment Paradigm Exposure, Dose, Hazard Quotient & Cancer Risk Hydrology & Rainfall-Runoff Analysis Open-Channel Flow & Manning Equation

5 Groundwater & Water Treatment

Groundwater: Darcy, Theis & Cooper-Jacob Streeter-Phelps & Water-Quality Modeling Water Treatment: Sedimentation & Filtration Disinfection, CT Rule & Chlorination Wastewater: Activated Sludge & BOD Removal

6 Advanced Treatment & Air Quality

Advanced Treatment: MBR, GAC & RO Sludge Handling & Water Reuse NAAQS, Criteria Pollutants, HAPs & AQI Gaussian Plume, Pasquill Stability & Effective Stack Height AP-42 Factors & Air Pollution Control Technologies

7 Air Permitting & Solid/Hazardous Waste

PSD, NSR, BACT, LAER, Title V & Offsets RCRA Lists, Characteristics & Generator Categories Subtitle D Landfill Design, Liners & Leachate CERCLA, UST, TCLP & Land Disposal Restrictions MSW Collection, Transfer, Composting, WTE & Recycling

8 Sustainability, EHS & Exam Day

LCA Stages, Carbon Footprint & Scope 1/2/3 Emissions LEED Credits, ISO 14001 EMS & Triple Bottom Line PELs, TLVs, Hierarchy of Controls & Confined Spaces EPCRA Reporting, TRI Form R, DOT Hazmat & RCRA Manifests Exam Format, NCEES CBT Logistics & Blueprint Map

Environmental Chemistry & Stoichiometry

Key Takeaways Explain This Topic AI

Balance chemical equations for treatment reactions.

mg/L converts to mol/L using molar mass.

Equivalent weight supports alkalinity and hardness calculations.

Limiting reagent determines product mass in stoichiometry.

1 mg/L ≈ 1 ppm in dilute aqueous solutions.

Last updated: July 2026

Quick Answer: Convert mg/L → mol/L , balance equations, identify limiting reagent , and express results on per-equivalent basis for alkalinity/hardness.

Unit Conversions mol/L = mg/L molar mass (mg/mol) \text{mol/L} = \frac{\text{mg/L}}{\text{molar mass (mg/mol)}} mol/L = molar mass (mg/mol) mg/L ​

Example: 50 mg/L NO₃⁻-N (as N) vs nitrate mass — read whether stem uses as N or as NO₃ .

Balancing Reactions

Chlorination: Cl₂ + H₂O → HOCl + H⁺ + Cl⁻. Lime softening removes hardness as CaCO₃ precipitate.

Limiting Reagent

If 100 mg/L Ca²⁺ and 80 mg/L alkalinity available, precipitation limited by whichever stoichiometry exhausts first.

Alkalinity Equivalents

Alkalinity often reported as CaCO₃ mg/L . 1 meq/L = 50 mg/L as CaCO₃.

Exam Traps

Confusing mg/L as element vs as compound .

Forgetting density ≈ 1 for dilute water when converting ppm.

Multi-Step Workflow

List givens with units, select the governing relationship, convert to a consistent unit set, solve, and compare to a rough estimate.

Stoichiometry for Environmental Engineers

  • Topic Relation FE use
  • Molarity mol/L Dose calculations
  • Normality (acid-base) eq/L Alkalinity titrations
  • COD/BOD stoichiometry O₂ demand Treatment sizing cues
  • Redox half-reactions e⁻ balance Breakpoint chlorination context
  • Worked Stoichiometry

Chlorine dose to oxidize ammonia (simplified breakpoint idea): mass ratios are tested conceptually. If 10 mg/L NH₃-N requires roughly 7.6× Cl₂ by weight at ideal breakpoint, a stem may ask order-of-magnitude dose — compute 10 × 7.6 = 76 10\times7.6=76 10 × 7.6 = 76 mg/L Cl₂ before residual free chlorine appears.

Alkalinity as CaCO₃: 50 50 50 mg/L as CaCO₃ = 1 = 1 = 1 meq/L. Softening and coagulation consume alkalinity — expect questions linking lime dose to alkalinity change.

On the Exam: Always convert mg/L ↔ mmol/L with molar mass before applying reaction ratios.

Stoichiometry for Environmental Engineers

  • Topic Relation FE use
  • Molarity mol/L Dose calculations
  • Normality (acid-base) eq/L Alkalinity titrations
  • COD/BOD stoichiometry O₂ demand Treatment sizing cues
  • Redox half-reactions e⁻ balance Breakpoint chlorination context
  • Worked Stoichiometry

Chlorine dose to oxidize ammonia (simplified breakpoint idea): mass ratios are tested conceptually. If 10 mg/L NH₃-N requires roughly 7.6× Cl₂ by weight at ideal breakpoint, a stem may ask order-of-magnitude dose — compute 10 × 7.6 = 76 10\times7.6=76 10 × 7.6 = 76 mg/L Cl₂ before residual free chlorine appears.

Alkalinity as CaCO₃: 50 50 50 mg/L as CaCO₃ = 1 = 1 = 1 meq/L. Softening and coagulation consume alkalinity — expect questions linking lime dose to alkalinity change.

On the Exam: Always convert mg/L ↔ mmol/L with molar mass before applying reaction ratios.

Stoichiometry for Environmental Engineers

  • Topic Relation FE use
  • Molarity mol/L Dose calculations
  • Normality (acid-base) eq/L Alkalinity titrations
  • COD/BOD stoichiometry O₂ demand Treatment sizing cues
  • Redox half-reactions e⁻ balance Breakpoint chlorination context
  • Worked Stoichiometry

Chlorine dose to oxidize ammonia (simplified breakpoint idea): mass ratios are tested conceptually. If 10 mg/L NH₃-N requires roughly 7.6× Cl₂ by weight at ideal breakpoint, a stem may ask order-of-magnitude dose — compute 10 × 7.6 = 76 10\times7.6=76 10 × 7.6 = 76 mg/L Cl₂ before residual free chlorine appears.

Alkalinity as CaCO₃: 50 50 50 mg/L as CaCO₃ = 1 = 1 = 1 meq/L. Softening and coagulation consume alkalinity — expect questions linking lime dose to alkalinity change.

On the Exam: Always convert mg/L ↔ mmol/L with molar mass before applying reaction ratios.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.

Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.