Study guide
Microbiology, BOD Kinetics & Monod Growth
FE Environmental Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction, Mathematics & Ethics
Exam Format, NCEES CBT Logistics & Blueprint Map Calculus & Differential Equations Probability, Statistics & Regression Numerical Methods & Engineering Math Mathematics Applications for Environmental FE
2 Ethics, Economics & Materials
NCEES Model Rules & Engineering Ethics Professional Practice, Liability & Public Safety Engineering Economics: Time Value of Money Benefit-Cost, Replacement & Inflation Analysis Materials: Concrete, Corrosion & Polymers
3 Environmental Science & Chemistry
Geosynthetics & Environmental Materials Environmental Chemistry & Stoichiometry Water Chemistry: pH, Alkalinity & Hardness Microbiology, BOD Kinetics & Monod Growth Henry's Law & Phase Equilibrium for Air Quality
4 Risk Assessment & Water Resources
Environmental Science Applications EPA Four-Step Risk Assessment Paradigm Exposure, Dose, Hazard Quotient & Cancer Risk Hydrology & Rainfall-Runoff Analysis Open-Channel Flow & Manning Equation
5 Groundwater & Water Treatment
Groundwater: Darcy, Theis & Cooper-Jacob Streeter-Phelps & Water-Quality Modeling Water Treatment: Sedimentation & Filtration Disinfection, CT Rule & Chlorination Wastewater: Activated Sludge & BOD Removal
6 Advanced Treatment & Air Quality
Advanced Treatment: MBR, GAC & RO Sludge Handling & Water Reuse NAAQS, Criteria Pollutants, HAPs & AQI Gaussian Plume, Pasquill Stability & Effective Stack Height AP-42 Factors & Air Pollution Control Technologies
7 Air Permitting & Solid/Hazardous Waste
PSD, NSR, BACT, LAER, Title V & Offsets RCRA Lists, Characteristics & Generator Categories Subtitle D Landfill Design, Liners & Leachate CERCLA, UST, TCLP & Land Disposal Restrictions MSW Collection, Transfer, Composting, WTE & Recycling
8 Sustainability, EHS & Exam Day
LCA Stages, Carbon Footprint & Scope 1/2/3 Emissions LEED Credits, ISO 14001 EMS & Triple Bottom Line PELs, TLVs, Hierarchy of Controls & Confined Spaces EPCRA Reporting, TRI Form R, DOT Hazmat & RCRA Manifests Exam Format, NCEES CBT Logistics & Blueprint Map
Microbiology, BOD Kinetics & Monod Growth
Key Takeaways Explain This Topic AI
BOD measures oxygen demand of biodegradable organics.
First-order BOD kinetics: dL/dt = -kL.
Monod growth: μ = μmax S/(Ks+S).
Activated sludge design uses SRT, HRT, F/M ratio.
Nitrifiers grow slower than heterotrophs — need longer SRT.
Last updated: July 2026
Quick Answer: BOD is oxygen demand . First-order decay for carbonaceous BOD. Monod describes growth vs substrate. SRT controls biomass and nitrification.
BOD Kinetics L t = L 0 e − k d t L_t = L_0 e^{-k_d t} L t = L 0 e − k d t
Ultimate BOD L₀; deoxygenation rate k_d (day⁻¹). NBOD from ammonia oxidized separately.
Monod Equation μ = μ m a x S K s + S \mu = \mu_{max} \frac{S}{K_s + S} μ = μ ma x K s + S S
At low S, growth is first-order in substrate; at high S, μ → μmax.
Activated Sludge Parameters
- Parameter Role
- SRT (θc) Solids retention — nitrification needs ~8–15 d at 20°C
- HRT Hydraulic detention in aeration basin
- F/M Food to microorganism ratio — loading rate
- Oxygen Requirements
1 mg/L NH₃-N oxidized ≈ 4.6 mg/L O₂ stoichiometrically.
Exam Traps
BOD₅ is not ultimate BOD — only fraction in 5 days.
Lower temperature → slower kinetics → longer SRT needed.
Multi-Step Workflow
List givens with units, select the governing relationship, convert to a consistent unit set, solve, and compare to a rough estimate.
BOD Kinetics and Monod Growth
- Model Equation idea Use
- First-order BOD L t = L 0 e − k t L_t=L_0 e^{-kt} L t = L 0 e − k t Stream/BOD remaining
- Ultimate BOD L 0 L_0 L 0 Long-term oxygen demand
Monod μ = μ m a x S / ( K s + S ) \mu=\mu_{max}S/(K_s+S) μ = μ ma x S / ( K s + S ) Activated sludge growth
- F/M food/microorganisms Aeration tank loading
- Worked BOD
If k = 0.23 d − 1 k=0.23\,d^{-1} k = 0.23 d − 1 (base e) and L 0 = 200 L_0=200 L 0 = 200 mg/L, BOD remaining at t=5 d: L 5 = 200 e − 0.23 × 5 ≈ 63 L_5=200 e^{-0.23\times5}\approx 63 L 5 = 200 e − 0.23 × 5 ≈ 63 mg/L. BOD exerted = 200 − 63 = 137 200-63=137 200 − 63 = 137 mg/L.
On the Exam: Confirm whether k k k is base-10 or base-e; NCEES problems state the convention. Mixing them flips the answer.
BOD Kinetics and Monod Growth
- Model Equation idea Use
- First-order BOD L t = L 0 e − k t L_t=L_0 e^{-kt} L t = L 0 e − k t Stream/BOD remaining
- Ultimate BOD L 0 L_0 L 0 Long-term oxygen demand
Monod μ = μ m a x S / ( K s + S ) \mu=\mu_{max}S/(K_s+S) μ = μ ma x S / ( K s + S ) Activated sludge growth
- F/M food/microorganisms Aeration tank loading
- Worked BOD
If k = 0.23 d − 1 k=0.23\,d^{-1} k = 0.23 d − 1 (base e) and L 0 = 200 L_0=200 L 0 = 200 mg/L, BOD remaining at t=5 d: L 5 = 200 e − 0.23 × 5 ≈ 63 L_5=200 e^{-0.23\times5}\approx 63 L 5 = 200 e − 0.23 × 5 ≈ 63 mg/L. BOD exerted = 200 − 63 = 137 200-63=137 200 − 63 = 137 mg/L.
On the Exam: Confirm whether k k k is base-10 or base-e; NCEES problems state the convention. Mixing them flips the answer.
BOD Kinetics and Monod Growth
- Model Equation idea Use
- First-order BOD L t = L 0 e − k t L_t=L_0 e^{-kt} L t = L 0 e − k t Stream/BOD remaining
- Ultimate BOD L 0 L_0 L 0 Long-term oxygen demand
Monod μ = μ m a x S / ( K s + S ) \mu=\mu_{max}S/(K_s+S) μ = μ ma x S / ( K s + S ) Activated sludge growth
- F/M food/microorganisms Aeration tank loading
- Worked BOD
If k = 0.23 d − 1 k=0.23\,d^{-1} k = 0.23 d − 1 (base e) and L 0 = 200 L_0=200 L 0 = 200 mg/L, BOD remaining at t=5 d: L 5 = 200 e − 0.23 × 5 ≈ 63 L_5=200 e^{-0.23\times5}\approx 63 L 5 = 200 e − 0.23 × 5 ≈ 63 mg/L. BOD exerted = 200 − 63 = 137 200-63=137 200 − 63 = 137 mg/L.
On the Exam: Confirm whether k k k is base-10 or base-e; NCEES problems state the convention. Mixing them flips the answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.
Additional review point: verify assumptions, boundary conditions, and whether the problem is steady-state or transient before selecting an answer.